HardeeHarHar Posted October 3, 2022 Share #1 Posted October 3, 2022 Alas, I am currently away from the Granado build at the "Roanoke Island Shipyard" on the coast (sigh), so I have established a mini-secondary-shipyard to occupy my free time and irritate the Admiral. Because of the limited resources available at this inland location, I have elected to build the little wooden submarine "Morel". It is a kit made in Russia, but I had purchased it before Russia's/Putin's egregious land grab in the Ukraine had begun. Regardless of its origin and global politics, it appears to be a nice simple kit that will be a lot easier to build and less time-consuming to finish than the Granado build. There are also lots of good build logs out there for me to benefit from (e.g., Secret Vessel "Morel" by John Gummersall - FINISHED - Master Korabel - Scale 1:36). Because of the existing and outstanding build logs already out there, this one will be abbreviated at best, so please forgive my abruptly jumping in with both feet and a photograph of the build and a beer already in progress: clearway, hollowneck, AJohnson and 4 others 6 1 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model Link to comment Share on other sites More sharing options...
Peanut6 Posted October 13, 2022 Share #2 Posted October 13, 2022 With a glass of the "Golden Nectar", I see that you've started off this project on the right foot. No cannons and no rigging, you probably will have this one done pretty quick HardeeHarHar, AJohnson and hollowneck 1 2 Quote Take care and be safe. kev Current Build: HMS Bounty's Jolly Boat - Artesania Latina On the shelf: Oseberg #518 - Billing Boats Link to comment Share on other sites More sharing options...
HardeeHarHar Posted October 13, 2022 Author Share #3 Posted October 13, 2022 I was thinking of making it a port decanter, to hold a “tawny nectar” 🙂 Knocklouder, Peanut6 and AJohnson 2 1 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model Link to comment Share on other sites More sharing options...
HardeeHarHar Posted October 28, 2022 Author Share #4 Posted October 28, 2022 Meanwhile, back at the ranch....I have to admit that this kit is nicely done so far. I have relearned how to use PVA glue in order to enclose the windows into their window frames without causing the plastic "glass" to fog up. They came together fairly well, and the glass came through the process unscathed much to my surprise. One window was done with my contact lenses in, which means I couldn't see close up very well. The other was done with my contacts out, which means I could see close up very well. The difference was quite apparent (with my contacts out), but not so much as to require a re-do. I also assembled the ladder, which being enclosed within the secret vessel won't even be seen. That didn't stop me from sanding it down and removing the char, etc. Apparently there is some form of brain-washing being used on MSW, where you slowly become convinced you need to do everything to the best of your ability, even if it will never be seen. Thanks for stopping by peeps, best regards to everyone! GrandpaPhil, clearway, VTHokiEE and 5 others 8 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model Link to comment Share on other sites More sharing options...
HardeeHarHar Posted October 29, 2022 Author Share #5 Posted October 29, 2022 This kit really comes together quite well. The transverse ribs almost snap into place. You have to push, but they are all able to be firmly set evenly along the entire length of the little ship. Peanut6, AJohnson, Knocklouder and 4 others 7 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model Link to comment Share on other sites More sharing options...
HardeeHarHar Posted November 1, 2022 Author Share #6 Posted November 1, 2022 The jig provided with this kit for bending planks is very nicely done. It works particularly well if you put two planks in each slot (heh heh heh @John Gummersall, surprise! =). I followed the instructions about staggering the planking order around the circumference, and it had its positive and negatives. All that is left is to fill in the last planks that have been filed to fit exactly. Time consuming yes, but doable and required. AJohnson, Knocklouder, CiscoH and 3 others 6 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model Link to comment Share on other sites More sharing options...
Peanut6 Posted November 12, 2022 Share #7 Posted November 12, 2022 Hey HHH, I finally remembered to check this one out again. Nice work. I don't think MSW has brainwashed us, rather reinforcing an inborn trait we builders already possess. As far as the ladder goes, I bet just enough can be seen through the windows for the observer to notice. And if not, you'll know they are there and that'll still give you the warm fuzzies. HardeeHarHar 1 Quote Take care and be safe. kev Current Build: HMS Bounty's Jolly Boat - Artesania Latina On the shelf: Oseberg #518 - Billing Boats Link to comment Share on other sites More sharing options...
HardeeHarHar Posted November 26, 2022 Author Share #8 Posted November 26, 2022 All planking has been done on the main keg section of the Secret Vessel. In the photos below, I have cleaned all the saw dust out of the seams to reveal all the gaps in the planking that need to be filled. I was not too upset with the final appearance, even with the gaposis. Yesterday, I took a 1 mL syringe with a fine needle and filled it with dilute PVA. Then I "injected" the dilute PVA into the gaps, wiped off any excess sloppage, and sanded it down while filling the gaps with the saw dust that was being created. Repeatedly. I have a little bit more touch up to do, but I think it is working pretty well. I'll post more photos when I do a little more touch up work. I bought some danish oil (medium, what ever that means), and some stain, and will be trying these out on some scraps. Hope everyone is having a good weekend, and that all your teams are winning. Go Blue. Knocklouder, CiscoH, Oldsalt1950 and 5 others 8 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model Link to comment Share on other sites More sharing options...
HardeeHarHar Posted November 27, 2022 Author Share #9 Posted November 27, 2022 Gaps are mostly filled (I hope). Paul Le Wol, Prowler901, clearway and 8 others 9 2 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model Link to comment Share on other sites More sharing options...
Peanut6 Posted November 27, 2022 Share #10 Posted November 27, 2022 Wow HHH, that is looking very good. I can't wait to see it stained, the grain patterns of the planks should make for a really nice presentation, IMHO. AJohnson, HardeeHarHar and Knocklouder 3 Quote Take care and be safe. kev Current Build: HMS Bounty's Jolly Boat - Artesania Latina On the shelf: Oseberg #518 - Billing Boats Link to comment Share on other sites More sharing options...
HardeeHarHar Posted November 28, 2022 Author Share #11 Posted November 28, 2022 So far, not so bad… Peanut6, mgatrost, Prowler901 and 5 others 7 1 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model Link to comment Share on other sites More sharing options...
hollowneck Posted November 28, 2022 Share #12 Posted November 28, 2022 (edited) Psssst…Brian? Did you sand and oil the “keg” on your living room coffee table? If so, you’re a braver man than I!😲 The Watco Danish oil looks great. Edited November 28, 2022 by hollowneck Added text HardeeHarHar 1 Quote Ron Director, Nautical Research Guild Secretary/Newsletter Editor, Philadelphia Ship Model Society Former Member/Secretary for the Connecticut Marine Model Society Current Build: Grace & Peace (Wyoming, 6-masted Schooner) Completed Builds: HMS Grecian, HMS Sphinx (as HMS Camilla) Ongakuka Maru, (Higaki Kaisen, It Takes A Village), Le Tigre Privateer, HMS Swan, HMS Godspeed, HMS Ardent, HMS Diana, Russian brig Mercury, Elizabethan Warship Revenge, Xebec Syf'Allah, USF Confederacy, HMS Granado, USS Brig Syren Link to comment Share on other sites More sharing options...
HardeeHarHar Posted November 28, 2022 Author Share #13 Posted November 28, 2022 (edited) Heh heh heh. @hollowneck you have keen eyes! That is a table on our screened in porch in Durham. The construction has been going on inside on the breakfast nook table, but I took the sanding and staining outside. My wife/the Admiral is ridiculously tolerant and kind, and today even said she liked the Danish oil treatment on The Secret Vessel. I’m currently working on setting up an “office”/“model building” room in the house in Durham. Going to get an old drafting table and set up something to vent sawdust and fumes etc. if you have suggestions, I’d love to hear them! Edited November 28, 2022 by HardeeHarHar Knocklouder and Peanut6 1 1 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model Link to comment Share on other sites More sharing options...
hollowneck Posted November 28, 2022 Share #14 Posted November 28, 2022 (edited) I have a “ShopFox” ceiling mounted air cleaning system in the area where I make fine particle sawdust. For bigger wood particles, I use a simple ShopVac hooked up to the outlet tubes (disc sander, table saw, etc.). For “fumes’’ (like lacquer or some acrylics) I do this outside, sometimes in the garage using various sizes of throwaway cardboard boxes (my spray booths). For glue and sometimes paint fumes, I have a small desktop air filtration unit. Hope this info is useful… Edited November 28, 2022 by hollowneck Added text Peanut6 and HardeeHarHar 2 Quote Ron Director, Nautical Research Guild Secretary/Newsletter Editor, Philadelphia Ship Model Society Former Member/Secretary for the Connecticut Marine Model Society Current Build: Grace & Peace (Wyoming, 6-masted Schooner) Completed Builds: HMS Grecian, HMS Sphinx (as HMS Camilla) Ongakuka Maru, (Higaki Kaisen, It Takes A Village), Le Tigre Privateer, HMS Swan, HMS Godspeed, HMS Ardent, HMS Diana, Russian brig Mercury, Elizabethan Warship Revenge, Xebec Syf'Allah, USF Confederacy, HMS Granado, USS Brig Syren Link to comment Share on other sites More sharing options...
Knocklouder Posted November 28, 2022 Share #15 Posted November 28, 2022 Great Job!!!! You nailed it. I use a shop vac with a hepa filter and bag, works great for dust and particles, fumes not that great but for dust its great. I hook it up to everything. Peanut6, hollowneck and HardeeHarHar 3 Quote Start so you can Finish !! Finished: The Sea of Galilee Boat-Scott Miller-1:20 , Amati } Hannah Ship in a Bottle:Santa Maria : LA Pinta : La Nana : The Mayflower : Viking Ship Drakkar The King Of the Mississippi Artesania Latina 1:80 Current Build: Royal Yacht, Duchess of Kingston-Vanguard Models Link to comment Share on other sites More sharing options...
AJohnson Posted November 28, 2022 Share #16 Posted November 28, 2022 Look very good Brian, looks a nice finish to me! 👍 HardeeHarHar, Peanut6 and Knocklouder 3 Quote Andrew Current builds:- HM Gun-brig Sparkler - Vanguard (1/64) , HMAV Bounty - Caldercraft (1/64) Completed (Kits):- Vanguard Models (1/64) :- HM Cutter Trial , Nisha - Brixham trawler Caldercraft (1/64) :- HMS Orestes(Mars), HM Cutter Sherbourne Paper Shipwright (1/250) :- TSS Earnslaw, Puffer Starlight Link to comment Share on other sites More sharing options...
HardeeHarHar Posted November 28, 2022 Author Share #17 Posted November 28, 2022 5 hours ago, AJohnson said: Look very good Brian, looks a nice finish to me! 👍 Thanks Andrew! I'm trying my best!! Knocklouder, hollowneck and AJohnson 3 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model Link to comment Share on other sites More sharing options...
Peanut6 Posted November 29, 2022 Share #18 Posted November 29, 2022 Dude Ya' nailed it IMHO I can't see how it could have turned out any better Now what thoughts do you have for how you plan on using that drafting table? Knocklouder 1 Quote Take care and be safe. kev Current Build: HMS Bounty's Jolly Boat - Artesania Latina On the shelf: Oseberg #518 - Billing Boats Link to comment Share on other sites More sharing options...
HardeeHarHar Posted November 30, 2022 Author Share #19 Posted November 30, 2022 16 minutes ago, Peanut6 said: Dude Ya' nailed it IMHO I can't see how it could have turned out any better Now what thoughts do you have for how you plan on using that drafting table? Thanks Kev! You’re too kind!! The drafting table will be used as an office desk and a construction space/painting easel. It’s big! hollowneck, ccoyle, Knocklouder and 2 others 5 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model Link to comment Share on other sites More sharing options...
Peanut6 Posted November 30, 2022 Share #20 Posted November 30, 2022 Oh my, that is quite the find. Very old school and probably weighs more than a few pounds. Good for you hollowneck 1 Quote Take care and be safe. kev Current Build: HMS Bounty's Jolly Boat - Artesania Latina On the shelf: Oseberg #518 - Billing Boats Link to comment Share on other sites More sharing options...
HardeeHarHar Posted November 30, 2022 Author Share #21 Posted November 30, 2022 3 hours ago, Peanut6 said: Oh my, that is quite the find. Very old school and probably weighs more than a few pounds. Good for you Yessir, it weighs over 200 pounds. I hope it works as I am hoping. At the very least, it serves to remind me of all the architects that comprise my ancestry. It raises and lowers so I can work sitting or standing. I may have to put it to good use while writing a book, if a 2nd Edition Book is approved by Elsevier. That is gonna be a real commitment of time and effort. When not writing, I am hoping I can use it for guitar playing/ship building (and an occasional attempt at painting). I have talented painters in my family who are inspirational, but I don't seem to have inherited those particular genes....not that I let that stop me =] Knocklouder, hollowneck, Oldsalt1950 and 1 other 4 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model Link to comment Share on other sites More sharing options...
HardeeHarHar Posted November 30, 2022 Author Share #22 Posted November 30, 2022 Turret added, metal work and oars up next! Ryland Craze, AJohnson, Knocklouder and 2 others 5 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model Link to comment Share on other sites More sharing options...
Peanut6 Posted November 30, 2022 Share #23 Posted November 30, 2022 The thought that immediately comes to mind is how many people have used that table and what drawings came from it over the years. It is becoming more and more evident that you are a man of many skills. Scientist, writer, musician, hobbyist, angler and now we learn you are a painter. I suppose that leaves just one question , , , , do you do windows? Sorry, I couldn't resist. Oh, and by the way, the turret looks pretty sharp to boot! hollowneck, Knocklouder and AJohnson 3 Quote Take care and be safe. kev Current Build: HMS Bounty's Jolly Boat - Artesania Latina On the shelf: Oseberg #518 - Billing Boats Link to comment Share on other sites More sharing options...
HardeeHarHar Posted December 1, 2022 Author Share #24 Posted December 1, 2022 @Peanut6 - I never said I did any of those things well, but I keep practicing!!! I used to do leather craft when I was young, and I got very good at that. I won’t be doing much leather work, but I do hope to put the drafting table to good use in the future!!! It can even serve as a music stand too! Believe you me, I do A LOT of windows Kev. Way too many. The salt water on the coast makes it a must if you want to see thru your windows. I’d say I am not too bad at windows. 😜. p.s. Turning oars with a file is painful, time to order that lathe… Knocklouder, Peanut6, hollowneck and 1 other 1 3 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model Link to comment Share on other sites More sharing options...
Peanut6 Posted December 2, 2022 Share #25 Posted December 2, 2022 One does not have to perfect an endeavor to experience the joy and satisfaction of the practice. The key is that what ever it was, served it's purpose and you found enjoyment. IMHO a diversity of interests most definitely helps to help keep life fun and interesting. Might it be possible to use a poor man's lathe, a variable speed hand drill, to do what you need to do? That is how I turned down my stuff. Granted it may take a bit of thinking/planning to do, I have no idea what exactly you need to do but it might be a possibility. AJohnson and Knocklouder 2 Quote Take care and be safe. kev Current Build: HMS Bounty's Jolly Boat - Artesania Latina On the shelf: Oseberg #518 - Billing Boats Link to comment Share on other sites More sharing options...
HardeeHarHar Posted December 8, 2022 Author Share #26 Posted December 8, 2022 (edited) Just paddling along. Wondering how to do the rivets next… Edited December 8, 2022 by HardeeHarHar Vane, Peanut6, Prowler901 and 3 others 6 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model Link to comment Share on other sites More sharing options...
ccoyle Posted December 8, 2022 Share #27 Posted December 8, 2022 Do an internet search for scale rivets -- lots of info on how to make them yourself, plus websites that deal in aftermarket detail parts. AJohnson 1 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, Bf 109E-7/trop Link to comment Share on other sites More sharing options...
HardeeHarHar Posted December 8, 2022 Author Share #28 Posted December 8, 2022 (edited) Thanks @ccoyle, I have rivets in lots of small sizes I purchased from the web. I was thinking you just cut the rivet head off and glue it down. No drilling needed. Is that correct? Edited December 8, 2022 by HardeeHarHar AJohnson, Knocklouder and CiscoH 3 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model Link to comment Share on other sites More sharing options...
ccoyle Posted December 8, 2022 Share #29 Posted December 8, 2022 5 minutes ago, HardeeHarHar said: Is that correct? Dunno -- have never used them myself. But it sounds logical! AJohnson and HardeeHarHar 1 1 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, Bf 109E-7/trop Link to comment Share on other sites More sharing options...
HardeeHarHar Posted January 28, 2023 Author Share #30 Posted January 28, 2023 (edited) Brian the Riveter: 1) Enlarge hole 2) Cut heads of rivers 3). Glue em 4). Blacken them or not? Edited January 28, 2023 by HardeeHarHar Prowler901, AJohnson, Peanut6 and 1 other 3 1 Quote Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.