Jump to content

Recommended Posts

Posted (edited)

IMG_0788.thumb.jpeg.a943af2ab2870cf8ed59295f5b23d297.jpeg

Endeavour is a J-class yacht built for the 1934 America's Cup by Camper and Nicholson in Gosport, England. She was built for Thomas Sopwith who used his aviation design expertise to ensure the yacht was the most advanced of its day with a steel hull and mast. She was 130-foot (40 m) and launched in 1934 and won many races in her first season including against the J's Velshedaand Shamrock V. She failed in her America's Cup challenge against the American defender Rainbow but came closer to lifting the cup than any other until Australia II succeeded in 1983.
 

Source: Wikipedia. 
https://en.m.wikipedia.org/wiki/Endeavour_(yacht)

This is a wooden model kit from Amati. 

It was the sleek lines of this beautiful boat that first caught my eye. It is my hope that the model I intend to complete will in some way show that beauty. This is where I am right now:IMG_0738.thumb.jpeg.23d12beb550db4ba2057e7c7e67f907b.jpegIMG_0742.thumb.jpeg.08cb3a562b5c1df090e4ff424fa62488.jpegIMG_0749.thumb.jpeg.78c4c2870641c4ec043d58f4241af86d.jpeg

 

The hull will be getting two layers of planking, these maple strips are the underlying layer, they will be covered with a second layer of walnut planking. I intend to stick to the original colors of the yacht, I really like them. 
 

IMG_0783.thumb.jpeg.02a33951ebde73949ebffe2ed651819c.jpeg

 

The hull has its first layer of planking now. The next step is to smooth out and small bumps and irregularities using a fine wood filler. After a final sanding the second layer can be applied. 
 

IMG_0782.thumb.jpeg.95706c0ef5cc5e416ef49ecb51fe6ef1.jpeg

 

IMG_0784.thumb.jpeg.497f6523c84573c4089bd1000e26540f.jpeg

 

IMG_0780.thumb.jpeg.e8e2f01249b33195b5b776df8118df00.jpeg
 

IMG_0793.thumb.jpeg.b2d9533f5bc858234adf01ef899b4996.jpeg

The hull has been coated with a fine wood putty that was smoothed down with a wet finger. Once dry it will be sanded with 220 grit to even out and small irregularities and make it nice and smooth for the second layer of planking. 
 

IMG_0801.thumb.jpeg.99bc25f4e88b321559ccbb7ae2f7ec4d.jpeg

 

Finally dry and sanded down nice and smooth. It’s quite comforting running my hands along this smooth surface. I am content now that the second layer of planks will sit nicely in this surface. Work on that begins tomorrow. 

Edited by SaltyScot
Media and notes added

On the table:  Endeavour 1934 - J Class Racing Yacht

 

Wishlist: Ernest Shackleton's Endurance (Wikipedia Link) - OCCRE Kit Link

 

The elevator to success is out of order. You’ll have to use the stairs, one step at a time.

— JOE GIRARD

  • The title was changed to Endeavour 1934 by SaltyScot - Amati - 1:80
Posted

Nicely done, good luck on your journey!!

Bob  M.         :cheers:

Start so you can Finish !!

Finished:         The Sea of Galilee Boat-Scott Miller-1:20 ,   Amati } Hannah Ship in a Bottle:Santa Maria : LA  Pinta : La Nana : The Mayflower : Viking Ship Drakkar  The King Of the Mississippi  Artesania Latina  1:80 

 

 Current Build: Royal Yacht, Duchess of Kingston-Vanguard Models :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...