-
Posts
1,185 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by shipman
-
No one should be inhibited from building their model of choice to their own satisfaction and abilities. Very few have the resources to build into their model complete historical accuracy. It is their hobby too. I agree it is laudible to do the best you can, but don't spoil another's pleasure in their past-time. Who knows, their next project may be very different. Encouragement is what is needed.
-
Just a thought on this topic, guys. Donald McNarry used to swear by Seccotine glue all his modelling life. It's a water soluble refined fish glue and has a good shelf life and still available.
-
Dowmer hi. I just had an amusing thought. Could that Spanish Brown be .... ALE? Here in England 'Brown Ale' has always been popular. That would account for the relatively high price? Back to bulwarks; there are many Royal Navy accounts of weekly scrubbing of decks and bulwarks with water then 'vinegar', then whitewashing the 'walls'. Being cluttered, dark and dingy places, anything to brighten below decks must have been welcome.
-
Working Comfortably on Upper Rigging
shipman replied to capnharv2's topic in Masting, rigging and sails
Yep, you got it wefalk. If you notice, the arm rests are mounted on stainless steel studding. The height is quickly adjustable by spinning the wing-nuts to any level you need. The studding in the photo's is short for work on the hull. When it's time for rigging these are replaced by 1 meter lengths, which can then be adjusted up and down to where you need support. They can also be mounted wider if need be. Once the rigging progresses the THING can be lowered on it's legs. The slots underneath are modified so the table can be lowered almost to floor level. Hence the whole reason for the THING; IT'S FOR WORKING COMFORTABLY ON UPPER RIGGING! Yes, my other ironing board is made of 1 inch steel tubing as you described. Never seen another.....but they are out there! -
Working Comfortably on Upper Rigging
shipman replied to capnharv2's topic in Masting, rigging and sails
mtaylor, thanks for that. My actual proper dedicated ironing board is even more substantial but lacks the pierced top which makes the THING so adaptable. Interestingly, both came my way from local dumps. No one wants to pay for a good quality board, like many other things. Yet as we all know, the proper tool for a job makes that job so much easier. Take good care of you and yours. -
Working Comfortably on Upper Rigging
shipman replied to capnharv2's topic in Masting, rigging and sails
mtaylor, hi. I agree, there is some movement, but the little there is quite 'stiff' and minimal. Using the arm rests keeps your hands steady with no relative movement at all. Being steel, the THING is quite heavy. I've just tried to overturn it; it would require a deliberate and strong effort to do that. I'm 100% confident it isn't going to fall over! It's intended as an assembly platform. Any cutting of materials where force is required would of course be done at a regular work table/surface. However, the THING is intended to be used for on-going and final assembly, including masting and rigging, where any work involved is rather light. For what it is and the intended use, I'm confident this THING is more than adequate for my needs. My intention, by sharing, is to show what can be done for virtually nothing. And when the project is complete, the thing is quickly reverted back to original ironing board and folds away for storage. -
Working Comfortably on Upper Rigging
shipman replied to capnharv2's topic in Masting, rigging and sails
DelF, thanks. 63 years old and still single. I wonder why? Still, within reason I can do whatever I want. No ear-ache or blackmail. there's a lot to be thankful for. You make your bed...........and it's all yours! As I said, the THING cost me nothing. Except for the fasteners all the rest came from my local dump. Don't go tying yourself up, in Notts. -
Working Comfortably on Upper Rigging
shipman replied to capnharv2's topic in Masting, rigging and sails
Hi, just came across this thread just as I've thrown this THING together; and it cost nothing! Working on the KISS (keep it simple, stupid) principle, I now have a work station which gives all round access, variable height, built in tool storage with infinite possibilities for hanging/stretching cordage etc. and is stable. Notice the hand/arm rests which can be height adjusted for any aspect of hull and rigging work. You can stand or sit and it's easily movable and should keep most things together within arm's reach. All applause welcome. -
Hi. Dafi kindly pm'd me and we sorted things out. His VAST sheet containing gazillions of hooks and eye-bolts arrived. What amazing value they are compared to other sources. Glad we eventually got things sorted Dafi. A true gentleman.
-
Popeye, I'm going for the photo etch instead of using the decals because the ships decorations are raised carvings. The photo etch is a bit more realistic and a no brainer for the price.
-
Hi Peter Y. to be honest, this originally began as questions/answers to posts in the build logs. If the moderator wishes to re-locate this thread elsewhere, I have no objection. That would be like moving from Humberside to East Yorkshire. The same but different. My best wishes to you.
-
'puckotred, thanks for that, both suppliers look good, though the rope site seems a little mysterious to navigate. Again, thanks to everyone's responses to my questions.
-
Thanks guys, for your help finding the CS stuff I was looking for. Anyone any feedback on their 'rope', blocks and deadeys?
-
Thanks popeye, I found the new site. Just started browsing through it but have only found sails and flags. It's 00.40 here so I'm off to the Land of Nod, but will continue tomorrow. My best wishes to all responders. I'll let you know how I get on.
-
dlock3155, thanks for that, it sounds just what I'm looking for. Unfortunately the address you give doesn't work as a hotlink, or a direct e-mail and nothing when I google it. I'd like to get there, but can't.
-
Does anyone produce a photo etch fret for the Revell 1:96 Cutty Sark kit? Specifically the bow and stern decoration. Chicken coops etc would be nice. I'm also trying to find deadeyes smaller than 3mm. I can find 3 and 4mm. If anyone is interested; I've just acquired some sublime scale stanchions (two and single ball), plus stainless rail to suit and some incredibly small blackened chain (42 links per inch!). All from Keith at mteam@modellingtimbers.co.uk. He does a bunch of nice stuff, check him out.
-
I've just got hold of the H-393 (1978) version of this kit, awaiting delivery. In anticipation, I'd appreciate guidance on the various scale chain needed to complete that aspect of the rigging, ie. links per inch. Some odd soul out there must have worked out what would be required, including an estimate of overall lengths needed. Can you help please?
- 20 replies
-
- cutty sark
- revell
-
(and 2 more)
Tagged with:
-
Congratulations on this bold take on an old favourite. Just found it on the 'new' quick' index. Just love your weathering, it's a shame there aren't more models looking like this; I would imagine most ships would look like this after a long voyage. Would be great to look at a good ship weathering tutorial.
- 44 replies
-
- cutty sark
- revell
-
(and 1 more)
Tagged with:
-
Yep, no place to be fighting a war. Not far from there is my grandfather; he went down with HMS Courageous after two torpedoes from a U-boat, 17 September 1939. My mother was born while he was away. he left a wife and five kids. One way or another the family still feels the pain. King and country.......and all that. Odd thing is; my mother died on 17 September. Strange old world innit?
-
Jolly Roger you appear to be quite correct about the 'Fairport'. Just found this little snippet describing another sailing ship observed during that battle:- ''Another unidentified sailing vessel was spotted the same day not far from Fairport's course line by George Hanks, a sick bay attendant on HMS Carnarvon. In his diary, Hanks recorded, "About 3 p.m. a big sailing ship appears on the horizon and no doubt but what those on board her had a magnificent view of the battle just as it was at its zenith."
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.