LyleK1 Posted May 31, 2020 Author Share #31 Posted May 31, 2020 So, I was forced to deviate from the plans a little due to my not taking good measurements and keep the planks on a parallel with the wales. I chose not to start over or go back several planks because I got some good practice making dropped or stealer planks! Additionally, this is a teaching tool and I have learned a lot... and I'm not done. The last rows in the middle belt had to be modified to meet the wale properly: Last couple planks below the wale. Lower portion of the hull is done except for lots of sanding and finishing: On to the next part! RGR III, Edwardkenway, EricWilliamMarshall and 1 other 4 Quote Lyle "The only thing that stays the same is the constant state of change" Completed Builds: Occre HMS Terror - https://modelshipworld.com/gallery/album/2065-hms-terror-occre/ NRG Half Hull Project - https://modelshipworld.com/topic/23546-half-hull-project-by-lylek1-nrg/ 1:130 1847 Harvey - https://modelshipworld.com/gallery/album/2125-1847-baltimore-clipper-harvey-1130-scale/ Scott Miller's Sea of Galilee Boat - https://modelshipworld.com/topic/29007-sea-of-galilee-boat-by-se-miller-120-scale-lylek1/ In progress: Artesania Latina HMS Bounty - https://modelshipworld.com/topic/26817-hms-bounty-by-lylek1-artesania-latina-148-scale/ Waiting for dry-dock space: Model Shipways - USS Constitution Master Korbel - Cannon Jolle 1801 A Scratch build -TBD Link to comment Share on other sites More sharing options...
LyleK1 Posted June 6, 2020 Author Share #32 Posted June 6, 2020 Down to the last 3 planks and planking the counter and transom. Some decorative trim installed... more of that to come. Decided to change the color of the wale too: Should finish this weekend... depends on the sanding and finish. Planning to use Boiled Linseed Oil, 2-3 coats with a little steel wool sanding between coats. More pictures later in the weekend! Duanelaker, JohnLea, GrandpaPhil and 1 other 4 Quote Lyle "The only thing that stays the same is the constant state of change" Completed Builds: Occre HMS Terror - https://modelshipworld.com/gallery/album/2065-hms-terror-occre/ NRG Half Hull Project - https://modelshipworld.com/topic/23546-half-hull-project-by-lylek1-nrg/ 1:130 1847 Harvey - https://modelshipworld.com/gallery/album/2125-1847-baltimore-clipper-harvey-1130-scale/ Scott Miller's Sea of Galilee Boat - https://modelshipworld.com/topic/29007-sea-of-galilee-boat-by-se-miller-120-scale-lylek1/ In progress: Artesania Latina HMS Bounty - https://modelshipworld.com/topic/26817-hms-bounty-by-lylek1-artesania-latina-148-scale/ Waiting for dry-dock space: Model Shipways - USS Constitution Master Korbel - Cannon Jolle 1801 A Scratch build -TBD Link to comment Share on other sites More sharing options...
RGR III Posted June 6, 2020 Share #33 Posted June 6, 2020 Looks great. Thanks for posting. Quote Link to comment Share on other sites More sharing options...
LyleK1 Posted June 7, 2020 Author Share #34 Posted June 7, 2020 Finishing the final planks... Trim and rail caps... I decided to do something a little different but with similar results. Using some wood leftover from a previous build, I made the rail caps and the trim: All done except the linseed oil! Oh... and the mount. That will be a few days. Linseed oil and off the board coming up! kurtvd19, GrandpaPhil, EricWilliamMarshall and 1 other 4 Quote Lyle "The only thing that stays the same is the constant state of change" Completed Builds: Occre HMS Terror - https://modelshipworld.com/gallery/album/2065-hms-terror-occre/ NRG Half Hull Project - https://modelshipworld.com/topic/23546-half-hull-project-by-lylek1-nrg/ 1:130 1847 Harvey - https://modelshipworld.com/gallery/album/2125-1847-baltimore-clipper-harvey-1130-scale/ Scott Miller's Sea of Galilee Boat - https://modelshipworld.com/topic/29007-sea-of-galilee-boat-by-se-miller-120-scale-lylek1/ In progress: Artesania Latina HMS Bounty - https://modelshipworld.com/topic/26817-hms-bounty-by-lylek1-artesania-latina-148-scale/ Waiting for dry-dock space: Model Shipways - USS Constitution Master Korbel - Cannon Jolle 1801 A Scratch build -TBD Link to comment Share on other sites More sharing options...
LyleK1 Posted June 8, 2020 Author Share #35 Posted June 8, 2020 Two coats of linseed oil with a light buff with steel wool between the coats. I've removed it from the board and have a plan for mounting it. I'll post the final product in the next few days! I have thoroughly enjoyed doing this little project and I learned a lot... primarily through my mistakes!! They are easy to see for the trained eye but am happy with final product and of what I learned. kurtvd19, Duanelaker, bruce d and 3 others 6 Quote Lyle "The only thing that stays the same is the constant state of change" Completed Builds: Occre HMS Terror - https://modelshipworld.com/gallery/album/2065-hms-terror-occre/ NRG Half Hull Project - https://modelshipworld.com/topic/23546-half-hull-project-by-lylek1-nrg/ 1:130 1847 Harvey - https://modelshipworld.com/gallery/album/2125-1847-baltimore-clipper-harvey-1130-scale/ Scott Miller's Sea of Galilee Boat - https://modelshipworld.com/topic/29007-sea-of-galilee-boat-by-se-miller-120-scale-lylek1/ In progress: Artesania Latina HMS Bounty - https://modelshipworld.com/topic/26817-hms-bounty-by-lylek1-artesania-latina-148-scale/ Waiting for dry-dock space: Model Shipways - USS Constitution Master Korbel - Cannon Jolle 1801 A Scratch build -TBD Link to comment Share on other sites More sharing options...
RGR III Posted June 8, 2020 Share #36 Posted June 8, 2020 Your model looks great and your log is really helpful. Quote Link to comment Share on other sites More sharing options...
Cleat Posted June 9, 2020 Share #37 Posted June 9, 2020 I'm glad I came across this log. I was frustrated with planking during my first build. I found a reference to the kit and I'm considering it for my second build. I'll be referencing your build. LyleK1 1 Quote Completed Build: King of the Mississippi by Cleat Link to comment Share on other sites More sharing options...
LyleK1 Posted June 9, 2020 Author Share #38 Posted June 9, 2020 12 hours ago, Cleat said: I'm glad I came across this log. I was frustrated with planking during my first build. I found a reference to the kit and I'm considering it for my second build. I'll be referencing your build. I highly recommend it! But keep in mind, if you are building from a kit, the planks come pre-cut. You can still use many of the techniques but unless you purchase some matching material, it will be difficult to do some of the things you'll learn... For example the wider planks at the keel... I'm planning to start the HMS Bounty and I will be using many of the things I learned. Good luck and let me know how it goes! Duanelaker 1 Quote Lyle "The only thing that stays the same is the constant state of change" Completed Builds: Occre HMS Terror - https://modelshipworld.com/gallery/album/2065-hms-terror-occre/ NRG Half Hull Project - https://modelshipworld.com/topic/23546-half-hull-project-by-lylek1-nrg/ 1:130 1847 Harvey - https://modelshipworld.com/gallery/album/2125-1847-baltimore-clipper-harvey-1130-scale/ Scott Miller's Sea of Galilee Boat - https://modelshipworld.com/topic/29007-sea-of-galilee-boat-by-se-miller-120-scale-lylek1/ In progress: Artesania Latina HMS Bounty - https://modelshipworld.com/topic/26817-hms-bounty-by-lylek1-artesania-latina-148-scale/ Waiting for dry-dock space: Model Shipways - USS Constitution Master Korbel - Cannon Jolle 1801 A Scratch build -TBD Link to comment Share on other sites More sharing options...
tlevine Posted June 10, 2020 Share #39 Posted June 10, 2020 Very nice job. That linseed oil makes the basswood glow. Thanks for sharing. bruce d and Overworked724 2 Quote Toni Chairman Nautical Research Guild Member Nautical Research and Model Society Member Midwest Model Shipwrights Current Builds: NRG Rigging Project Completed Builds: Longboat - 1:48 scale HMS Atalanta-1775 - 1:48 scale Half Hull Planking Project Capstan Project Swallow 1779 - 1:48 scale Echo Cross Section Gallery: Hannah - 1:36 scale. Link to comment Share on other sites More sharing options...
LyleK1 Posted November 4, 2020 Author Share #40 Posted November 4, 2020 I finally got it mounted! Couple of screws in the plate and it's ready for display! bruce d, RGR III, GrandpaPhil and 9 others 12 Quote Lyle "The only thing that stays the same is the constant state of change" Completed Builds: Occre HMS Terror - https://modelshipworld.com/gallery/album/2065-hms-terror-occre/ NRG Half Hull Project - https://modelshipworld.com/topic/23546-half-hull-project-by-lylek1-nrg/ 1:130 1847 Harvey - https://modelshipworld.com/gallery/album/2125-1847-baltimore-clipper-harvey-1130-scale/ Scott Miller's Sea of Galilee Boat - https://modelshipworld.com/topic/29007-sea-of-galilee-boat-by-se-miller-120-scale-lylek1/ In progress: Artesania Latina HMS Bounty - https://modelshipworld.com/topic/26817-hms-bounty-by-lylek1-artesania-latina-148-scale/ Waiting for dry-dock space: Model Shipways - USS Constitution Master Korbel - Cannon Jolle 1801 A Scratch build -TBD Link to comment Share on other sites More sharing options...
Overworked724 Posted November 4, 2020 Share #41 Posted November 4, 2020 Outstanding!!!! LyleK1 1 Quote ---------------------------------------------------- “Work like a Captain....Play like a Pirate!” — Every Ship Modeler...everywhere. Link to comment Share on other sites More sharing options...
Cleat Posted December 3, 2020 Share #42 Posted December 3, 2020 I'm about to start the Half Hull project kit. But the first thing I came across reading the instructions is that I don't know the terminology such as keelson, sternpost, etc. Is there a place I can find a list of ship terminology? Quote Completed Build: King of the Mississippi by Cleat Link to comment Share on other sites More sharing options...
kurtvd19 Posted December 3, 2020 Share #43 Posted December 3, 2020 The instructions plus the photos should give you a good guide but below are a couple of on-line dictionaries that should help. If you want a good print book The Oxford Companion to Ships and the Sea edited by Peter Kemp is what sits on my shelf. I am not usually a fan of Wikipedia but this reference is pretty good. https://en.wikipedia.org/wiki/Glossary_of_nautical_terms http://phrontistery.info/nautical.html https://officerofthewatch.com/tools/maritime-dictionary/ Ryland Craze, EricWilliamMarshall and LyleK1 3 Quote Kurt Van Dahm Director NAUTICAL RESEARCH GUILD www.thenrg.org SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS CLUBS Nautical Research & Model Ship Society of Chicago Midwest Model Shipwrights North Shore Deadeyes The Society of Model Shipwrights Butch O'Hare - IPMS Link to comment Share on other sites More sharing options...
MaryG Posted March 5, 2022 Share #44 Posted March 5, 2022 Thanks so much for your half hull planking log. I received my model a few weeks ago. I am so nervous to start but need to dive in. I know your blog will help me along the way. You did an excellent job! Beautiful! VTHokiEE, mtaylor and LyleK1 2 1 Quote Link to comment Share on other sites More sharing options...
LyleK1 Posted March 5, 2022 Author Share #45 Posted March 5, 2022 6 minutes ago, MaryG said: Thanks so much for your half hull planking log. I received my model a few weeks ago. I am so nervous to start but need to dive in. I know your blog will help me along the way. You did an excellent job! Beautiful! Thank you! Good luck. Let me know if I can help! mtaylor 1 Quote Lyle "The only thing that stays the same is the constant state of change" Completed Builds: Occre HMS Terror - https://modelshipworld.com/gallery/album/2065-hms-terror-occre/ NRG Half Hull Project - https://modelshipworld.com/topic/23546-half-hull-project-by-lylek1-nrg/ 1:130 1847 Harvey - https://modelshipworld.com/gallery/album/2125-1847-baltimore-clipper-harvey-1130-scale/ Scott Miller's Sea of Galilee Boat - https://modelshipworld.com/topic/29007-sea-of-galilee-boat-by-se-miller-120-scale-lylek1/ In progress: Artesania Latina HMS Bounty - https://modelshipworld.com/topic/26817-hms-bounty-by-lylek1-artesania-latina-148-scale/ Waiting for dry-dock space: Model Shipways - USS Constitution Master Korbel - Cannon Jolle 1801 A Scratch build -TBD Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.