HardeeHarHar

Someone needs to tell me how to put page breaks in a log..... I have been very busy at work things, and not ship build things, but I haven't been completely idle in the background. I made a quick jig and rigged a cannon to see how that works out prior to building the foredeck over the two cannons up front. I tried a couple of coiling techniques that failed miserably, and I also made one big simple coil that seemed to look acceptable. I believe I will scale down the rope coils in size a little more, but keep it as a couple of simple loops in length. I also have now glued, and re-glued the stern fascia and the stern counter in place, and have begun to plank the stern counter (pictures to follow shortly).

Pulling up a chair. Fascinating model, beautiful craftsmanship, and amazing build log Captain H. I'm building the Granado (Caldercraft) now, but looking at Tom's Granado over my shoulder..... Keep up the great work, I am eager to hear how this tapering issue resolves in the end. Cheers, Brian

Hey Bob, Just wondering how/where you elected to stow the canopies you have removed to allow the mortar to be seen? I have been wondering what "solutions" have been used? Best regards, and smooth sailing with Speedy! Brian

So, dead calm seas have allowed little forward progress in NC (actually just really busy at work). I have discovered my kit is missing one of the brass etched sheets (0.9mm), so I have written to the manufacturer to see what my options are (wish me luck there). I have finished all of the cannons now, to the point where I am getting ready to tie in the two in front before I cover them up with the forecastle deck. Luckily I have some good references for rigging the gun tackle, and will do as much as possible off the boat with a rig.

Hey Bob, thanks again for the help. Glad to hear you waited all that time to put the spanshackle down, as I was thinking it would just get destroyed if I put it in place where suggested in the instructions. Look at me growing wiser with experience! Glad to hear you poly'd over, you just do it so well it looks great. And yep, I understand the mortar comment, just wanted to hear whether you actually GLUED them down. Sounds like you just let them sit within the housing, which is tight space for the larger mortar, for sure! I may see if I can use some of that bluestick adhesive putty to hold removable components in place with a little more permanence than gravity alone, as I have found it helpful in holding quoins in cannons in place on a semi-temporary basis until I have them all tied down. That stuff was also helpful in building the gun carriages too... Best regards Bob, Brian

I just noticed you didn't bend your fish davit span shackle down to lie flush with the deck. I am amazed they haven't taken a beating, as I have been hesitant to put them in place after bending them as instructed.... Also, did you use any polyurethane or oil on the deck, the mortar housing, etc? Did you use poly or oil or anything on top of the red ochre bullwark, or is that not recommended in your experience/opinion? Finally, and I have said it more than once, your build is beautiful and inspirational. I have much to learn, as I have just finished the main hatch and the deck reinforcement, and am going to rig the cannons in place before adding the forecastle deck. So far, so good (literally). Oops, one last question, did you glue your mortar base and mortars into the mortar housings at fixed angles and positions, or leave them free to rotate or slide around, etc. I hope that last question makes sense...

Nicely done, and welcome on-board. I think you did great work in a remarkably short time period! I move at glacial speeds comparatively speaking it appears.....=(. Keep up the good work, and I'll be eager to see your builds in the future!

You made that look too easy, and the result is b e a u t i f u l! Thanks for the inspiration. I will be following your lead soon I hope, and likely will build two at one time, to see if I can actually research and figure out how to make one a decanter for holding a good port wine......

Honest comments RMC, your work is great, and thanks for your blog work too. I am seriously thinking of making a port decanter out of the secret vessel Morel by Master Korabel as something "different", 😃 it seems doable. However, post Granado thoughts are a long way off for me (just placed the spirketting on the inner bullwarks).

Such a great way to do it. You are awesome! I really appreciate the depth of information you are able to convey in your build log. Also, the more time I spend in the forum, the more I hear Chris Watton's name being used in positive ways. I'd love to do the special edition of The Speedy too.....after I finish the Granado (ahhhhh, one day) and make a port wine decanter out of the Morel by Master Korabel 😉

So, I managed to finish the hull with some Danish Oil without creating too much of a mess of things. The Castello Boxwood makes it look so clean. The picture is over-exposed and I haven't polished the finish at all, but it still looks much better than it did without the oil.I also attached the keel piece at the stern, masked off all the gun/sweep ports with tamiya tape, and painted the inner bulwark red ochre (without inadvertently painting the maple decking). I am now getting ready to add the spirketing and the sheer rail, finish the hatches, etc. and figure out how to tie the cannon's down in the forward gunports before building the foredeck over them. Wow. So much done, so much to go!

Great documentation...and good questions. I’m glad I’m not there yet I think!! 😉

I wonder if you could make it hold a good port, like a decanter.

I think this looks like fun too.

Hey Bud, North Carolina newbie calling in return to say welcome to the group...You will fit right in, and if you stay a while, I hope you too will find it a rewarding and encouraging environment. Lot's of talent out there willing to share information, opinions and advice. Share your work and experience if you can by doing a build log and we can follow along from afar. Cheers (and get out your vote), Brian

I'm going to keep posting even the slightest progress, because it is at least progress. I have to say I have been getting tremendous advice from Tomasz and others, and the work of everyone is documented so well in some cases it is clearly a work of art. I can't wait to hit the boxwood and Maple plank/decking with oil, but I have been filling gaps and straightening ports and lights. I keep sanding the frames on the inner side of the bulwarks, and removing some of the previously applied stain to prepare for the red orchre paint onslaught as soon as the Tamiya tape gets here. While going out of my mind, I made a grating cover with walnut coamings for the deck. I also thought I would share a picture of these cool doors I scored in Durham, NC from James Kennedy's Gallery (which has unfortunately closed). He had some amazing stuff. If I am remembering correctly, they are 2 x 14'....19th century?

Hang in there CC! Just wondering (not wanting to continue the painful memory) if the stitches with the provided kit, or your purchased material, broke more or less. I have no idea why that seems so important when the more important point is that you are doing a great job, and have done well considering having only two hands (and two feet, just saying....). 😃 Good luck soon to be paddler.....

I'm in all the way too! I just happen to be in the process of building Caldercraft's Granado kit with Boxwood, and would just love to have this be my next build if not outside of my capability. Totally stoked!!! Great work, and please keep up the fascinating updates!!!! Where do we send money 😉 Cheers!

I finally received our first John Noble for our place on Roanoke Island, NC. I should note that the picture below isn't it, because I took it to the framers before I took a picture of it. Doh. I got it as an anniversary gift for the Admiral, it is a lithograph of a man in the rigging entitled "Dying in the English Kill", with a unique perspective: My Granado is going slowly but surely, in ebbs and flows, as I attempt to try to understand all the options and approaches available and navigate appropriately. I completed lining (and even un-lining, and relining) the gunports without lids. I had inadvertently lined the chase ports and planked them as done with the gunports. Not too bad of a no-brainer, as I could just file it back (un-lining) and reline as it was supposed to be, absent of the boxwood planking this time. I also sanded the wale and false keel back down, and am preparing to cover most of the plank, wale and deck with Minwax Tung Oil or Watco Danish Oil. I am still resisting painting the wale black and am leaning towards leaving it and all the boxwood planking just oiled, not painted. You can tell the inner bulwark still needs some sanding prior to painting red ochre, which I am currently planning on doing, as I like the look of the blood red gun ports (was that the intention?). If the wale and false keel and hull below the waterline don't look great plain, then I will get the paints out and buy an Iwata Neo (which I am likely to do anyway..., because even little boats cost lots of money to build apparently!!!) I have wood conditioner I intend to use to help the Tung or Danish oil, and I may use a dark stain on the wale/and false keel before I tung oil it (as I had done earlier (see earlier photos), but a little to heavy handedly). Opinions and suggestions still being accepted and encouraged! 😉 My ship modeling colleague Tomasz suggested I might want to use some dilute glue and wood dust to pack the cracks before oiling, which I appreciated even if I also semi-dread undertaking as there are a LOT of cracks 😉 to fill and sand.

Hi Bob, Thanks again for sharing your knowledge as time permits!! Take care and stay safe. Brian

I'm stunned at what I am looking at. Building the Granado right now, and this just is an awesome visualization to be able to refer to. THANK YOU!!!

Hey Bob, I believe you substituted rigging ropes and fittings extensively in your Granado. It looks soooooooo good, but I also know it led to some issues and rework. I am a long way from starting the rigging on my Granado, but I was wondering if you have reached a final opinion of the value and benefit, and whether you were willing to recommend those substitutions specifically to a newbie like me? Best regards, Brian

So, those sweep ports were intimidating for me to start, but I think they are looking pretty good so far. They are all pretty close to the desired dimensions from the outside; but the inside dimensions still need work due to limited access. I purchased some Tung Oil and some boiled linseed oil to test, is boiled Linseed considered "Danish Oil"?

Joe, your build is one of the gold standards. The quality of your work and of the others is just beautiful, and the Granado is a nice kit in my humble opinion. I found a high resolution image of Clevely's Launch of a 4th Class, that show's the Granado being pulled to Harwich for final rigging. It put's a lot of perspective on the size, as it shows people on deck. The image is captured in high resolution. And, thanks for the kind words and encouragement. I am hoping to keep a good pace to ensure completion without sacrificing quality. As I recall, you painted your beautiful boxwood hull.... While I am thinking Tung oil/Poly, I have a bottle of Admiralty white lurking as well....

I have mentioned this before in the log, but I need to emphasize that I have no real experience with acrylic paints. For that reason, I am considering not painting the hull to show the boxwood planking (and perhaps really faint treenails). Still soliciting opinions on this decision, and have gotten some good advice on treenailing from several (thank you D.). However, I think I should use the Red Ochre Admiralty paint on the spirketting and inner bullwark as suggested. I put two coats of grey primer on the walnut spirketting strips, lightly, with a spray can. Whether I needed to do this or not, I have no idea, but I thought better safe than sorry. Then three coats of the Admiralty red. It looks like it could use a couple more coats, but should I sand in between with fine 320? Or, just make sure it has good coverage, and give it a final coat or three of poly? What do people think about the Admiralty colors in this build, and are there any alternatives that should be considered? The sweep ports are pretty rough but I can/and will try to clean them up more over time. Sill have more to do on the starboard side, but the port side is complete.