Slowhand

Does anyone else do this? You look at your model and debate what you are going to do , yet all the time you know what you are going to do. In my case I am going to replank the decks with maple 1 x 4mm . The existing ones are too wide and are irritating me. 5mm X 90 would equal nearly 0.5 m wide on the real ship. Colour of deck too yellow caused by using Danish oil on the wood.

Does anyone use a mini mitre block useful for edges of deck hatchet and edging of gun ports? Never find doing it by eye gives a good finish.

Thanks for the kind words. The Domanoff parts look well worth having.

One thing about this website is it really makes you raise your game. Finally finished the first layer of planking on the San Martin. 31 planks each side, reasonably happy with it, will need some sanding and filling. Despite tapering the planks are still crowded up at the bows. Advice requested? Should I go with the 0.6mm thick Sapelli second planking supplied or should I buy in some 1mm thick timber. My last 2 Corel models used the thicker timber and it should be more fore-giving if an extra expense. Also do I follow the Occre instructions? Going to take my time and listen to advice as the Admiral and me are relocating to another port near by.

Perhaps it's the thickness of the strips , found 0.6mm sapelli warps a bit when PVA is used to glue it in place.

It all looks so simple, clean cuts and sharp woodwork, sign of a true craftsman

Thanks to all for the advice. I waited until the Admiral was out of port for a day and got going with the Babyliss heated hair tongs to help bending the 2 x 5mm strips. Quite pleased with the result. Must get my own set.

Thanks Mark, I'll give it a go. Will have to wait until the Admiral is out before using the heated hair tongs.

Just coming to the final planking of the San Martin (first layer). Advice much welcomed. I've planked the upper hull, which I'am happy with but I want to plank the lower hull realistically to practice for the second layer. From my understanding the garboard plank will need to bend through 90 degrees from lying on the bulkheads to resting against the false keel. The timber supplied is 2x 5mm and appears too thick to bend after a day's soaking. The Occre instructions skim over the planking and all the first planking is of the same size and the instructions would not result in a realistically planked hull with tapered planks. Not sure how to approach this. You can see my build log on the forum. The ships going to be a bit of a bruiser.

A quick up date to my build log. Slight bashing going on to put cut out gun ports in the hull and add stub cannons into the ports, took the idea from the Corel Half Moon. Compared to some of the hulls built on here with bluff bows, this is easy. . Original has metal gun doors to stick onto the hull. Think the stub cannons will be too large, Doh!

Interesting your comments about the brittle nature of the mahogany strips. I' am doing an Occre model San Martin which has the same material. My previous models always were Corel and had thicker wood for the second planking so might buy some similar stuff in when I get to that stage. current model San Martin Occre

Your stairs could be signatures of your builds, never seen them before , but really cool

Been a while since my last post as I've had a few hiccups The last 1 cm of the false port bulwark came adrift just after I'd attached the starboard so I decided to redo end gluing of both as it would be a pain if they came apart later on. Decided to attach the two lower ply bulkheads first to give additional purchases for the upper two which had caused the problems. Later Join Together the upper two and quite pleased with results. Found the ply bits needed quite a bit of shaping to get them to fit. I like the Occre way of working doing the structural stuff and the fine decorative planking together rather than the structural stuff all together. Now doing the 1st planking layer, one of my favourite tasks, both easy and satisfying to see the hull grow. Doing the upper sides first to give strength to the ply bits. Spot the song title in the post

Hi Augustus Never thought of using bread and butter for making a model of a historic sailing ship. It looks to be a fantastic build, where did you get the plans for the San Martin from and what wood are you using for the bread of the hull?. Will follow your progress with interest. Steve

Decided to plank the bulkheads instead of staining them as the instructions said. Stained underside of decks. Glad I did it although waited for extra wood. 2nd photo taken before using Amati plank bender on next bulkhead, left hand end.to get it to fit. Dunno why photo came out upside down Other bulkheads nearly ready to fit - must remember to shave frames before fitting. Taking my time.

Hi Etcher All build logs of Occre models I've seen, do planking of decks before fitting. It worked okay for me. Not come across on it on Corel models I've done. Steve

Well here goes, my first build log. The San Martin was the flagship of the King Phillip II 's commander the Duke of Medina Sidonia and is frequently mentioned in "The Defeat of the Spanish Armada" by Garrett Mattingly. It survived the battles and voyage and finally reached Santander after sailing around the north of Scotland and Ireland. An earlier incomplete build log of this model , with several photographs of the parts in box is shown in San Martin by Volkerbo - Occre - scale 1: 90 so I won't repeat. This is my first Occre kit and so far compares favourably with Corel efforts quality wise. The frames and false keel went together easily with only a little easing and first picture shows three of the decks planked, although only the main deck is glued in place which needed clamping it was straight whilst it lies curved. The planks were lightly sanded and given one coat of Danish oil and tree nails added in pencil. For this build I intend to sand, coat with one coat of Danish oil and rub in beeswax at the end. Noted a few oddities in the instructions already, one of which suggests bulkheads planked vertically with mahogany. Never seen this before so will plank horizontally as in many build logs. Also suggested this planking is done before the decks are added which I think would have needed trimming the planked decks. So will fit the decks and then plank the bulk heads. The only bashing I intend to do is to cut out more gun ports to replace the metal stick on castings. Will try the method used in Half Moon using stub cannons glued into a block fixed to the bulkheads. Aim is for the cannon barrels to protrude from dark shadowy gun ports. If I can't get the planking right around the ports or the effect doesn't look good can always debash the kit. Now for the fun, I have a decent camera but struggling to get a good lighting and spot in the house. All comments welcome and I hope its of interest to the members, signing off for now. Steve