Jump to content
MSW Spring Donation Drive

James H

Administrators
 View Profile  See their activity

  • Posts

    5,512

  • Joined

  • Last visited

 Content Type 

Everything posted by James H

  1. James H
    Spent all day adding shrouds. Always the most sweary day in my workshop.
  2. James H
  3. James H
    Masts built and installed and rig is about to start. I'll not be making another update in here until this one is complete. Hoping for a couple of weeks until finished.
  4. James H
    That's my assessment too.
  5. James H
    There you go:
  6. James H
    Hi Bradley, It's already quite heavy and I've only got as far as installing the lower gun deck, sans details. The hull itself is perfectly workable in terms of manhandling for sanding and planking, for its size. It will of course get much heavier, but I intend to plank this whilst led on my bench. There's no other way really. When I finally sand it, I'll do that outside with a thick towel on the floor on which I'll prop the model whilst I work.
  7. James H
    I think it's fair to say it should be black, or even a bottle green (sure I read that somewhere). The reason it was kept in pear was for aesthetics.
  8. James H
    Using the Amati tool is something you need to learn. I usually lean it on a finger so the pin lies against the inner wall, then work from there. Hard to believe this is your first time at planking. That is beautifully neat.
  9. James H
    No, those were missing in mine too. I've informed @cafmodel and they are sending them over.
  10. James H
    At this rate, planking will be done in a couple of days 🤣 Good to see the bulwarks site on well on the faired bulkheads.
  11. James H
    I can't believe how quickly you've progressed with this. What are those beams made from? Are those suggested or your own idea?
  12. James H
    That's coming along swimmingly. You're right about that stern. I prefer it to the Fifie in shape, but the trade off is Fifie is a tad easier to plank, although Zulu is also easy to do.
  13. James H
    That's actually a reasonable price these days. 38mm thick, 90mm across and 1.3m long. As for the dust being toxic, it's best to regard all wood dust as toxic. Don't inhale any of it.
  14. James H
    I built the Amati Santa Maria about 20yrs ago, being roughly the same shape. Loved that kit, and found the planking quite easy. You'll probably find thee same with Coca. Nice start and lovely photos too.
  15. James H
    Looks like you're having a blast with this one. I found it a thoroughly enjoyable build.
  16. James H
    I hope you enjoy this as much as I did with the prototype. Certainly watching this.
  17. James H
    There was a problem with the non-MDF sheets and the quality of them. Amati are currently sorting this out and I expect the replacements to be with me in a few weeks. That should hopefully coincide with my current project ending too. I know what you mean though. Looking forward to getting back the behemoth!
  18. James H
    I don’t really know. I suppose I’ll find out when I start it 🤣
  19. James H
    Yes, just tuck those ropes in and drip a little thinned white glue in there to set them.
  20. James H
    I agree. Defo love to see someone take up this offer and complete with a build log.
  21. James H
    Come on.....open a build log for Zulu. I know a few here would love to see it. As for Flirt, exactly the same. Share your journey and let us see how you progress. If you've ever any questions, I'm sure you'll get lots of help here and both I and Chris can nail down any specifics with these builds.
  22. James H
    I usually put smalls dots all the way along and then ease the plank into place a couple of inches at a time and then hold it for 5-10 seconds before moving along. No tape, nails, nothing needed. Also no accelerator. The CA gel stays viable for the duration without needing to add spots at intervals. Glad you like the build log and I hope the manual I did is easy enough to follow. Oh, and
  23. James H
    I'd be paranoid about not getting all those metal parts exactly the same. Well done if you managed that!
  24. James H
    Really looking forward to this one, and I plan to start this around the end of October, when my current project is complete.
  25. James H
    Outstanding, and I'm learning a whole lot of new tricks for when I progress with Victory

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...