neilm Posted February 4, 2021 Author #31 Posted February 4, 2021 Many thanks, so confusing as these shots show same dia. I feel it would look ascetically better thinning halfway up but these pics seem not to. 😩 sferoida and Bettina 2
Wintergreen Posted February 5, 2021 #32 Posted February 5, 2021 It IS kind of an unusual boat anyway. I'd say follow the crowd, i.e. no taper. You have photographic evidence to support your choice. But it is always good to sit back, do a bit of web-trawling and ponder over alternatives 😉 Keep it up! neilm 1 Happy modelling! Håkan __________________________________________ Current build: Atlantica by Wintergreen Previous builds Kågen by Wintergreen Regina by Wintergreen Sea of Galilee boat, first century, sort of... Billing Boats Wasa Gallery: Kågen (Cog, kaeg) by Wintergreen - 1:30, Billing Boats Regina - 1:30, Billing Boats Dana,
neilm Posted February 5, 2021 Author #33 Posted February 5, 2021 Yes. Thank you for you reply Wintergreen. Much appreciated. Wintergreen 1
FlyingFish Posted February 6, 2021 #34 Posted February 6, 2021 Your shots are from two different models (although the first of Eric Hollander's boat shows the fantastic detail he modelled). The original was not the same. Some thoughts from my research on this which may help... The mast is an addition to Warlock (the original Orca) by the production team, so is probably taken from another boat, and possibly shortened. It was oval, not round, roughly 6" by 8" at the base, and not tapered, although it looks as if it gets rounder at the top. If you are using Pat Tritle's plan, he has the mast some way from the pilot house, whereas the original was against the aft wall, and strapped to the pilot house roof. There are lots of details of the mast from the movie, most consistent, but the lights shown here below Quint's feet were only seen in some shots, so maybe for filming. As you'll read from my blog it is possible the mast was offset from the centreline; (count the deck planks) which presents a bit of a dilemma for the modeller! neilm, Rik Thistle, mtaylor and 2 others 5 Andy 'You're gonna need a bigger boat!' Completed Build: Orca from the film 'Jaws'. Current Build: Sailing Trawler Vigilance BM76
FlyingFish Posted February 6, 2021 #35 Posted February 6, 2021 This one shows it getting round at the top, but is from Orca II - assume this was the same as Orca I.. (Mind your toes...!) Rik Thistle, neilm, G.L. and 1 other 4 Andy 'You're gonna need a bigger boat!' Completed Build: Orca from the film 'Jaws'. Current Build: Sailing Trawler Vigilance BM76
Rik Thistle Posted February 6, 2021 #36 Posted February 6, 2021 FlyingFish, Your pics have now got me wanting to watch the movie again 😉 I've probably watched it at least half a dozen times over the years but (in my mind) it's a classic that ticked a lot of boxes ie great script based on a fairly simple but powerful story line, exciting and scary, three lead actors at the top of their game and great cinematography. Richard Matt D, mtaylor and neilm 3 Current build: U.S. Army K51 Radio Truck with K52 Trailer - 1944 - MiniArt - 1:35 Next build: PM Research Crank Shaper - late 1800s - 1:12 Part finished: HMS Flirt (MSE) - 1782 Vanguard Models - 1:64 Finished: Archer anti-tank gun Diorama - 1944 -Tamiya 1:35 : Churchill MkVII tank Diorama - Tamiya - 1:35 - 1944 : Sherman Firefly Tank Diorama - Revell - 1/76 - WWII : Humber MkII Scout Car Diorama - - Revell - 1:76 - WWII : PM Research Drill Press - 1895 - 1:12 : PM Research Milling Machine - late 1800s - 1:12 (est) : Stuart Engineering Lathe - late 1800s - 1:12 (est) : Stuart Beam model steam engine - 1770s onwards - 1:12 (est) : Stuart 10V model steam engine circa 1920s - 1:12 (est) : Lady Eleanor Fifie Circa 1900 - Vanguard Models - 1:64 : Dallas Cutter 1815 - Artesania Latina - 1:50
neilm Posted February 6, 2021 Author #37 Posted February 6, 2021 Thank you Flying fish. Really helpful. I am not using the plans anymore as the details are vague but constantly pausing the film to catch details. Keep helping me please on various issues. Thank you kind gent ☺ mtaylor 1
FlyingFish Posted February 6, 2021 #38 Posted February 6, 2021 No problem. You may find this easier than pausing the film... https://movie-screencaps.com/jaws-1975/53/ mtaylor and neilm 1 1 Andy 'You're gonna need a bigger boat!' Completed Build: Orca from the film 'Jaws'. Current Build: Sailing Trawler Vigilance BM76
neilm Posted February 7, 2021 Author #39 Posted February 7, 2021 Fantastic Flying fish. Thank you. Cool
neilm Posted February 14, 2021 Author #40 Posted February 14, 2021 Little more done on her. FlyingFish, mtaylor, leclaire and 6 others 9
Wintergreen Posted February 14, 2021 #41 Posted February 14, 2021 Coming together nicely Neil. Looks like you've served the pulpit with a thin thread? Spot on how it looks i real life. The wheel on my sailboat was served when I bought it and it looked just the same. You may, however, want to dab the serving with diluted white glue or something to take away the fuzziness of the thread. Keep it up! neilm and mtaylor 1 1 Happy modelling! Håkan __________________________________________ Current build: Atlantica by Wintergreen Previous builds Kågen by Wintergreen Regina by Wintergreen Sea of Galilee boat, first century, sort of... Billing Boats Wasa Gallery: Kågen (Cog, kaeg) by Wintergreen - 1:30, Billing Boats Regina - 1:30, Billing Boats Dana,
neilm Posted February 14, 2021 Author #42 Posted February 14, 2021 Great idea Wintergreen. Many thanks, have just done a final wrap. Will post later. Thank you. mtaylor and Wintergreen 2
neilm Posted February 18, 2021 Author #43 Posted February 18, 2021 Steadily getting some details done GrandpaPhil, mtaylor, G.L. and 7 others 9 1
Wintergreen Posted February 18, 2021 #44 Posted February 18, 2021 Excellent detailing and weathering. She really looks like she's been out numerous times. But where on earth did you get the jaws??? neilm and mtaylor 2 Happy modelling! Håkan __________________________________________ Current build: Atlantica by Wintergreen Previous builds Kågen by Wintergreen Regina by Wintergreen Sea of Galilee boat, first century, sort of... Billing Boats Wasa Gallery: Kågen (Cog, kaeg) by Wintergreen - 1:30, Billing Boats Regina - 1:30, Billing Boats Dana,
FlyingFish Posted February 18, 2021 #45 Posted February 18, 2021 Great progress, and some great skills demonstrated here! mtaylor and neilm 1 1 Andy 'You're gonna need a bigger boat!' Completed Build: Orca from the film 'Jaws'. Current Build: Sailing Trawler Vigilance BM76
toms10 Posted February 18, 2021 #46 Posted February 18, 2021 Really nice job. Love the scuff marks on the yellow barrels. 3D printed jaws?? Pretty cool. Extremely cool if they are actual jaws from a micro-shark! 🤪 Tom neilm and mtaylor 1 1 Attitude is the difference between ordeal and adventure. Finished: Viking Drakkar, scratch 1:64 Viking longboat by toms10 - scale 1:64 - late 9th century - - Subjects built Up to and including 1500 AD - Model Ship World™ Finished: Charles W. Morgan, scratch 1:96 https://modelshipworld.com/topic/30666-charles-w-morgan-1841-scratch-196-pob-by-toms10 Finished: HMS Leopard, scratch 1:85 https://modelshipworld.com/gallery/album/2403-hms-leopard-scale-185 Finished: Constellation AL Kit, scale - 1:85 http://modelshipworld.com/index.php?/gallery/album/1383-constellation-al-185-by-tom-szabo/
neilm Posted February 18, 2021 Author #47 Posted February 18, 2021 Many thanks guys. Wintergreen... A mate of mine printed them. Printed a load from 10 mill to 50 mill. Just chose my size to fit. ☺ Any size you want, same as the barrels. Cool eh ? Wintergreen 1
neilm Posted February 18, 2021 Author #48 Posted February 18, 2021 So fragile as well, cutting them off the trays. goatfarmer11, G.L., Wintergreen and 5 others 8
neilm Posted February 26, 2021 Author #49 Posted February 26, 2021 Searchlight, ladder soldered and some internal fitting out. All WIP. Captain Poison, Ron Burns, toms10 and 11 others 14
FlyingFish Posted February 26, 2021 #50 Posted February 26, 2021 It's really looking the part now - lovely woodwork! mtaylor and neilm 1 1 Andy 'You're gonna need a bigger boat!' Completed Build: Orca from the film 'Jaws'. Current Build: Sailing Trawler Vigilance BM76
Wintergreen Posted February 26, 2021 #51 Posted February 26, 2021 Yep, that searchlight is really accurate 🙂 neilm and mtaylor 1 1 Happy modelling! Håkan __________________________________________ Current build: Atlantica by Wintergreen Previous builds Kågen by Wintergreen Regina by Wintergreen Sea of Galilee boat, first century, sort of... Billing Boats Wasa Gallery: Kågen (Cog, kaeg) by Wintergreen - 1:30, Billing Boats Regina - 1:30, Billing Boats Dana,
neilm Posted February 26, 2021 Author #52 Posted February 26, 2021 Thank you Winter and Flying. Much appreciated 😊
neilm Posted March 10, 2021 Author #53 Posted March 10, 2021 Slowly but still focused.😊 GrandpaPhil, Matt D, G.L. and 1 other 4
neilm Posted March 10, 2021 Author #54 Posted March 10, 2021 GrandpaPhil, Wintergreen, Omega1234 and 3 others 6
FlyingFish Posted March 10, 2021 #56 Posted March 10, 2021 You've been busy! Great detailing, and lots of attention to accuracy. I see the ships dog is on hand for the launch! neilm 1 Andy 'You're gonna need a bigger boat!' Completed Build: Orca from the film 'Jaws'. Current Build: Sailing Trawler Vigilance BM76
KeithAug Posted March 10, 2021 #57 Posted March 10, 2021 Im not really a Jaws fan but it was on TV last week and you forced me to watch it as a check om your build. I concluded that you were doing an excellent job. neilm 1 Keith Current Build:- Cangarda (Steam Yacht) - Scale 1:24 Previous Builds:- Schooner Germania (Nova) - Scale 1:36 https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/ Schooner Altair by KeithAug - Scale 1:32 - 1931 http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702 J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration. http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029 Other Topics Nautical Adventures http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846
Matt D Posted March 10, 2021 #58 Posted March 10, 2021 Your Orca looks fantastic! I’m a big Jaws fan, so this model really draws me in. Your details like the gages are nicely done. I sure hope the tach isn’t redlined again! neilm 1 Current Build: HMS Winchelsea 1:48 (Group Project) Completed Builds: Virginia 1819 Artesania Latina - 1:41
neilm Posted March 19, 2021 Author #59 Posted March 19, 2021 The interior as good as done. Few more details on the rest.😊 Omega1234, FlyingFish, G.L. and 5 others 7 1
72Nova Posted March 19, 2021 #60 Posted March 19, 2021 This is too cool!, love it!!, nice work! Michael D. neilm 1 Completed: https://modelshipworld.com/topic/20561-reale-de-france-by-72nova-finished-heller/ HMS Victory 1765: https://photos.google.com/share/AF1QipPrp-3y7ntwH1vwfFsMMf0bWByRebwVKqePmRLqCx3aptq5sMlGZp_LtYv0v-seiQ?key=RWdjbWRKQWs2X1JSaDAyVTRuMHk5U3dOTHJCSDVB Completed: https://modelshipworld.com/topic/33007-vasa-by-72nova-airfix-plastic/
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now