Steve Anderson Posted June 19 Author #91 Posted June 19 (edited) Big thanks to all for your comments. Part 13 The Case Completion The Winter of '22-'23. Rains storms, high winds, and flooding rumbled through California. After years of drought, Mother Nature more than made up for it in three monthes. In my drawings I planned to have the the left facing side hinged for access. I realized the arc of the travel would be too high and awkward. In addition the weight of the panel would put too much stress on the whole structure. In order to keep the frames the same dimension all around I designed and built a corner mockup, seen below, with interlocking cuts. The outside piece remains in place as part of the case, while inside piece is the removable frame and its plex. Now one may ask, how do you remove and replace the access panel? On each corner there is a quarter radious tab that turns 90 degrees to release the panel. With the two knobs pull and loosen the bottom, then with one hand hold the top and remove. Same way in reverse to install. The final touch was engraving the builder's plate. When it finally has a patina I will polish the surface so the letters show up better. Thank you all for showing interest and for your valued comments. Edited June 19 by Steve Anderson Thukydides, gjdale, Martes and 33 others 18 1 17 Quote
AON Posted June 19 #92 Posted June 19 Just lovely. No other words for it. Well done! BZ mtaylor, Thukydides, billocrates and 3 others 5 1 Quote Alan O'Neill "only dead fish go with the flow" Ongoing Build (31 Dec 2013) - HMS BELLEROPHON (1786), POF scratch build, scale 1:64, 74 gun 3rd rate Man of War, Arrogant Class Member of the Model Shipwrights of Niagara, Niagara Region, Ontario, Canada (2016), and the Nautical Research Guild (since 2014) Associate member of the Nautical Research and Model Ship Society (2021) Offshore member of The Society of Model Shipwrights (2021)
Seahawk1313 Posted June 20 #93 Posted June 20 Just wonderful! Words just do not do justice to work and skill. - Hal billocrates, Knocklouder and mtaylor 3 Quote
Steve Anderson Posted June 20 Author #94 Posted June 20 Thanks, Alan and Seahawk. mtaylor and AON 2 Quote
AnobiumPunctatum Posted June 21 #95 Posted June 21 Really a beauty. You build a fantastic model of her. cotrecerf and mtaylor 2 Quote Regards Christian Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36 On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777 Paused: HMS Triton, 1771 - 1/48 "Have no fear of perfection - you'll never reach it." Salvador Dali
scrubbyj427 Posted June 21 #96 Posted June 21 Congratulations Steve! Incredible achievement! It’s refreshing to see this early version of Victory. cotrecerf, shipman and mtaylor 3 Quote Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship
Steve Anderson Posted June 26 Author #98 Posted June 26 Thanks Christian, Scrubby, and Michel. It's been a long, long road. I look at it sometimes and can't believe I did it. scrubbyj427, AnobiumPunctatum, druxey and 1 other 4 Quote
dvm27 Posted June 27 #99 Posted June 27 Your model looks like it belongs in the Naval Academy Museum. Well done! yvesvidal, mtaylor, Steve Anderson and 1 other 4 Quote GregwebsiteAdmiralty Modelsmoderator Echo Cross-section buildAdmiralty Models Cross-section BuildFinished buildPegasus, 1776, cross-sectionCurrent buildSpeedwell, 1752
Steve Anderson Posted June 27 Author #100 Posted June 27 Thanks Christian, Scrubby, and Michel. It's been a long, long road. I look at it sometimes and can't believe I did it. Thank you Greg for the compliment. Are you speaking of Preble Hall? Been there several times. Shot lots of photos that really inspired me. AnobiumPunctatum, mtaylor and scrubbyj427 3 Quote
jfhealey Posted June 28 #101 Posted June 28 A stunning model set off in a beautiful case. In a hundred years time perhaps one of your great grandchildren will say to his chums: "My great grandad made that" and they will look on with wonder. Best wishes Fred mtaylor, Ronald-V and scrubbyj427 3 Quote
GrandpaPhil Posted July 1 #102 Posted July 1 Excellent work! mtaylor 1 Quote Building: 1:200 Russian Battleship Oryol (Orel card kit) 1:64 HMS Revenge (Victory Models plans) 1:64 Cat Esther (17th Century Dutch Merchant Ships)
Steve Anderson Posted July 15 Author #103 Posted July 15 Thank you Fred. A very inspiring comment. Thanks, Phil. Quote
seamymcnally Posted July 22 #104 Posted July 22 First class work.Something to be more than proud of mtaylor 1 Quote
druxey Posted July 22 #105 Posted July 22 That is one outstanding model, Steve. A great example also of seeing a huge project through over so many years. Well done, indeed. Guyuti and mtaylor 1 1 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
Steve Anderson Posted July 22 Author #106 Posted July 22 Thanks Seamy and Druxey. druxey and mtaylor 2 Quote
Gasper Posted August 10 #107 Posted August 10 Amazing work. It’s stunning. Can i ask where did you find and buy plans? I am looking for them and I can’t find them anywhere. So I would be happy and grateful if you can help me with this issue. Could you please send me a link where you buy the plans. Thank you very much. Have a great day Gasper mtaylor and Guyuti 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.