Jump to content
New Publication - Ship Modeler's Handbook - This Opportunity Will Soon Be Over - Order Now!! ×

Old Collingwood

Members
 View Profile  See their activity

  • Posts

    11,973

  • Joined

  • Last visited

 Content Type 

Everything posted by Old Collingwood

  1. Old Collingwood
    Thank you so much Kevin, I still have my Corel Greyhound and Peregrine - both wood kits - both roughly 1/90-1/100scale builds. This other one Kevin - OC.
  2. Old Collingwood
    Still looking Superb Kevin. OC.
  3. Old Collingwood
    Thank you wallace - we managed to get something sorted. OC.
  4. Old Collingwood
    Thank you sincerely mark, yep im quite enjoying the rigging as its not just a visual thing but starts to be more hands on with the different ropes and what they do. OC.
  5. Old Collingwood
    So - with my build - I will have to continue the shrouds for the foremast - before I get around to doing that would it make sense to tension the mast by running a temporary thread down to the last deadeye (that does not have a shroud attached) my thinking is it will keep a even tension for all the shrouds sharing the same channel. OC.
  6. Old Collingwood
    We wont freeze - the temp has warmed up slightly, we also have a wheel around calor gas heater that we keep for emergencies. OC.
  7. Old Collingwood
    Looking smart. OC.
  8. Old Collingwood
    I have been really enjoying the rigging the last few days - its been more pleasurable than I thought it would be, but folks you will have to miss me from tonight till next tuesday as our electric (pre payement meters) is due to run out tomorrow and my laptop needs to be plugged in due to a defective battery so we will have to sit in the dark with our candles, no tely for the admiral either (she aint happy) so dont worry folks like Terminator says - "I will be Back" Roll on tuesday. OC.
  9. Old Collingwood
    Thanks lou. OC.
  10. Old Collingwood
    Thanks mate. OC.
  11. Old Collingwood
    All the very best on your new builds bob. OC.
  12. Old Collingwood
    Hi all, some good progress today - I made and fitted the mainmast lift rope, this was tied and glued to the side handrail with a loop hangng down, same as before I then ran the other ends of the rope up and through the blocks, and looped and taped to be connected later. I then turned my attention to the two stays - first I added some thin rope around the block ends, then I tensioned the stay - added a few drops of glue then lashed the ends with thin rope - after I ran a bit more glue and trimmed the ends, so fore and mainmast stays now fitted and tensioned. OC.
  13. Old Collingwood
    She is looking excellent and that centerline join even dry fitted looks bang on. OC.
  14. Old Collingwood
    Thanks denis - thats a good idea. OC.
  15. Old Collingwood
    Its the Excellent Revell kit craig - its very nicely molded. OC.
  16. Old Collingwood
    Thank you wallace. OC.
  17. Old Collingwood
    Not a magician just feeling my way learning as I go along mate. OC.
  18. Old Collingwood
    Welcome aboard sorry to hear about your arm - hope all is good now, you have a great site here full of knowledge and helpful people - looking forward to seeing your progress. OC.
  19. Old Collingwood
    I use Revell Styrene poly cement. OC.
  20. Old Collingwood
    Then I cut the mainstay rope from the rig and placed it around the mast - I then tied and glued the loop and let it set, I then turned my attention to the bowsprit and looped and lashed some rope around it, I then worked on two double blocks still attached to the sprue (I thought it would help working on it still on the sprue) I used some fine thread and fed it through both ends of the blocks then tied a knot in the middle - I then moved the knot along and hid it inside the block holes - this was repeated for the other sides of the block, a dab of ca secured the threads, this assembly was then cut away from the sprue and painted, I then attachetd the double block to the mainstay/bowspit end and tied/glued the end - this was left with mainmast mainstay end dry fitted to the block - hope that makes sense. OC.
  21. Old Collingwood
    Good day all, more work on spaghetti city (ropes) first I assembled the mainmast mid section, and after painting and weathering I attached the lift rope blocks, then I glued the mast into place and made sure it was square with the foremast, then it was time to work on my rope making rig to serve the end section of the rope - so this was the status as that stage -
  22. Old Collingwood
    Can you adjust the intensity of the flash perhaps by half? OC.
  23. Old Collingwood
    This was taken from our old front window. OC.
  24. Old Collingwood
    Yep, I have seen 326 about 10 times at different airshows she always used to display that flag, still quite a sight even allowing for more exotic types, I used to have pics from my old film slr days but alas all my old film folders were destroyed years back along with all my spotting logs and folders. OC.
  25. Old Collingwood
    Curtosy of the net LS-326 - OC.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...