Jump to content
New Publication - Ship Modeler's Handbook - Temp out of stock ×

alde

NRG Member
 View Profile  See their activity

  • Posts

    1,012

  • Joined

  • Last visited

 Content Type 

Everything posted by alde

  1. alde
    Looking really nice Tony.
  2. alde
    Pete, When are we going to see more? I have been rubber cementing frame patterns to wood and hope to start cutting them out tomorrow. I will update my log soon. I am really excited about this project and hope I don't neglect my schooner too much. A question though. How much meat should I leave on the frame parts for fairing? I am working at 1/48th scale. I don't want to leave too much to sand but want enough to fair them well.
  3. alde
    Mike, I see a brand new mill on ebay right now for $660. That's only $260 more than the attachment plus it has its own motor assembly. You would have to buy th DRO and other stuff separately anyway. The mill takes up 12" x 15" of shelf space and is 19" tall.
  4. alde
    Mike, I'm with the others on this one. I would get the separate tool if space is the main concern. The mill attachment will take up almost as much space as the mill. I have both and they are fantastic tools. As far as cost goes the attachment is almost $400. How much more is the whole mill? They would both be ready to go when you need them without converting them and worried about alignment and set-up every time.
  5. alde
    Bob, You must be retired and have the time to dedicate to modeling. You are moving at lightning speed and still do precision work. I will have more time on my hands for modeling soon. I retire in about 5 weeks.
  6. alde
    Good luck with your Triton build. I just started mine today too. It's going to be a fun project.
  7. alde
    Thanks for looking in and the kind words. This will be a fun build and it sure makes a nice looking model from what I see from you guys and other builders. I have been studying yours and other builds and learning a lot.
  8. alde
    I feel like I am jumping in the deep end with this one but since I got the new Byrnes saw I wanted a special project to learn how to use it and my Sherline mill. I used the mill to cut the rabbit and it came out pretty good if I must say so myself. It will be slow going for a while because I am still working the schooner and don't want to set it aside completely. I will have plenty of questions and welcome any help offered.
  9. alde
    Mick, One thing that I love about this forum is the support offered and the fact that nobody is judgmental and when mistakes are pointed out it is done in a very constructive way. My experience is that it is like that to a person, from the new modelers to the most experienced artists. I have never been given so may words of encouragement and assistance as I have on this forum. People take time away from the little time they have to pursue the hobby to help others. That really is a special thing that this forum offers. It's very much appreciated.
  10. alde
    Mick, you are far and above me in skill and work quality. I am getting closer to being able to take on a project like yours but small steps for me. I am taking your suggestion and starting the Triton Cross Section. It will be very slow going though because I still have the schooner to finish.
  11. alde
    Jim, Thank you for taking the time to answer my question personally. I only have the one slitting blade I ordered with the saw and will be ordering a couple more. Can you make any recommendations? Again, the saw is fantastic. If anybody is on the fence about getting one of these tools just know you are getting super quality and great customer service. Al
  12. alde
    Very nice Mick. She looks great.
  13. alde
    Mark, I'm using the 24 tooth carbide blade that came with the saw. I bought a couple of different blades with the saw. I also got a 90 tooth slitting blade. Should I try that one?
  14. alde
    I got my new saw this morning and it's a thing of beauty. Now I have to learn to use it. I tried to cut the keel sections for the Triton Cross Section project out of boxwood but I'm having problems. The cuts are uneven and pretty rough. I can't seem to get a nice straight cut. I did a little better with cherry. When I cut boxwood with my little Microlux saw the cuts are as smooth as glass and even. What am I doing wrong?
  15. alde
    Tom, Thanks for the inspiration. I really feel like my skills are improving and getting more confident. The Glad Tidings has taught me quite a bit so far but the most important thing is patience. It seems like it's taken so long to get to the point I'm at. In the past it would have bothered me but now I'm fine with it. It's become fun to solve problems and re-do things until they are right. I don't know if Constitution will be my next build but I will build her. Al
  16. alde
    Tom, I have really been enjoying your build and learning a lot. I am considering this kit once I finish my Glad Tidings. I am still pretty new to the hobby and not sure I can handle it and want to do the ship justice. How are the instructions? Would I be taking on too big a project for a beginner? I do see other people taking it on early in their building and see mixed results. Some look great and others just fall off the grid and probably never get finished. Thanks, Al
  17. alde
    She sure looks nice Eric.
  18. alde
    I just ordered one of Jim's saws a couple of weeks ago and it will be at my house on Monday. I can't wait to be able to mill my own stock. I ordered everything but the tilting table. Also got some spare blades, an extra belt and a zero clearance insert. Did I need it? No, but for a lifetime hobby it's a good investment for me. I hope to order the thickness sander in a few weeks.
  19. alde
    Nice going Matt, she looks great.
  20. alde
    Thanks Hamilton. I was going to try to sand out the imperfections and not use filler but I'm afraid the planks might get too thin in places. I hope to get to the point of painting by the end of the week. I at least want to get some primer on it so the problems will show through better. I was thinking of going with Yellow Ochre for the hull color but might go with something a bit brighter. I don't want it too bright though.
  21. alde
    Tim, I can't thank you enough for posting these links. I know so little about my fathers war service but have a great interest in learning. I do apologize for taking your Build Log on a tangent though. I am looking forward to seeing your Liberty Ship come together.
  22. alde
    Tim, OK, here is a list of the ships my father served on with date and place of discharge from the ship. He joined July 27, 1942 which was one month after his 16th birthday. I'm not sure this list is complete but he did spend several months in London after his ship was damaged on a trip. 1. S.S. Sahale out of New York August 24, 1942 and returned to Boston Oct 21, 1942. I believe this ship was a Hog Islander built in 1918. He was aboard during this Convoy PQ 18 as shown on this link: https://en.wikipedia.org/wiki/Convoy_PQ_18 2. S.S. George F. Patton out of Portland Main June 1, 1943 and return New York Aug 9, 1943. I think this is a Liberty Ship 3. S.S. Casimir Pulaski out of Boston March 16, 1944 and return New York Sept 20, 1944. I think another Liberty Ship 4. S.S. George F. Patton out of Boston Nov 24, 1944 and return New York Jan 25, 1945 5. S.S. Marine Devil out of Boston Aug 15, 1945 and return Newport News, VA Oct 9, 1945. I think this one was a troop transport. If you would like scans of any of the papers for your research just let me know. I am happy to share any info that I have. Al
  23. alde
    Tim, I will take some time and put together the names of the ships and what little I know about them. Research and learning the history is half the fun of this hobby.
  24. alde
    Tim, I have not taken much time to look but it seems like photos of specific Liberties or other wartime merchant ships are rare. I have not been able to find pictures of any of the 5 or 6 different ships my father sailed on. I know from his papers that he sailed from several east coast ports but the only way I know where they went is from him telling me. I guess the destination was secret. He did go to Murmansk but the Russians would not let them go ashore.
  25. alde
    Count me in. My father served aboard merchant ships including 2 different Liberty Ships during WW II. His ship took on wounded at Normandy. I still have all his shipping papers and plan to do some research on his ships.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...