Jparsley Posted August 19, 2015 Author #91 Posted August 19, 2015 Ok Let's see I decided to go with the pseudo tree nailing look on my upper decks Used a very sharp pencil to make little indented marks Think she looks a little better this way She's not perfect but learning as I go Bobstrake, src, Dimitris71 and 3 others 6 Quote USF Constellation 1/85 AL Jparsley
Bobstrake Posted August 19, 2015 #92 Posted August 19, 2015 Much improved. Quote Bob "Even while the storm raged at it's worst, my ship was wholesome and noble." - Captain Joshua Slocum Current Builds: L'Hermione 1780 - 1:89 - Artesania Latina http://modelshipworld.com/index.php/topic/10261-hermione-la-fayette-1780-by-bobstrake-artesania-latina-scale-189/#entry305929<p> Louise - 1:26 - Constructo http://modelshipworld.com/index.php/topic/11855-louise-by-bobstrake-constructo-scale-126/?p=360370 Completed Builds: Carmen 1850 - 1:80 - Constructo - First Build http://modelshipworld.com/index.php/topic/10398-carmen-1850-by-bobstrake-constructo-scale-180/#entry31137
mtaylor Posted August 19, 2015 #93 Posted August 19, 2015 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Jparsley Posted August 20, 2015 Author #94 Posted August 20, 2015 Thanks guys for the comments slow going as of late but trying to improve on what I've built I could use all the suggestions you could give. Having some issues building the railings (top rails). The wood isn't wanting to keep shape. I've used supper hot water, bending iron and a lot of hand pressure. After getting it in shape it tends to straighten out as it dries even glued down I noticed after a few hours it has stretched the glue and lost its bend. Kind of irritating. Oh well. Guess ill just keep after it. I'm thinking my next effort will be to build the front supports off the bow. Not too sure what its called looks like a cage. if anyone has any suggestions as im building please tell. mtaylor and Canute 2 Quote USF Constellation 1/85 AL Jparsley
jbshan Posted August 20, 2015 #95 Posted August 20, 2015 Try letting the wood cool and dry while clamped in place before you try to glue it. mtaylor 1 Quote Joel Sanborn http://modelshipworld.com/index.php/topic/9953-lexington-by-jbshan-dlumberyard-164-from-the-seaways-practicum-by-clay-feldman/
mtaylor Posted August 21, 2015 #96 Posted August 21, 2015 What Joel said. Keep it bent unitl cool and dry. \ I always made a throwaway jig for these using scrap. I couldn't find photo but all it was is some flat plywood with a piece of wood cut into the shape of the curve needed. Both pieces of the cut curved were glued down the appropriate distance apart forming a slot. When dry, the piece to be bent was wetted, heated and placed into the curved slot. I hope that makes sense. Jack12477 and Canute 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Jparsley Posted August 21, 2015 Author #97 Posted August 21, 2015 Thank you guys I will definitely give that a try Did not like how it turned out Canute and mtaylor 2 Quote USF Constellation 1/85 AL Jparsley
Jparsley Posted August 25, 2015 Author #98 Posted August 25, 2015 Ok been doing a little work on the railings and the stern I know the stern is off a little I plan to go back and work on that later mtaylor, Bobstrake, UpstateNY and 4 others 7 Quote USF Constellation 1/85 AL Jparsley
Jparsley Posted August 27, 2015 Author #99 Posted August 27, 2015 Ok guys fixed that little annoying star on the left galley wall Installed the pre made windows took a little light bending to help match the curvature but they are on Also installed the what do you call them the frames on each of the gun ports on the bulwarks Tell me what y'all think augie, mtaylor, Canute and 3 others 6 Quote USF Constellation 1/85 AL Jparsley
augie Posted August 27, 2015 #100 Posted August 27, 2015 Just coming aboard. Love what you're doing, particularly the color contrasts. mtaylor 1 Quote Augie Current Build: US Frigate Confederacy - MS 1:64 Previous Builds : US Brig Syren (MS) - 2013 (see Completed Ship Gallery) Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery) Victory Cross Section (Corel) - 1988 Essex (MS) 1/8"- 1976 Cutty Sark (Revell 1:96) - 1956
mtaylor Posted August 27, 2015 #101 Posted August 27, 2015 Jeff, I'm bearing bad tidings... that gallery on the right (I attached a photo). Can you take it off and probably sand back the top to rotate it? Or maybe build out the bottom of it? It's a bit on the droopy side.. If you put on the main mast main course brace support (I think that's the right term) it won't be straight out. And I think you'll be happier with the stern view. I like the way you're coming along on this build. It's not the easiest one to do. UpstateNY, Dimitris71, augie and 1 other 4 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Jparsley Posted August 27, 2015 Author #102 Posted August 27, 2015 I see what you mean it is a little off ill see what I can do wit it Thanks mark Canute 1 Quote USF Constellation 1/85 AL Jparsley
Jparsley Posted August 27, 2015 Author #103 Posted August 27, 2015 Thanks mark Already torn off and contemplating how to build it up the top will be hard to sand down but the bottom I know I can build back up little wood little vanier and a little cursing I think I can do it lol Busy the next few days but I'll post a corrected version in a few days thanks for the extra eyes augie, Bobstrake and mtaylor 3 Quote USF Constellation 1/85 AL Jparsley
mtaylor Posted August 28, 2015 #104 Posted August 28, 2015 Cool Jeff. I was worried that at some point you'd wonder why we didn't say anything. When you're fitting it back, just sand/carve and the offer it up. Repeat until it's where you want it. I think you'll be a lot happier with it. Canute and Bobstrake 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Jparsley Posted August 29, 2015 Author #105 Posted August 29, 2015 Ok Tom after yanking that goofy cabin off and inspecting it I realized that the cabin placement wasn't the issue I had the wood planks going at the wrong angle So like any true hobbiest I pulled off the old planks and straightened them out They are drying at the moment but I will post better pictures of my stern shortly UpstateNY, Canute and mtaylor 3 Quote USF Constellation 1/85 AL Jparsley
Jparsley Posted August 29, 2015 Author #106 Posted August 29, 2015 Ok is this one better augie, Jack12477, Bobstrake and 4 others 7 Quote USF Constellation 1/85 AL Jparsley
mtaylor Posted August 29, 2015 #107 Posted August 29, 2015 :) UpstateNY 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Jparsley Posted August 29, 2015 Author #108 Posted August 29, 2015 Mark I've been up over 24 hours so I hope my lack of sleep hasn't clouded my judgement of perception Canute and mtaylor 2 Quote USF Constellation 1/85 AL Jparsley
UpstateNY Posted August 30, 2015 #109 Posted August 30, 2015 Nice fix Jeff...way to go! Cheers, Nigel. mtaylor 1 Quote Current Build Logs: H.M.S. Triton Cross Section, USF Confederacy Model Shipways Completed Log: Red Dragon Artesania Latina Gallery: Red Dragon: Artesania Latina Member: Nautical Research Guild
Jparsley Posted September 1, 2015 Author #110 Posted September 1, 2015 Ok guys did a little touch up built the microscopic holders for all the belaying pins Stanchions? Is that right? Anyways built the nice little balcony rails I think they turned out nice mtaylor, UpstateNY, Jack12477 and 3 others 6 Quote USF Constellation 1/85 AL Jparsley
Jparsley Posted September 1, 2015 Author #111 Posted September 1, 2015 i wanted to thank everyone thats like or commented on my build log its nice to know that others find interest in something that is important to all of us i think this site has some wonderful people that even though their skill levels are diffrent we all have the passion and love for this craft thank you all for your inputs criticisms and your wonderful words of encouragement Dimitris71, Jack12477, Canute and 3 others 6 Quote USF Constellation 1/85 AL Jparsley
Jparsley Posted September 4, 2015 Author #112 Posted September 4, 2015 New update guys Started working on the anchors Saw Nigel's wonderful display and techniques Instead of using the brass for the straps I used chalk board tape I decided on it because one its self adhesive the other is because it's a flat black Second part was on the brass ring I used a double strand embroidery thread I split the strands apart and dipped them in half pva glue and water solution stretched them out to dry I wrapped the brass loop with the stiffened thread I wanted to add a nice little detail of rope wrapped around the cross member in a figure eight Also started putting together my little coranades src, mtaylor, Gundorph and 5 others 8 Quote USF Constellation 1/85 AL Jparsley
mtaylor Posted September 6, 2015 #113 Posted September 6, 2015 Well done, Jeff. The pinrails look good, stanchions all nice and even.. And the puddening on the anchors is often overlooked. Canute and augie 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Jparsley Posted September 6, 2015 Author #114 Posted September 6, 2015 (edited) Thanks mark for the encouraging comments Starting to pull a lot of the little things together she's starting to take shape I know she isn't perfect but I am learning since this is my first large ship I've added but not glued the pins and glued down the deck furnishings finish the banisters tidding up things Edited September 6, 2015 by Jparsley mtaylor, Dimitris71, GuntherMT and 2 others 5 Quote USF Constellation 1/85 AL Jparsley
augie Posted September 6, 2015 #115 Posted September 6, 2015 She's really coming alive. Carry on, mate! mtaylor and Canute 2 Quote Augie Current Build: US Frigate Confederacy - MS 1:64 Previous Builds : US Brig Syren (MS) - 2013 (see Completed Ship Gallery) Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery) Victory Cross Section (Corel) - 1988 Essex (MS) 1/8"- 1976 Cutty Sark (Revell 1:96) - 1956
Jparsley Posted September 6, 2015 Author #116 Posted September 6, 2015 Thanks augie mtaylor 1 Quote USF Constellation 1/85 AL Jparsley
UpstateNY Posted September 6, 2015 #117 Posted September 6, 2015 She's really starting to come together! Always fun to see the deck start to get filled up with neat details! Great work! Cheers, Nigel. augie, Canute and mtaylor 3 Quote Current Build Logs: H.M.S. Triton Cross Section, USF Confederacy Model Shipways Completed Log: Red Dragon Artesania Latina Gallery: Red Dragon: Artesania Latina Member: Nautical Research Guild
mtaylor Posted September 6, 2015 #118 Posted September 6, 2015 Excellent progress, Jeff. Looking good. There is a learning curve, isn't there. What I've learned is that the learning curve continues... well... forever. UpstateNY, augie, Canute and 1 other 4 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Jparsley Posted September 6, 2015 Author #119 Posted September 6, 2015 Yes mark it's an infinite curve from where I sit it looks like a straight line up lol It may not be perfect but I've enjoyed this project UpstateNY, mtaylor and Canute 3 Quote USF Constellation 1/85 AL Jparsley
Jparsley Posted September 10, 2015 Author #120 Posted September 10, 2015 (edited) Ok Started working on the starboard davits and long boat Not leaving the boat white Mainly just wanted to get rid of the grey metal color built the inside out of wood to make it a little less heavy and more true to the ship I can tell you now that the emergency steering chain is proving to be a pain to attach My big old fingers don't work well with tiny chain links Oh well I've done harder things Edited September 10, 2015 by Jparsley augie, Dimitris71, mtaylor and 2 others 5 Quote USF Constellation 1/85 AL Jparsley
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.