Jump to content

PETERPETER

Members
  • Posts

    30
  • Joined

  • Last visited

Posts posted by PETERPETER

  1. Excellent work as expected each time you add to your log. Nearing the end of your Kathryn build! Recall that I have a large sheet of Perspex/Plexiglass you should look at when you get around to building the display case... or might you be thinking to use glass?  I'll bring you my jib sail so you can see how I fashioned the shackles and stitched them to the sail. Use of grommets at this scale would be difficult to say the least.

    Best regards,

    Peter

  2. Very pleased to see that you have passed through the most difficult part of your recent event and good to see you back to work on Kathryn. 

    I note that you have not pencil lined the sail to represent seamed cloth panels. Possibly the sail was not made up from seamed panels??? You have also shortened the height of the sail, (with fewer hoops) so that the furled and tied appearance will be visually to scale. Your wire shrouds and stays, using Surfstrand fishing leaders add realistic detail to your Kathryn. All around superb work.

     

  3. Five star ***** rating on all of your metal work  and looking forward to the upcoming items you listed. So far you haven't mentioned the great conundrum represented by the two dredge baskets. I know that it will be another challenge which you will master. Meanwhile, this watch-bird will be watching you.

    Peter

     

    2 hours ago, Mahuna said:

    Before any new work is started, there is a lot of planning to do, including developing approaches for the following efforts:

                 Making the detail on the trailboards

                Manufacturing the blocks required for the rigging

                Making furled sails

                Working with wire rigging, including making scale turnbuckles and shackles.

    So with all of this ahead, and with some trips coming up, there may be some longer intervals between posts.  In the meantime, thanks everyone for the likes and comments, and for the continued interest in Kathryn.

     

  4. Frank,

    Your completed hull is tres elegant! I have been fortunate to see your work close up, while learning many new things about modeling.

    Looking forward to seeing Kathryn finished and hoping you may consider making a set of sails for her. It would not be that much extra work and would really bring her to life.

    Peter

     

  5. You said you would finish the frames this weekend and by golly you did. I am still wanting to understand how the frames were fastened to the keel after being slotted into the mortises. 

    Your encouragement finally has me back to work on Willie Bennett. The plans have a tremendous amount of detailed I not did recall, having last worked on her years ago. The work I did then passes my scrutiny. I finished the woodwork and iron fittings on the bowsprit today and I will be able to show some progress at our next meeting. Thanks for your help.

    Peter:cheers:

  6. You have come a long way since we first met and are now miles beyond my abilities as a model shipwright. I enjoy watching your progress on this "Mayflower", especially since our family ancestry includes, one John Howland, who was at that time an indentured servant on this famous ship.

     

    Your friend and neighbor,

    Peter Howland Florance 

    post-1257-0-35445300-1435033397.jpg

  7. G'day Gaitan,

     

    Please tell us the source of supply for your linen thread. Also kindly tell us the different sizes of thread you purchased. Possibly you have already answered my questions elsewhere in your log, however, I cannot find it. I continue to admire your work and expertise as a master model shipwright. I learn something new and valuable each time I visit your Le Fleuron Log. Thanks for your time and effort to help us improve.

     

    Peter

  8. Hi Mark,


    Zoom in on the figurehead photo dated 7/28, and concentrate on the drape of the robe over the left arm and shoulder. It looks as though you could round the corner of the sleeve, from the cuff all the way up and around the top of the shoulder. You might also do some rounding  on the robe hanging under the arm, down towards the foot. Then zoom in on the 7/28 photo showing the right arm. A bit of rounding similar to the other side might then have your Druid looking more realistic... rounder and less square. 


     


    Also. look at the hood on the bottom two photos dated 7/29. You might also shave the back of the hood a bit to make the fabric drape more vertically down to where his shoulders would be. The hood fabric would then be shaped more like the outside of the Druid's skull.


     


    A friend, a magnificent carver of birds, and now starting to work on ship models, might have some more useful observations on your Druid figurehead. I'll email him and have him take a look.


     


    Take a look at the website he recently put together, showing some of his magnificent bird carvings.


     


    http://www.wingedexpressions.com/home.html


     


    Peter


  9. Hi Mark,

     

    Your DRUID is spectacular in every way :im Not Worthy:. I especially like your figurehead... a Druid... of course... why not.

    Mine has languished these past months since our move to a new home,some 7 months back. She's stuck

    in the doldrums... :( ZZZzzz! -_-. Waiting for a breeze, anything... to inspire me to get back to work.

    Your display case is also top-of-the-line. Time to sit back and admire your work  :champagne:

     

    Peter

  10. G'day Mark,

     

    Though I have not had anything to say for a long time, I have been lurking in the shadows watching your log, admiring your progress and the excellence of your work. We recently moved to a newer and smaller home where I have taken over the guest bedroom and arranged my workspace in order to finish my DRUID. I will now have your photos and comments to help me along the way. Great work!

     

    Peter 

  11. A good place to find taps is Victor Machinery Exchange. A 4-40 left hand HSS hand tap costs $4.90. The 4-40 right hand tap  is $3.95.

     

    http://www.victornet.com/index.html

     

    Threaded brass rod in 3ft lengths can be found at MSC Industrial supply. Size 4-40 price is $3.59 each:

     

    http://www.mscdirect.com/

  12. Here is a "Google Translate" Italian>English translation of Lino's last message. The translation is less than perfect, and my understanding of the first few translation words is shown in brackets. But it's good enough to be understood. I have suggested to Lino that he post his Italian>English translations at MSW .

     

    Hi,
     
    [i wish to be included] in this discussion because I too have broken the rules of the forum, but without knowing it. However, I apologize. As the topic is interesting, it would be a shame to exclude those who do not know English or understands little. I really hope in the common sense of the moderators that this does not happen, and will respect whatever your decision, thanks and best regards.
     
    Lino
×
×
  • Create New...