Jump to content

Taurus by Duanelaker - Model Shipways - Scale 1:96 - Steam Towboat


Recommended Posts

Is it wrong to have three logs at once?  Another solid hull to keep me occupied while my other boats are drying, or waiting for something.  No rigging and I think this one will be fun.  Surprised there are no logs for this boat, perhaps there is a reason?  For the low sale price of $39.99 the castings are really nice and the is vastly improved I believe since the cabin is now laser cut and not a solid chunk of wood.  

 

I sanded some some of the hull and I’m hoping this will be good practice for the thin bulwarks my phantom requires.C57F2F5D-9E98-4A2B-A96A-833123963CC9.thumb.jpeg.543ec4bf92f6756581bbacef7836acb2.jpeg

Link to comment
Share on other sites

Thinned my bulwarks.  Wasn’t too bad with the Dremel I have.  I did 1/16”, couldn’t imagine doing 1/32” as the kit says would be correct scale.  E25D0551-E0F6-49A2-B063-0FCBC1F77C27.thumb.jpeg.b6ef827cb5edaf0fadcbb96a10360a9b.jpegD83BE0D7-91CE-4718-A427-8CC2DBC58CA1.thumb.jpeg.f60db4165dd99b027c47ecb2602d1c37.jpeg6E9D2B11-5332-4E65-B944-12B01170FF01.thumb.jpeg.8f338c2502ae3c63b5dd26b1baa3daf7.jpeg8DC95537-A38A-42AC-8896-19108DC26BBE.thumb.jpeg.c7dcbe58bdbd7eae8baf30e8e67315ab.jpeg

Link to comment
Share on other sites

I’m excited to watch your log; I had my eye on this kit during the various sales, but it’s not the right time for me to have multiple build logs (more power to you though! Good luck!)

Link to comment
Share on other sites

I found some wonderful pictures online of similar tugs so I’m going to try and do better with the details, however I can’t get over the cast fittings in this kit!  The plans lack dimension and detail like spacing of bulwark supports, distance off the deck the grating is, etc.  I am thinking about drilling the holes out between the grating rather then painting them black, what do you think?9AF30B82-7037-46A9-A902-3B3500BBF4C3.thumb.jpeg.dca1feb26dfc83bbe900d5e95eab4c61.jpegB616CCD6-E7EE-4A66-9422-B99B0A047C00.thumb.jpeg.a0d86d776f21e85de0aabef9ef24feb0.jpeg

Link to comment
Share on other sites

Made some head way on the bulwarks...thinned them more and started fitting the decking.  9A6A807E-B0A7-4189-A1AD-17140D6CFB68.thumb.jpeg.33d6f6f99f4dd853eebf28c8c2ceaf77.jpeg

 

I got the bow way nicer then yesterday.  I am struggling matching the cabin with the deck since it is not flat.  Wish the had a template for it.  Trying to match the prints to my best ability.0BCCA66A-E336-47B5-8C4F-0A5CE1F4F121.thumb.jpeg.870d82a6102d0df9dfac4c093b5a583c.jpeg2CC76F1A-6269-40FE-865D-1DE6DF12869A.thumb.jpeg.139f58ea48ca6cef712e71df0be3725e.jpeg8579430A-4F2E-485E-B187-5FD396FDFCDC.thumb.jpeg.83a2241960d40d6476da30704ac75637.jpegB42983D3-3847-4A74-BB39-C9A3F57DAD5C.thumb.jpeg.131bae7a48eb30e8d4c0d5dec4066cbe.jpeg

Link to comment
Share on other sites

On 9/25/2019 at 9:31 PM, Duanelaker said:

I am thinking about drilling the holes out between the grating rather then painting them black, what do you think?

Interesting idea, but would it look right with round holes instead of square paint?

Link to comment
Share on other sites

12 minutes ago, VTHokiEE said:

Interesting idea, but would it look right with round holes instead of square paint?

I would plan on trying to square these up as I think round would look incorrect.  Maybe not worth the trouble?

Link to comment
Share on other sites

I wouldn’t trust my skills enough to not break off some of the parts around the edges where tiny pieces would be left after the holes are drilled (and I assumed filed?) and squared. When it comes to models it’s worth the trouble for the end result right?

Link to comment
Share on other sites

I’ve decided to make my own decking by scribing...any ideas about the best way to highlight the seams? Also how should I get rid of the fuzz?32A47946-0D07-4096-9139-A3FC40542093.thumb.jpeg.f64fe5d576dc1f5f4d6a345227729ae1.jpeg

Link to comment
Share on other sites

I decided to do this because my decking wasn’t wide enough from the kit.

Link to comment
Share on other sites

Link to comment
Share on other sites

On 9/24/2019 at 9:00 PM, Duanelaker said:

Is it wrong to have three logs at once?  

I’d say not wrong, but I’m not in charge. Do as many as you can! Like you I need multiple models going to fill in the time when glue and paint is drying or I get bored with something. Currently I am building the C W Morgan, City of Pekin, A6 A Intruder, Amelia Earhart’s Lockheed Electra (incidentally a horrible poorly fitting kit I have been messing with for ages) and a Guillows de Havilland Beaver  stick and tissue kit. I am only doing logs for the two ships as this is after all a ship model site. I will post the occasional non ship kit progress in the Shore Leave section 

Link to comment
Share on other sites

I have a Charles Morgan on the shelf, but I certainly need a few more ships under my belt before that one gets started!  If I was retired and had more space, I’d probably have more builds going on lol.  At one point I was trying to schedule the work for my boats and that was a disaster...took the fun right out of things.  I believe once I finish these build logs I might enjoy building one without a log.  I’m kind of embarrassed with the amount of ships I have in waiting...probably enough to keep me busy for a few years!

Link to comment
Share on other sites

1 hour ago, ragove said:

Very clever clamping idea for the stem. I’ll have to remember this!

Took me a few failed attempts before this thought came into my head. 

Link to comment
Share on other sites

Had some fun installing the bulwark stancions...eyes crossed now lol I also cut the scuppers in so that was fun!  And since this is not a real ship anyways I’m doing a little modification regarding where the rub rails go...to be continued.1593F327-B584-4E27-AF06-AF7CCD7946DB.thumb.jpeg.bb71e1e949db3bb70ae5045bf2fdd1bc.jpegD1D4BE4F-5209-4BDE-9DFF-6786F5529702.thumb.jpeg.f45ff2a4673ac74c25165cdbfcb97123.jpeg09806F74-55B6-406C-83F2-1D40D2B5B864.thumb.jpeg.17f8ec1f3e55a17717479c3c4e2086d6.jpeg90039331-54D9-482D-AA6C-9C8B67E4E29F.thumb.jpeg.a7029406571bf680aabc668025594b43.jpeg

Link to comment
Share on other sites

Some promotions lol and here’s a picture of a visitor from my backyard today!0C25F62E-6D86-4339-9AD6-912186BE5B84.thumb.jpeg.817884ffd43b3027d0ad135b933ea40a.jpegB2AA778B-8589-4686-8426-720F6609E08E.thumb.jpeg.a32fba751ee7d564853f0f791057248b.jpegBAF1A4D5-2C5F-4113-9220-84F9A1B28736.thumb.jpeg.8a4b9f5c1ec4532439585f792893e28f.jpeg

Link to comment
Share on other sites

So instead of using the card stock image for the exterior of the pilot house and main cabin I decided to drive myself nuts and use the smallest of wood possible...FE4D4D72-142C-4EFA-9D7D-0D969A2B09D3.thumb.jpeg.caa79774287e22b322da00a9fb5276b5.jpegE179E08C-2E6F-487C-BBA7-0FAB2E208537.thumb.jpeg.0c4e4b4a47ded5407ccf63fa7ee8415b.jpeg

i happen to think it looks so much better.

FEF66237-0CEC-467B-8036-B0581C3F361B.jpeg

70F2CC5E-9639-407F-BA58-F6B80CDF09DA.jpeg

 

I also installed the remainder of the rub rails.  

Edited by Duanelaker
Link to comment
Share on other sites

As I stated when I first started this build, I was hoping for practice for my phantom...i installed the top rail today in one piece and I have to say it went better than I thought it would!  I also installed the splash rails...rub rails next and the hull is pretty much ready for paint 😊9F2A57D8-5898-49A5-815E-C94CB5FE0306.thumb.jpeg.63ea85b9e6ed864ac43a98c9100ba996.jpeg563970FB-4D38-4391-84AC-0CF0164FBE50.thumb.jpeg.827088c45db7b98b05e0fa2ac163afcc.jpegA24E3CED-169A-418E-B076-B0035ED6A66E.thumb.jpeg.4df0bf2f042dba3f8ef1dc1b5b08e51c.jpeg7673E721-67D2-47AC-BC3E-E450971B0108.thumb.jpeg.142f21d0f48517c43f918098c2afa810.jpeg

Link to comment
Share on other sites

Link to comment
Share on other sites

More work completed on the main cabin...amazing how the camera picks up all of the imperfections!  Ah well, certainly worth the time...1A9D6C3F-2572-4AA2-9FA5-D310171D68DB.thumb.jpeg.3de0fb4e8b89a27109929f713a507142.jpeg9674B482-E055-46DE-AA3F-9D5BCDA90FF6.thumb.jpeg.d04ecdf2e11556f857400fe6ec506818.jpeg2BC56D96-F34D-4FE8-8751-29BEE6F242CE.thumb.jpeg.5e33deb8a544a6d22472314172da13e6.jpeg

FYI...it’s only put together for the picture

Link to comment
Share on other sites

More progress..I decided to by the paint kit from model expo since they had 40% off sale..why not.9C89819A-3FE2-466D-96C8-C8A3E25723CD.thumb.jpeg.c7be5402b8f6be1df86a1dc4cfa121f2.jpeg5A0E0B4C-98EE-4143-91FB-F33DBE587518.thumb.jpeg.cc590b0244bdbb31ac3c10dac4f0f12d.jpeg

B90F8404-0A03-42A4-9952-A1D8E122B1E3.jpeg

Link to comment
Share on other sites

I think for the most part I have gone as far as I can without picking up the dreaded paint brush.5F134E1F-983E-4438-A64C-CF7B62E6189C.thumb.jpeg.b153a91f5216f561739cf39d7ebf5f4e.jpeg511261AD-2FF2-4CD0-BE26-036A84DF5CA3.thumb.jpeg.ae63312910f4dfb6ccb58e38b4e42e76.jpeg8B6CC78C-8451-4772-9440-EA1A8A0436A6.thumb.jpeg.605375dc090607a9c06da135f468b065.jpeg

Link to comment
Share on other sites

Just for fun I cleaned up some fittings and laid them out to see what things will look like...this is actually a pretty nice model for the money!  Lots of details and since it isn’t a real boat as they state in the beginning of the kit you could go many directions or color schemes, which I am undecided still...thinking black hull and red cabins with white highlights.1B2B25B6-7066-4571-ADA6-43ACCE061D60.thumb.jpeg.e28662f988c813810c5d8ec31221a606.jpeg728BE6F2-62E0-43B8-8F55-C75C5652550D.thumb.jpeg.3c3e0befc5e2c214a4b2b167d09c9f0f.jpeg08E9DA05-F2E6-4E8D-9F32-6228C69E4B85.thumb.jpeg.5425764aff03bd46b749fcbc1819c2de.jpeg

Link to comment
Share on other sites

Also the grate looks ok with circular holes drilled I think...I didn’t have a file.reamer small enough to square of the holes anyways...

Link to comment
Share on other sites

So I tinkered with the air brush and it was easier then I thought!  Definitely need practice, and definitely to find a bigger or wider tip for larger items I think.FBA9DA77-7AB9-4A5F-8AFC-7033A21150EA.thumb.jpeg.48478ee2b13604e0a221ff55bf6ab9c1.jpegF7692F7D-7335-40CA-B2BD-287D94F6FA70.thumb.jpeg.071fb0c84329d0e2128927071d86e609.jpeg

 

 

Edited by Duanelaker
Link to comment
Share on other sites

Did a little more painting...it’s very nice to get things put together.  Had a rough weekend finding out my 4 year old son has type 1 diabetes.  So hard only seeing him on the weekends.  Ok enough personal stuff, here’s some pictures.35E4F9A4-18EB-4D56-A179-5B8A90478A65.thumb.jpeg.034661ec08390f81de0cf650209f0b55.jpeg6A17D104-DACC-41B9-8275-8B792FDA54E8.thumb.jpeg.543d6710430610ed83ac58afd2541151.jpeg

Link to comment
Share on other sites

Hi Duanelaker,

 

I've built four of these over the past 40 years. Original list price was $13.00.

Shaping the interior of the hull never got easier as I always struggled using a chisel.

My latest build, somewhat modified, sits in a river scene on my model railroad.

I believe the latest issue of the Taurus has an etched brass pilot and deck house.

That sure would make the build much easier and quicker.

 

Will follow you along to see what additional ideas you might come up with. I love

these little tugs as they add greatly to a maritime theme if in a diorama.

 

John Elwood

Link to comment
Share on other sites

3 hours ago, jbelwood said:

Hi Duanelaker,

 

I've built four of these over the past 40 years. Original list price was $13.00.

Shaping the interior of the hull never got easier as I always struggled using a chisel.

My latest build, somewhat modified, sits in a river scene on my model railroad.

I believe the latest issue of the Taurus has an etched brass pilot and deck house.

That sure would make the build much easier and quicker.

 

Will follow you along to see what additional ideas you might come up with. I love

these little tugs as they add greatly to a maritime theme if in a diorama.

 

John Elwood

Very nice!  I would love to see a picture of one if you don’t mind.  I found the bulwarks were easiest to carve with a dremel tool, followed by a scalpel with #11 blade for some fine carving...my kit which was purchased about two months ago was laser cut basswood for the pilot house.  Any advice on fastening the windows?   It has a lot of nice details.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...