mitbok Posted July 8 Share #1 Posted July 8 There is a lot with the saw on Ebay (with sliding table and some add ons). It is already $1,200.00 ! Earlier, a brand new, packed saw with all bells and whistles sold for $4,250.00 !!! All I can say is - hold on to your saws if you have them, apparently they are very hot item. Nirvana, Archi, Ryland Craze and 1 other 1 3 Link to comment Share on other sites More sharing options...
Nirvana Posted July 9 Share #2 Posted July 9 7 hours ago, mitbok said: There is a lot with the saw on Ebay (with sliding table and some add ons). It is already $1,200.00 ! Earlier, a brand new, packed saw with all bells and whistles sold for $4,250.00 !!! All I can say is - hold on to your saws if you have them, apparently they are very hot item. As the 1200 dollar unit it is still another 8 days until last day. Will be interesting to see the final cost. Bought mine via our sell and buy section with alot of accessories, and only 80 dollars shipping. This only three years ago. mtaylor and Ryland Craze 2 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry Link to comment Share on other sites More sharing options...
mitbok Posted July 9 Author Share #3 Posted July 9 The one that sold for 4K was full package purchased from Jim few years ago and cost the seller just over $1,200. It wasn't just the saw alone. But still, its sold like a collectible! Lesson learned - if there is something good made by a single guy or "mom n pap" business, buy it while you can. Ryland Craze and mtaylor 2 Link to comment Share on other sites More sharing options...
mtdoramike Posted July 9 Share #4 Posted July 9 No, it's more like stupid people on ebay bidding up an item and not know what it is, but they just have to have it. Ronald-V, toms10 and mtaylor 3 Link to comment Share on other sites More sharing options...
GGibson Posted July 9 Share #5 Posted July 9 On 7/8/2024 at 12:56 PM, mitbok said: There is a lot with the saw on Ebay (with sliding table and some add ons). It is already $1,200.00 ! Earlier, a brand new, packed saw with all bells and whistles sold for $4,250.00 !!! All I can say is - hold on to your saws if you have them, apparently they are very hot item. 20 hours ago, Nirvana said: As the 1200 dollar unit it is still another 8 days until last day. Will be interesting to see the final cost. This latest one started at $1,200. And yes, like the first one that ended up at $4,250, you won't see hardly any action on it until just hours before it closes. I was watching the bidding on that first one and, within a couple hours of the closing, bids were still at a "reasonable" $1,500. Then two or three bidders got into a bidding tussle and.... boom. <shrug> mtaylor 1 Gregg Current Projects: Completed Projects: Waiting for Shipyard Clearance: Santa Maria Caravelle 1:48 - Ships of Pavel Nikitin Norwegian Sailing Pram 1:12 - Model Shipways Yacht America Schooner 1851 1:64 - Model Shipways Muscongus Bay Lobster Smack 1:24 - Model Shipways RMS Titanic 1:300 - OcCre (Couldn't help myself when it was on sale) H.M. Schooner Ballahoo 1:64 - Caldercraft USS Constitution 1:76 - Model Shipways Bluenose 1921 1:64 - Model Shipways Link to comment Share on other sites More sharing options...
mitbok Posted July 9 Author Share #6 Posted July 9 If it is not relisted than some one did pay over 4K. Chances are that person knows what he is getting. Some people use it for business and it could make sense for them financially. mtaylor 1 Link to comment Share on other sites More sharing options...
Landlubber Mike Posted July 9 Share #7 Posted July 9 Law of supply and demand... People use them in other hobbies besides model ship building. With nothing comparable on the market, I can see how these are getting bid up. mtaylor and thibaultron 2 Mike Current Wooden builds: Amati/Victory Pegasus MS Charles W. Morgan Euromodel La Renommèe Plastic builds: Hs129B-2 1/48 SB2U-1 Vindicator 1/48 Five Star Yaeyama 1/700 Pit Road Asashio and Akashi 1/700 diorama Walrus 1/48 and Albatross 1/700 Special Hobby Buffalo 1/32 IJN Notoro 1/700 Akitsu Maru 1/700 Completed builds : Caldercraft Brig Badger Amati Hannah - Ship in Bottle Pit Road Hatsuzakura 1/700 Hasegawa Shimakaze 1:350 F4B-4 and P-6E 1/72 Accurate Miniatures F3F-1/F3F-2 1/48 Tamiya F4F-4 Wildcat built as FM-1 1/48 Special Hobby Buffalo 1/48 Eduard Sikorsky JRS-1 1/72 Citroen 2CV 1/24 - Airfix and Tamiya Entex Morgan 3-wheeler 1/16 Terminated build: HMS Lyme (based on Corel Unicorn) On the shelf: Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits Future potential scratch builds: HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans) Link to comment Share on other sites More sharing options...
tmj Posted July 9 Share #8 Posted July 9 I personally smell fraud and scams. "Buyer beware!" mtaylor 1 "The journey of a thousand miles is only the beginning of a thousand journeys!" Current Build; 1776 Gunboat Philadelphia, Navy-Board Style, Scratch Build 1:24 Scale On the Drawing Board; 1777 Continental Frigate 'Hancock', Scratch Build, Admiralty/Pseudo Hahn Style, "In work, active in CAD design stage!" In dry dock; Scratch Build of USS Constitution... on hold until further notice, if any. Constructro 'Cutty Sark' ... Hull completed, awaiting historically accurate modifications to the deck, deck houses, etc., "Gathering Dust!" Corel HMS Victory Cross Section kit "BASH"... being neglected! Link to comment Share on other sites More sharing options...
Nirvana Posted July 16 Share #9 Posted July 16 Currently bid 1250 dollars - four days to go. thibaultron, Canute, Ryland Craze and 1 other 4 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry Link to comment Share on other sites More sharing options...
bigcreekdad Posted July 29 Share #10 Posted July 29 (edited) Wow..I am unlikely to try another scratch build and was thinking of selling my Jim saw and thickness sander. No idea what to ask. I mean his equipment is definitely top notch, but $1500 just for the saw? Edited July 29 by bigcreekdad mtaylor, Ryland Craze, Nirvana and 1 other 4 Link to comment Share on other sites More sharing options...
bigcreekdad Posted July 30 Share #11 Posted July 30 If I sell them, I really don't want to ship. if possible. Have a few past bad experiences with heavy mechanical/electronics stuff. 'd be willing to drive a radius of 100 mikes from Toledo, Ohio to meet a buyer. Nirvana, mtaylor, Ryland Craze and 1 other 4 Link to comment Share on other sites More sharing options...
Recommended Posts