captainbob Posted July 7, 2013 #31 Posted July 7, 2013 Hi, Elmir, She's looking good. Bob Wishmaster 1 Every build is a learning experience. Current build: SS_ Mariefred Completed builds: US Coast Guard Pequot Friendship-sloop, Schooner Lettie-G.-Howard, Spray, Grand-Banks-dory, a gaff rigged yawl, HOGA (YT-146), Int'l Dragon Class II, Two Edwardian Launches In the Gallery: Catboat, International-Dragon-Class, Spray
Wishmaster Posted July 7, 2013 Author #32 Posted July 7, 2013 Thanks Anja and Bob. Well Anja about preparations for deck Well where l live you can't find some wood sheet thick about 0,5 mm or 1mm to glue them to frames and have nice surface for deck. So I made wood parts to fill big holes between frames and then I use a wood putty. So next is sanding and I think I will have fine surface for deck planks. mtaylor and Anja 2 Current build: LA MARTEGAOU Past build: BRACERA "Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do... Sail away from the safe harbor. Catch the tradewinds in your sails. Explore. Dream. Discover" KIND REGARDS! ELMIR
Anja Posted July 8, 2013 #33 Posted July 8, 2013 Hello Elmir, Thank you for the explanation. Anja Those we loved but lost are no longer where they were, but are always where we are. In the gallery: Albatros 1840 - Constructo
Wishmaster Posted July 8, 2013 Author #34 Posted July 8, 2013 Continuation: Making planks for deck: Holes for water from deck: One hole is higher which will be seen better when I glue plank which is in line with deck. Well it isn't first mistake and won't be last I'm sure EdT and yvesvidal 2 Current build: LA MARTEGAOU Past build: BRACERA "Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do... Sail away from the safe harbor. Catch the tradewinds in your sails. Explore. Dream. Discover" KIND REGARDS! ELMIR
Anja Posted July 9, 2013 #35 Posted July 9, 2013 Hello Elmir, Nice job on sawing the planks. They look good. 'Experience is simply the name we give to our mistakes'. I think it was Oscar Wilde who said that. Good luck. Anja Wishmaster 1 Those we loved but lost are no longer where they were, but are always where we are. In the gallery: Albatros 1840 - Constructo
Wishmaster Posted July 10, 2013 Author #36 Posted July 10, 2013 Tnx Anja. Right words Continuation Deck hatches and openings for anchor rope: Anja and yvesvidal 2 Current build: LA MARTEGAOU Past build: BRACERA "Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do... Sail away from the safe harbor. Catch the tradewinds in your sails. Explore. Dream. Discover" KIND REGARDS! ELMIR
Albuk Posted July 10, 2013 #37 Posted July 10, 2013 Nice job Elmir. I see you have put your build into fift gear. Cheers, Alex Wishmaster 1 Current build: Bracera Previous build: Norden
Wishmaster Posted July 10, 2013 Author #38 Posted July 10, 2013 (edited) Thanks Alex. Yes I have a little extra time. And I'm waiting news from your build log? Edited July 10, 2013 by Wishmaster Albuk 1 Current build: LA MARTEGAOU Past build: BRACERA "Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do... Sail away from the safe harbor. Catch the tradewinds in your sails. Explore. Dream. Discover" KIND REGARDS! ELMIR
michael mott Posted July 11, 2013 #39 Posted July 11, 2013 Nice work on the hatch and the sawn planks, I am looking forward to seeing the deck go down. Michael Wishmaster 1 Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
Albuk Posted July 11, 2013 #40 Posted July 11, 2013 Thanks Alex. Yes I have a little extra time. And I'm waiting news from your build log? I'm on vacations... Wishmaster 1 Current build: Bracera Previous build: Norden
Wishmaster Posted July 15, 2013 Author #41 Posted July 15, 2013 Well somebody is on vacation and somebody works Continuation Works on deck. Its mix of ink and glue. It's very dirty but also fast and effective yvesvidal, Jeronimo, mtaylor and 1 other 4 Current build: LA MARTEGAOU Past build: BRACERA "Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do... Sail away from the safe harbor. Catch the tradewinds in your sails. Explore. Dream. Discover" KIND REGARDS! ELMIR
Anja Posted July 16, 2013 #42 Posted July 16, 2013 Very nice progress Elmir, The planks look indeed 'dirty' as you said. What will you do with the deck once it is finished planking? Anja Wishmaster 1 Those we loved but lost are no longer where they were, but are always where we are. In the gallery: Albatros 1840 - Constructo
Wishmaster Posted July 16, 2013 Author #43 Posted July 16, 2013 (edited) Thanks Anja. Well I will take off (sand) about half mm of deck as planned to get nice surface. So it should be enough to take off this mess also ? Edited July 16, 2013 by Wishmaster Current build: LA MARTEGAOU Past build: BRACERA "Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do... Sail away from the safe harbor. Catch the tradewinds in your sails. Explore. Dream. Discover" KIND REGARDS! ELMIR
Kevin Posted July 16, 2013 #44 Posted July 16, 2013 i am interested to see how much the planks will clean up, i had guessed the ink would stain through the full depth of the plank Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 On hold MHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished Belle Poule 1834 by Kevin - OcCre - 1/90 - French frigate - started June 2024 - - Hercules by Kevin - OcCre - 1/50 - Tugboat - Finished - May 2024 Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat
Wishmaster Posted July 16, 2013 Author #45 Posted July 16, 2013 Well I seen this method many times. But also Kevin you might have a right. Best option is to little sand this planks to see result ? I'm beginner so everything is possible. I can not ignore warnings from my older and experienced colleagues. Thanks Current build: LA MARTEGAOU Past build: BRACERA "Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do... Sail away from the safe harbor. Catch the tradewinds in your sails. Explore. Dream. Discover" KIND REGARDS! ELMIR
Kevin Posted July 16, 2013 #46 Posted July 16, 2013 although i tend to use a permanent market on one edge of each board - i still get some bleeding, other prefer using card, which gives a nice result, i hope your way works Wishmaster 1 Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 On hold MHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished Belle Poule 1834 by Kevin - OcCre - 1/90 - French frigate - started June 2024 - - Hercules by Kevin - OcCre - 1/50 - Tugboat - Finished - May 2024 Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat
Wishmaster Posted July 16, 2013 Author #47 Posted July 16, 2013 Well i tried just a little sanding and here is result. sonicmcdude, Anja, NenadM and 2 others 5 Current build: LA MARTEGAOU Past build: BRACERA "Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do... Sail away from the safe harbor. Catch the tradewinds in your sails. Explore. Dream. Discover" KIND REGARDS! ELMIR
Anja Posted July 16, 2013 #48 Posted July 16, 2013 Hello Elmir, It looks good after the sanding. Anja Wishmaster 1 Those we loved but lost are no longer where they were, but are always where we are. In the gallery: Albatros 1840 - Constructo
mtaylor Posted July 16, 2013 #49 Posted July 16, 2013 Looks great after sanding... Wishmaster 1 Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Dida Posted July 18, 2013 #50 Posted July 18, 2013 The deck will be beautiful! Wishmaster 1 Kind regards, Hrvoje Finished: Leut by Dida My current build: Leut II My forum dealing with traditional Croatian and Mediterranean shipbuilding: http://drvenibrodovi.forumotion.eu.
tlevine Posted July 19, 2013 #51 Posted July 19, 2013 Before you go any farther with the deck, make a mock-up off the model and then apply a coat of finish. If there is going to be any bleeding, it will show up then. mtaylor and 4whelr 2 Toni Director Nautical Research Guild Member Nautical Research and Model Society Member Midwest Model Shipwrights Member IPMS Current Builds: Utrecht-1742 Completed Builds: Longboat - 1:48 scale HMS Atalanta-1775 - 1:48 scale Half Hull Planking Project Capstan Project Swallow 1779 - 1:48 scale Echo Cross Section NRG Rigging Project Utrecht-1742 Gallery: Hannah - 1:36 scale.
Wishmaster Posted July 20, 2013 Author #52 Posted July 20, 2013 I'm not sure that I understand you very well Toni. Are you saying about possibility of stains from ink after wet finish apply? If that so deck is already finished yesterday And also from beginning I'm aware of that possibility but I think that glue and ink are now solid mix and won't make problems with linen oil. We will see in next few days Cheers everyone and thanks my friends for interest, kind words and encouragement. Current build: LA MARTEGAOU Past build: BRACERA "Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do... Sail away from the safe harbor. Catch the tradewinds in your sails. Explore. Dream. Discover" KIND REGARDS! ELMIR
tlevine Posted July 20, 2013 #53 Posted July 20, 2013 Elmir, I am not sure what linen oil is...maybe linseed oil? From personal experience, I have had the experience of bleeding as a result of the finish being applied. I hope you do not have any problems. Wishmaster 1 Toni Director Nautical Research Guild Member Nautical Research and Model Society Member Midwest Model Shipwrights Member IPMS Current Builds: Utrecht-1742 Completed Builds: Longboat - 1:48 scale HMS Atalanta-1775 - 1:48 scale Half Hull Planking Project Capstan Project Swallow 1779 - 1:48 scale Echo Cross Section NRG Rigging Project Utrecht-1742 Gallery: Hannah - 1:36 scale.
Wishmaster Posted July 29, 2013 Author #54 Posted July 29, 2013 Continuation: Well i work a little and here is result how Bracera look now (black color and flax oil are aplied) Anja, mtaylor, sonicmcdude and 1 other 4 Current build: LA MARTEGAOU Past build: BRACERA "Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do... Sail away from the safe harbor. Catch the tradewinds in your sails. Explore. Dream. Discover" KIND REGARDS! ELMIR
NenadM Posted July 29, 2013 #55 Posted July 29, 2013 Elmir What is the elevation of the fourth support post from the bow to the deck ? In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic
Wishmaster Posted July 29, 2013 Author #56 Posted July 29, 2013 About 1,5cm. Current build: LA MARTEGAOU Past build: BRACERA "Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do... Sail away from the safe harbor. Catch the tradewinds in your sails. Explore. Dream. Discover" KIND REGARDS! ELMIR
Anja Posted July 30, 2013 #57 Posted July 30, 2013 Hello Elmir, Well done on the paintjob. She's looking good. Anja Wishmaster 1 Those we loved but lost are no longer where they were, but are always where we are. In the gallery: Albatros 1840 - Constructo
michael mott Posted July 30, 2013 #58 Posted July 30, 2013 Elmir the work you have done so far looks terrific. Michael Wishmaster 1 Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
Albuk Posted July 30, 2013 #59 Posted July 30, 2013 Wow! It looks beautifull! Can't wait for the rest of it! Wishmaster 1 Current build: Bracera Previous build: Norden
captainbob Posted July 31, 2013 #60 Posted July 31, 2013 Sweet looking hull. Nice job. Bob Wishmaster 1 Every build is a learning experience. Current build: SS_ Mariefred Completed builds: US Coast Guard Pequot Friendship-sloop, Schooner Lettie-G.-Howard, Spray, Grand-Banks-dory, a gaff rigged yawl, HOGA (YT-146), Int'l Dragon Class II, Two Edwardian Launches In the Gallery: Catboat, International-Dragon-Class, Spray
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now