tlevine Posted June 21 Author Share #61 Posted June 21 Thanks, Chris. Canute and robert952 2 Quote Toni Chairman Nautical Research Guild Member Nautical Research and Model Society Member Midwest Model Shipwrights Current Builds: Utrecht-1742 Completed Builds: Longboat - 1:48 scale HMS Atalanta-1775 - 1:48 scale Half Hull Planking Project Capstan Project Swallow 1779 - 1:48 scale Echo Cross Section NRG Rigging Project Utrecht-1742 Gallery: Hannah - 1:36 scale. Link to comment Share on other sites More sharing options...
TBlack Posted June 21 Share #62 Posted June 21 As I’ve mentioned before, Toni’s explanations are complete and easy to follow. But there’s more: she has also instructed us in the correct terms for the various parts. Thank you, Toni! KentM, PaddyO, rcweir and 5 others 8 Quote Link to comment Share on other sites More sharing options...
Canute Posted June 24 Share #63 Posted June 24 That she has. I've heard the names/words before, but now I know where they go. Thanks a bunch, Toni. KentM and robert952 2 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild Link to comment Share on other sites More sharing options...
ChuckCHS Posted June 28 Share #64 Posted June 28 I've just purchased this amazing teaching tool. Should arive in just a few days. Just wondering if others have done the same. Chuck Canute, tlevine, robert952 and 1 other 4 Quote Link to comment Share on other sites More sharing options...
ferretmary1 Posted June 28 Share #65 Posted June 28 17 people have purchased the kit so far (including you). Yours was shipped out less than an hour ago. Have fun with the build! Mary robert952, BenD, Ryland Craze and 3 others 6 Quote Mary Van Dahm Link to comment Share on other sites More sharing options...
ChuckCHS Posted June 30 Share #66 Posted June 30 Thanks Mary..... PO says it's to be delivered Monday the 1st. Very quick and much appreciated. One question though......you maybe the wrong person to ask....but how do I have the NRG logo attached to my name and responses. Regards Chuck Canute and robert952 2 Quote Link to comment Share on other sites More sharing options...
ferretmary1 Posted June 30 Share #67 Posted June 30 I have to send your name in to Jim Hatch and he puts them up. I did that just now, so you should see your logo soon. 😁 Canute and robert952 2 Quote Mary Van Dahm Link to comment Share on other sites More sharing options...
Chuck Seiler Posted July 13 Share #68 Posted July 13 The San Diego Ship Modelers Guild and Beer Drinking Team will be taking this on as a community build. I think we have 12 folks diving in. tlevine, modeller_masa, BenD and 5 others 6 2 Quote Chuck Seiler San Diego Ship Modelers Guild Nautical Research Guild Current Build:: Colonial Schooner SULTANA (scratch from Model Expo Plans), Hanseatic Cog Wutender Hund, Pinas Cross Section Completed: Missouri Riverboat FAR WEST (1876) Scratch, 1776 Gunboat PHILADELPHIA (Scratch), John Smith Shallop Link to comment Share on other sites More sharing options...
tmj Posted July 13 Share #69 Posted July 13 1 hour ago, Chuck Seiler said: The San Diego Ship Modelers Guild and Beer Drinking Team will be taking this on as a community build. I think we have 12 folks diving in. It funny you say that, Chuck. It just so happens that the 'Beer Drinking Guild' that I belong to recently took up model ship building! tlevine, robert952, Canute and 2 others 3 2 Quote "The journey of a thousand miles is only the beginning of a thousand journeys!" Current Build; 1776 Gunboat Philadelphia, Navy-Board Style, Scratch Build 1:24 Scale On the Drawing Board; 1777 Continental Frigate 'Hancock', Scratch Build, Admiralty/Pseudo Hahn Style, "In work, active in CAD design stage!" In dry dock; Scratch Build of USS Constitution... on hold until further notice, if any. Constructro 'Cutty Sark' ... Hull completed, awaiting historically accurate modifications to the deck, deck houses, etc., "Gathering Dust!" Corel HMS Victory Cross Section kit "BASH"... being neglected! Link to comment Share on other sites More sharing options...
MDZ Posted July 20 Share #70 Posted July 20 Great project. I am a newbi (did 3 models ) I purchased the rigging project and started to make the hull. I could not get evenly sized planks for deck and exterior. For the exterior I used 1/16 by 1/4 planks had and for the deck, I made a jig with bras(1/4 inch sq tubing and 1/4 flat) to hold and cult the 1/16 sheet stock. The I cound not makr the channels by gluing (3) 1/6 sheets together ( they would not stay together so I used a painters stirr stck and a 1/16 flst stock to make the channel. The pins were a good idea. I was looking to see if someone could suggest a better way to cut planks evenly. The hull is being taped and stained (see pic) and also a pic of the jig i made. Canute and robert952 2 Quote Link to comment Share on other sites More sharing options...
ferretmary1 Posted July 20 Share #71 Posted July 20 Toni is at the IPMS conference in Wisconsin this weekend. I'll make sure she sees your question when she gets back. We have a saw jig that is available, but if you are cutting the wood manually, toni would probably have some better suggestions than I can offer. Mary Canute and robert952 2 Quote Mary Van Dahm Link to comment Share on other sites More sharing options...
tlevine Posted July 25 Author Share #72 Posted July 25 Although I cut my planks on a table saw, these planks can easily be cut by using a straight edge (aka steel ruler) and an Exacto knife. It isn't critical to have these planks exactly the same width. robert952, Canute and ferretmary1 2 1 Quote Toni Chairman Nautical Research Guild Member Nautical Research and Model Society Member Midwest Model Shipwrights Current Builds: Utrecht-1742 Completed Builds: Longboat - 1:48 scale HMS Atalanta-1775 - 1:48 scale Half Hull Planking Project Capstan Project Swallow 1779 - 1:48 scale Echo Cross Section NRG Rigging Project Utrecht-1742 Gallery: Hannah - 1:36 scale. Link to comment Share on other sites More sharing options...
Kevin Posted July 28 Share #73 Posted July 28 what a wonderful kit, i have always made the Catharpins look messy ferretmary1, robert952 and Canute 3 Quote Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 Belle Poule 1834 by Kevin - OcCre - 1/90 - French frigate - started June 2024 - - On hold MHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished Hercules by Kevin - OcCre - 1/50 - Tugboat - Finished - May 2024 Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat Link to comment Share on other sites More sharing options...
MDZ Posted August 7 Share #74 Posted August 7 Are there videos or step by step instructions on the cross sizing and round sizing. Are there any tools to do these. ? Canute and robert952 2 Quote Link to comment Share on other sites More sharing options...
ferretmary1 Posted August 7 Share #75 Posted August 7 When you buy the kit, we send you a 124 page PDF monograph with step-by-step instructions. Toni's instructions are very detailed. Mary NRG Office manger robert952 and Canute 2 Quote Mary Van Dahm Link to comment Share on other sites More sharing options...
bdgiantman2 Posted August 7 Share #76 Posted August 7 (edited) 1 hour ago, MDZ said: Are there videos or step by step instructions on the cross sizing and round sizing. Are there any tools to do these. ? You can try also making a stub mast on a spare flat piece of wood and practice the sizing that way. Archjofo has very good pictures how he does sizing with descriptive articles as well. Edited August 7 by bdgiantman2 Canute, ferretmary1 and robert952 3 Quote Link to comment Share on other sites More sharing options...
Nemovir Posted September 13 Share #77 Posted September 13 I would love to see video presentation of this and other projects. PaddyO, Canute and robert952 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.