Jump to content

Recommended Posts

Posted

I pray you heal up quickly, Mark. 

Current Builds:  1870's Sternwheeler, Lula

                             Wood Hull Screw Frigate USS Tennessee

                             Decorative Carrack Warship Restoration, the Amelia

 

Completed: 1880s Floating Steam Donkey Pile Driver                       

                       Early Swift 1805 Model Restoration

 

 

Posted
4 hours ago, GrandpaPhil said:

Mark,

  I hope you feel better and heal quickly!

 

Thank you so very much, Phil. Now that it is strapped up I am not in so much pain (or has that got something to do with the two shots of single malt I had 🤔😂

Mark

 

On the table:   Lynx, Baltimore Clipper Schooner - MANTUA - 1:62

 

Awaiting shipyard clearance: HMS Endurance - OcCre - 1:70

 

Wishlist: 1939 Chris Craft Runabout - Garrett Wade - 1:8

 

FinishedEndeavour 1934 - J Class Racing Yacht - 1:80

 

 

Dogs do speak, but only to those who know how to listen

Posted
4 hours ago, Keith Black said:

I pray you heal up quickly, Mark. 

 

I appreciate that, Keith. Thank you for your concern, sir. I will be back n deck in no time.

Mark

 

On the table:   Lynx, Baltimore Clipper Schooner - MANTUA - 1:62

 

Awaiting shipyard clearance: HMS Endurance - OcCre - 1:70

 

Wishlist: 1939 Chris Craft Runabout - Garrett Wade - 1:8

 

FinishedEndeavour 1934 - J Class Racing Yacht - 1:80

 

 

Dogs do speak, but only to those who know how to listen

Posted
9 hours ago, SaltyScot said:

Calamity has struck. It would appear that I have badly damaged the tendons of a couple of fingers in my right hand.

So sorry to hear that, Mark 🥲

 

Do what I would never manage and rest your hand until it is fully healed: Resting includes not replying to every message of sympathy!

 

Trevor

Posted (edited)

Mark,

 

Bad news! Rest up, sit back, relax and enjoy spring. It's gin and tonic time, and you only need one hand for that!

 

Tendons can do strange things. About 15 years back I was tucking a cover between pillows in the couch when there was an audible "snap" and a finger in my left hand stopped working. The tendon broke and I couldn't control the outer two digits. I could feel the broken ends beneath the skin. Bummer!

 

I looked in my medical books and several on-line medical school hand medicine sites and they all said the same thing - splint it and wait. I bent some sheet brass to make a frame for a splint and wrapped it in gauze. I taped it to the finger and changed the bandage every day. A couple weeks later the finger started working again! The broken ends of the tendon grew back together. It is still working as good as new - except for a slight lump under the skin where the ends grew together.

 

So give your hand some rest and it will recover.

 

And then get back to the Lynx! We all would like to see it finished!

Edited by Dr PR

Phil

 

Current build: Vanguard Models 18 foot cutter

Current build: USS Cape MSI-2

Current build: Albatros topsail schooner

Previous build: USS Oklahoma City CLG-5 CAD model

 

Posted
13 hours ago, Kenchington said:

Resting includes not replying to every message of sympathy!

 

Well my concerned friend, I do still have my left hand you know and I am using a laptop and not my phone to write on. I am resting it, believe me. Holding a book doesn't put too much strain on it :) What else am I going to do if I don't pop in here every now and again to see what is going on :) The fish started jumping in our creek yesterday. Now THAT is extremely frustrating. I am a very keen fisherman and was just itching for them to come back so that I could get out there. Now I sit here with a damaged paw and can only look on while they mock me. So, sir, I am going to be recalcitrant on this one I am afraid.

Mark

 

On the table:   Lynx, Baltimore Clipper Schooner - MANTUA - 1:62

 

Awaiting shipyard clearance: HMS Endurance - OcCre - 1:70

 

Wishlist: 1939 Chris Craft Runabout - Garrett Wade - 1:8

 

FinishedEndeavour 1934 - J Class Racing Yacht - 1:80

 

 

Dogs do speak, but only to those who know how to listen

Posted (edited)
6 hours ago, Dr PR said:

So give your hand some rest and it will recover.

 

And then get back to the Lynx! We all would like to see it finished!

 

Phil,

 

We rigged up a splint similar to what you described, it certainly helps. Without it there is always the danger of inadvertently going to grab something and that would be quite painful. As @Coyote_6 said, time for some research methinks. I want to read up on the rigging for the masts and yards to make sure I get that all right when the time comes. You enjoy your G and T, sir, and I will stick to my single malt.

Edited by SaltyScot
Content added

Mark

 

On the table:   Lynx, Baltimore Clipper Schooner - MANTUA - 1:62

 

Awaiting shipyard clearance: HMS Endurance - OcCre - 1:70

 

Wishlist: 1939 Chris Craft Runabout - Garrett Wade - 1:8

 

FinishedEndeavour 1934 - J Class Racing Yacht - 1:80

 

 

Dogs do speak, but only to those who know how to listen

Posted (edited)

@Dr PR  Somehow when I read "I bent some sheet brass to make a frame for a splint and wrapped it in gauze. I taped it to the finger" it said "I bent some sheet brass to make a frame for a splint, wrapped 'er in sail cloth and lashed 'er fast to the next yard..."

 

Don't know why that happened.

 

(Cool story for sure!)

Edited by Coyote_6

Steve

 

San Diego Ship Modelers Guild

Nautical Research Guild


Launched:    USS Theodore Roosevelt, CVN 71 (1/720, Plastic)

                       USS Missouri, BB 63 (1/535 Plastic) 

                       USS Yorktown, CV 5 (1/700, Plastic)

 

In Dry Dock:  Prince de Neufchatel, New York 1812 (1/58, Wood)

                        USS Enterprise, CVAN 65 (1/720, Plastic)

Posted
Posted
3 hours ago, Glen McGuire said:

Hey Mark!  I'm late to the party, but got here just in time to read about your injury.  You have made very nice progress so far on this build and I look forward to seeing you back in action!  Get well soon!

 

Glen, there is an old german saying; "Je später der Abend, desto schöner die Gäste"' which literally translates to "The later the evening, the more beautiful the guests". You get my drift :) Welcome aboard, sir. I am honored to have you here.

Mark

 

On the table:   Lynx, Baltimore Clipper Schooner - MANTUA - 1:62

 

Awaiting shipyard clearance: HMS Endurance - OcCre - 1:70

 

Wishlist: 1939 Chris Craft Runabout - Garrett Wade - 1:8

 

FinishedEndeavour 1934 - J Class Racing Yacht - 1:80

 

 

Dogs do speak, but only to those who know how to listen

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...