Canute

Canute's Carving with hand tools

Well, here goes. I've assembled some cutting tools and the carving blanks. Glued the rough blank to a piece of poplar I had and had it sit over night under some weights. Set up nice and flat.

post-15839-0-49587700-1478619645.jpg

Downloaded the carving diagram so I could add the stop cuts, too.

 

Weapons of choice:

post-15839-0-83519300-1478619653.jpg

I've got a scalpel with #11 blade, an Excel # 11 blade, a 1" carving knife and a small micro chisel.

 

I added the stop cuts on the blank, working under my magnifier lamp. May switch to my Optivisor for this delicate work. Felt I was too hunched over, working under the lamp.

 

Share this post


Link to post
Share on other sites

Have a Sheep's Foot blade on my Stock mans pocket knife that looks like your 1" carving knife, use it often because it is very handy for carving and making groves with the tip, also works well for digging splinters and other things out of your hide. Keep it sharp and don't take to large of a cut and control should be good. Been carrying a stock mans knife with that type of blade since I learned the short comings of my Boy Scout knife as a kid. Enjoy your new developing carving skills. A look at a good leather tooling guide should help in learning depth techniques and decorative curved cuts on uncarved areas.

jud

Share this post


Link to post
Share on other sites

Ken, my guess is that you are a 'lefty'.

The way you put your carving tools down B)  B)

How are you coming along with the carving?

 

Don't understand the observation !  I am right-handed and the way the knives are depicted in Ken's photo is the way I lay my knives down with the blade pointing away from my hand.  A leftie would presumably point the blades to the right away from his/her left hand.  When you reach for the knife you don't want to accidentally grab the sharp blade with your hand or worse stab yourself in the hand reaching for the knife..

Share this post


Link to post
Share on other sites

Sherlock, I am a righty from birth. :) I learned to respect edged tooled from Cub Scouts. They are normally parked in a rack, so I can pick one up without slicing away anymore parts of my fingers and hands. ;)  I've had a couple over my checkered hobby career. As Mark Taylor says, I've put my DNA on a few of my builds. :rolleyes:

 

I've dabbled with my #11 and the scalpel, but I've ordered a new carving knife from out west, per Jack's recommendation. So I wait and read and watch some Youtube vids on this carving activity. ^_^

CaptainSteve, mtaylor and Modeler12 like this

Share this post


Link to post
Share on other sites

Sorry, it was not important. I was just curious how Ken was coming along with his carving.

 

I am also right handed and when I put my knife down on the table, the sharp edge of the blade is usually pointing to the left.

Ken's were facing the other direction.

Perhaps that is why Ken was having trouble with the #11 blade B)  B)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.