Jump to content

Standing rigging color preference and historical musings


Chuck

Recommended Posts

Hello folks.

 

As some of you know,  I am supplying scale rope in tan and in black.  I am not the biggest fan of using a deep black rope but I know many of you prefer it.   When I ordered my Linen line to make up the rope I also ordered some of their dark Gray/Brown color.   My original though was to also supply it in this color for folks like me who prefer a lighter shade for the standing rigging.  It is easier to see the lay of the rope.  Because it takes so much time to make it...I wanted ask everyone if there is indeed a large enough group that prefers the standing rigging as a dark gray or even deep brown.  I prefer the grayish tone as shown.  I figured I would ask before I spend too much time on it.

 

Anyway...here is a photo of my gray/brown standing rigging next to my black and tan examples.

 

Is this something that would be desired??   If not,  I will just keep it for my own personal use.  It is my opinion that the actual standing rigging was a dark charcoal color after being exposed to the elements and wasnt a deep black.   The brown linen color is OK too but I dont like it as much so it is not pictured.  Its just not dark enough for my taste and looks too even.  The color is slightly darker than it appears in the photo...but I had to pump up the brightness or the black rope would have looked like a black shadow.  I would appreciate  your thoughts on the historical nature of the color of tarred rope as well as your impression of the rope shown.  Spending a week stocking up on it when no one will want it would be a waste.  Thanks in advance  :) 

 

graybrownrope.jpg

 

graybrownrope1.jpg

Link to comment
Share on other sites

Hi Chuck:

 

I prefer the grey or a warm black (black that leans towards a brownish tint).  Of the two choices you show for standing rigging I agree with you that the grey looks better.  I've been dyeing rope using a dark walnut water based wood dye with some blue-black ink in it to darken it - it came out grey with a hint of brown - I like it.

 

Frank

Link to comment
Share on other sites

Chuck

    I am probably a bad source for rigging interest, since once I get to the rigging stage...progress slows to a crawl. 

 

    Like Frank, I like a black with a brown tint, to simulate old pine tar.  I have used black rigging dipped in sepia ink and natural linen dipped in black india ink, then sepia ink.  I like the look, but am not sure how long it will last.  Brown waterbased wood dye intrigues me.

 

   Back on topic.  The dark grey looks interesting but I would like to see its effect as rigging on a model rather than coiled up. 

 

Chuck

Chuck Seiler
San Diego Ship Modelers Guild
Nautical Research Guild

 
Current Build:: Colonial Schooner SULTANA (scratch from Model Expo Plans), Hanseatic Cog Wutender Hund, Pinas Cross Section
Completed:  Missouri Riverboat FAR WEST (1876) Scratch, 1776 Gunboat PHILADELPHIA (Scratch), John Smith Shallop

Link to comment
Share on other sites

Oh, I meant to include...If I could purchase a coil or two of the grey so I could test coloration and work into my PHILADELPHIA (still about a month from rigging) that would be great.  Could you make some without having to go full production?

 

CHuck

Chuck Seiler
San Diego Ship Modelers Guild
Nautical Research Guild

 
Current Build:: Colonial Schooner SULTANA (scratch from Model Expo Plans), Hanseatic Cog Wutender Hund, Pinas Cross Section
Completed:  Missouri Riverboat FAR WEST (1876) Scratch, 1776 Gunboat PHILADELPHIA (Scratch), John Smith Shallop

Link to comment
Share on other sites

Thanks guys...Chuck,  I could absolutely make some.  You just need to tell me what size you need when you get to that point.

 

Then there are the folks who just use the tan color for everything.  That looks good too.

 

panteleymon-victoria.jpg?w=588

 

 

And here is an image recently I believe of the Frigate constitution.   Its more gray than brown.  I have been looking for a model done with brown standing rigging that is very dark but I havent seen too many.  Most are jet black and that is tough to see the lay of the rope like it is shown below.

 

800px-thumbnail.jpg

 

It all quite confusing and hard to to choose.   I cant wait to test out both on a model and see which I prefer.

 

Chuck

Link to comment
Share on other sites

I have never been a fan of black black colors. Real life things are seldom black black. My favorite black paint color is one called "weathered black" by Floquil (unfortunately this will not be available anymore as Floquil is now dead) This was a grayish black which looked gorgeous in things like black ship hulls or car/airplane tires. For my standing rigging I am now using a very dark brown color, but that gray you show looks very nice.

There aren't but two options: do it FAST, or do it RIGHT.

 

Current Project Build Log: Soleil Royal in 1/72. Kit by Artesania Latina.

Last finished projectsRoyal Ship Vasa 1628; French Vessel Royal Louis 1780. 1/90 Scale by Mamoli. 120 Cannons

 

Future projects already in my stash: Panart: San Felipe 1/75; OcCre: Santísima Trinidad 1/90;

Wish List: 1/64 Amati Victory, HMS Enterprise in 1/48 by CAF models.

 

So much to build, so little time!

 

 

Link to comment
Share on other sites

This would be ideal and I am working hard to get there.   Contemporary rigging color...It is not very brown or too black.   Its not too gray and somewhere in between.

 

Chuck

 

gallery_182_450_3108.jpg

Link to comment
Share on other sites

Chuck,

 

I think your grey would be perfect for wire ropes (if laid up right handed).

 

I've been trying to remember to colour of the marline that we used to use when I was at sea - a light cord impregnated with Stockholm tar.  I think it was about Winsor-Newton's burnt umber or possibly Vandyke brown, if that's any help.

 

John

Link to comment
Share on other sites

Thats what I was shooting for.  The image of my rope is not a good photo...to bright.  My gray charcoal looking rope is actually pretty darn close.   I just cant take a picture of it to show.  I will try wwhen I get back from vacation next week.

 

Chuck

Link to comment
Share on other sites

The "tar" that was used on sailing ship line came from pine trees. In fact, the industry is still called "Naval Stores" today. The brown black color, people have mentioned is a good description of what it looks like. It certainly isn't jet black like a piece of black thread. It also isn't light stable it must have started degrading instantly after being coated onto the rigging.

Best

Jaxboat

Edited by Jaxboat
Link to comment
Share on other sites

I would think most will prefer the dark gray and not the black.  I know, if I were purchasing the gray would be my choice.

 

Ropes look awesome.

Happy modeling,

 

Len

 

Current build: HMS Bellerophon semi-scratch from plans of Victory Models HMS Vanguard 

Drydock:  MS Constitution

Completed builds: MS AVS, scratch built Syren, Victory models HMS Fly

Link to comment
Share on other sites

Interesting topic Chuck and very much up to the expectations of the builder respectively the beholder.

 

Historically I do believe the running rigging was a shade of grey as all natural hemp ropes I saw were almost without a tint*.

 

The black I do strongly believe depended upon the tar used. I see no real black as we know it today. First the tint of the coloring is not to be compared to modern products. Then only the elements alone will soon make color disappear resulting in darker shades of grey. My question here is how much the color of the tarred rigging had a ton of brown in it. Many tar products have this brownish soul, especially if deluted. 

 

Then there is the expectations of the classical model making that opposes this. As much as we prefere quality wood with warm tones, many prefer real black standing rigging and light brown for the running one.

 

What perhaps is misleading the eye is that the rigging in real life very much reflects the ambient light. So with sunlight the rigging gets the warmish tone that stays in our minds ...

 

So I can´t tell which color to take, my personal preference is gray for the running rigging and a very very dark brown for the standing rigging but as it is known, I even do put rust of the iron fittings onto my models ;-)

 

Cheers, Daniel

To victory and beyond! http://modelshipworld.com/index.php?/topic/76-hms-victory-by-dafi-to-victory-and-beyond/

See also our german forum for Sailing Ship Modeling and History: http://www.segelschiffsmodellbau.com/

Finest etch parts for HMS Victory 1:100 (Heller Kit), USS Constitution 1:96 (Revell) and other useful bits.

http://dafinismus.de/index_en.html

Link to comment
Share on other sites

  • 3 weeks later...

Thank you guys for the feedback.  Especially all of you who contacted me offline to discuss this topic.  I have now created some tests with a Brownish...very dark.....rope.   After living with both the gray rope as posted in the first photo and the new dark brown below (bottom two photos).  I think I now prefer this darker brown.  Once again its darker than the photos show as I had to pump up the brightness so you could see the lay of the black rope.

 

But I think this color is warmer and more akin to what I have seen on contemporary models although I change my mind a lot.  I will start producing this dark brown Rope this weekend.  Thank you very much guys...I couldnt do it without your input.  And thank you to all the folks who sent me samples to look at as well.  It is crazy to think how much thought there is in deciding what shade of brown or gray to use.  Seems a bit anal but I guess we are all a bit crazy like that.  The three images are of .045 rope by the way...1.14mm

 

If you look at the close up of each rope coil you will see how amazing this cotton linen blend is.  Absolutely no fuzz.  Its amazing stuff.  

 

Chuck

 

graybrownrope.jpg

 

browntestrope2.jpg

 

browntestrope.jpg

Link to comment
Share on other sites

Thanks guys.

 

Right now only left handed...probably for the foreseeable future.  I have too many other irons in the fire.   Stern lantern will be available in just a few weeks.

 

Brian...I will be adding the brown color first.  But if you need or want the gray version instead.  I can make up some to order for you separately.  You just need to tell me what sizes and how many packs.   As far as the cannon carriages are concerned,  the best way to figure out the size is to download the PDf on the cannon page.  Measure it because its to scale.  It shows both sizes.  Print it out on stiff card and place them on your model to see how they would fit before buying them.  Its the only sure way to tell.

 

Chuck

Link to comment
Share on other sites

From the smell of them, I thought the old model's rigging was tarred just like their prototypical counterparts - they always smell like Stockholm tar to me.

Jerry Todd

Click to go to that build log

Constellation ~ RC sloop of war c.1856 in 1:36 scale

Macedonian ~ RC British frigate c.1812 in 1:36 scale

Pride of Baltimore ~ RC Baltimore Clipper c.1981 in 1:20 scale

Gazela Primeiro ~ RC Barkentine c.1979 in 1:36 scale

Naval Guns 1850s~1870s ~ 3D Modeling & Printing

My Web Site

My Thingiverse stuff

Link to comment
Share on other sites

  • 3 weeks later...

In Patrick O'Brian's Aubry/Maturin Series (either the 2nd or 3rd book) O'Brian describes the frigate Lively as having gleaming white (untarred) manila rope for both standing and running rigging. Is this correct? did I misinterpret the book? if it is correct then that would mean on some models one could use white rope for both running and standing rigging wile still being historically correct.

 

Lextin.

Edited by qwerty2008

"I have no special talent. I am only passionately curious." - Albert Einstein.

Link to comment
Share on other sites

  • 2 weeks later...

I am using dark brown in my Vasa, but I think I will use gray in my next Royal Louis build. I like it better.

There aren't but two options: do it FAST, or do it RIGHT.

 

Current Project Build Log: Soleil Royal in 1/72. Kit by Artesania Latina.

Last finished projectsRoyal Ship Vasa 1628; French Vessel Royal Louis 1780. 1/90 Scale by Mamoli. 120 Cannons

 

Future projects already in my stash: Panart: San Felipe 1/75; OcCre: Santísima Trinidad 1/90;

Wish List: 1/64 Amati Victory, HMS Enterprise in 1/48 by CAF models.

 

So much to build, so little time!

 

 

Link to comment
Share on other sites

Chuck,

 

I don't know enough to comment, however you are on my list when its time to order rope. After seeing so many awesome builds here, I know that the kit provided ropes just won't do. Glad to be of future support.

 

PS: Your new lanterns look awesome, but wrong century for my current build (:-(

 

R/   Michael

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

Thanks.  I will eventually carry both the gray and the brown in addition to the black.  It seems as though it is a personal preference thing.   Thats fine with me.    Anyone who wishes something that they dont see.  Dont hesitate to contact me.

 

Chuck

Link to comment
Share on other sites

Thanks.  I will eventually carry both the gray and the brown in addition to the black.  It seems as though it is a personal preference thing.   Thats fine with me.    Anyone who wishes something that they dont see.  Dont hesitate to contact me.

 

Chuck

 

Hi Chuck,

I like the dark brown. What sizes do you supply and how would I purchase some when I need it. I am almost finished with my currect build and would like to use your rope for my next.

 

Thanks,

Vince P.

Link to comment
Share on other sites

  • 3 weeks later...

In Patrick O'Brian's Aubry/Maturin Series (either the 2nd or 3rd book) O'Brian describes the frigate Lively as having gleaming white (untarred) manila rope for both standing and running rigging. Is this correct? did I misinterpret the book? if it is correct then that would mean on some models one could use white rope for both running and standing rigging wile still being historically correct.

 

Lextin.

Interesting. I remember the phrase (in "Post Captain"), but that was before I took much interest in the minutiae of naval practise. A number of online references seem to suggest that tarring is required on hemp for protection against rot, but not on manila.

 

So......

 

I'm guessing that a model with all-white rigging would be criticised, even though it seems to be permissible. 

Link to comment
Share on other sites

Ahoy Chuck :D

 

I believe what you are seeing is that when modeling at smaller scales reducing contrast is key to producing a more realistic effect. Muting colors is commonly  used by plastic modelers and I see no reason why it would not apply to wooden ships.

 On with the Show.... B) 

 

  J.Pett

 

“If you're going through hell, keep going” (Winston Churchill)

 

Current build:  MS Rattlesnake (MS2028)

http://modelshipworld.com/index.php?/topic/45-model-shipways-rattlesnake-ms2028-scale-164th/

 

Side Build: HMS Victory: Corel

http://modelshipworld.com/index.php?/topic/3709-hms-victory-by-jpett-corel-198/?p=104762

 

On the back burner:  1949 Chris Craft Racer: Dumas

http://modelshipworld.com/index.php?/topic/939-1949-chris-craft-racer-by-jpett-dumas-kit-no-1702/

 

Sometime, but not sure when: Frigate Berlin: Corel

http://www.corel-srl.it/pdf/berlin.pdf

 

 

 

 

 

 
 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...