Jump to content
NRG Photographic Model Ship Competition - All eligible to enter - Reduced memberhsip fee - JULY 31 ENTRY DEADLINE ×

72Nova

Members
 View Profile  See their activity

  • Posts

    625

  • Joined

  • Last visited

 Content Type 

Everything posted by 72Nova

  1. 72Nova
    Nice work👍, love that model. I toured the San Salvador when it was about 2 thirds completed, I was in awe then when it was just in the construction stage and now since it's completion the rigging can provide a wealth of information. Looking forward on your progress Jeff. Michael D.
  2. 72Nova
    I spent some today and made up the rope ladder for the fore mast, using 0.30mm line for the rope and .30" rod for the rungs, without spending an eternity knotting the rope around each rung I simply CA glued them and I think the overall effect is not too bad. Michael D.
  3. 72Nova
    I added an additional martnet to the fore sail and swapped the single for a double block at the mast head, looks much better and started rigging the vangs. I also mocked up a martnet on the leech of the main sail and while it looks like it belongs I'm not so sure It's correct though since martnets on square sail ships were superseded by leech lines around 1650, but unsure about Galley's?, I'll ponder this for awhile as I focus on other areas of the build. Michael D.
  4. 72Nova
    Glad you were able to remove those channels without too much damage and nice solution on the lids👍 Michael D.
  5. 72Nova
    Yes Kirill I did position the yards on different sides, as for the line you're asking what it's for, obviously when the sail is set it would be vertical, the block tied to the clew and I can only assume to help assist the only foot brail when furling which doesn't make sense for a sail that big, one would think there be more and what about the main sail?, I need to think this one out and maybe use my own artistic license on this. I might rig it like the last picture and add either a peak brail or martnet to the back of the sail, thank you for the picture Kirill they help out a lot my friend!. Michael D.
  6. 72Nova
    So you're using an iron transfer sheet?, onto what fabric?, and then coating it with varnish?, is that correct Kirill?, they do look amazing!! Michael D.
  7. 72Nova
    A tricky situation for sure Bill, I would scribe the mating surface between the channel and hull multiple times with a sharp blade/blades to separate the channel. Michael D.
  8. 72Nova
    Bill, Here's what it looks like when I swap the starboard mizen channel to port. Michael D.
  9. 72Nova
    Right now just my makeshift building booth out of corplas sides and painters plastic for the top that drapes down in front to keep the dust out, nothing high tech here and very soon I will need to build a display case for her. Michael D.
  10. 72Nova
    Thank you for the compliments gentlemen, Kirill I represented the martnets as seen on this model which is only rigged on one side, as for the block at the main mast top that is also visible in the picture, that would be one of the brails for the fore lateen sail, not the sheets as I indicated...my mistake and may have to redo. In post #135 I did show a mock up of the sheet line. Michael D.
  11. 72Nova
    Thanks for the heads up on the davit Bill, you got me thinking on the lanyards so I did a mock up, part 173 is port and 170 is starboard as illustrated and they look to be ok at almost a vertical position. When I reverse them they look like yours, unless you have by chance the mast seated incorrectly, I'd remove the channels and switch them. Michael D.
  12. 72Nova
    Looks marvelous Kirill you should be very proud and will you be building a case for her also?. All the best! Michael D.
  13. 72Nova
    She's looking good Bill, maybe they are on backwards?, hope to start mine in the coming months. Michael D.
  14. 72Nova
    I'm just about finished with the fore sail rigging, I added more detail by rigging the marnets, not looking too bad. Michael D.
  15. 72Nova
    One more small update, I decided to display the fore sheet line and while it may not be practical once the sail is furled, I do like the added detail. Michael D.
  16. 72Nova
    Well work continues on the fore mast and yard, shrouds are completed along with the parrels, the tackle for the parrels are hooked to the 1st shroud chain and led through a tackle block and single and tied at the chain. The bow line is finished as well as the braces. Up next are the fore stays and vangs. Michael D.
  17. 72Nova
    Coming along nicely Maurice, regarding post 1532 is that the filament/fake nails so to speak you talked about earlier sticking out between the frames? Michael D.
  18. 72Nova
    Kirill, She's getting closer for launch, you do plan on adding gun port lid ropes? Michael D
  19. 72Nova
    Thank you Kirill, I'll need it. I have the lifts for the fore yard completed, however made one mistake that I did not notice until after the lift ropes were tied and seized, I made a single block instead of a double....arrrrgggg!!, I contemplated redoing it, but the extra effort would be negotiable in appearance so I proceeded and made it look like a long tackle block and actually looks fine. The tackle lines are tied to rope on the fake tackle block and are led through a 4 sheave block and belayed to cleats in the middle deck aft of the main mast. Michael D.
  20. 72Nova
    I completed the furling of the Fore sail, have the parrels in place, up next will be rigging the lifts/tackle, the tackle for the parrels and then the shrouds, she's starting take shape. Michael D.
  21. 72Nova
    Kirill I like that added detail of the frames a lot!👍 Michael D.
  22. 72Nova
    It's nice to finally see an end to a long term project and sad too, at least that's how it was for me and Victory. I pretty much treat my thread the same way Kirill, I run it through my fingers with diluted PVA glue and let hang/stretch for a bit then twist and it seems to hold and honestly at this scale your technique makes the lines so much better, one would be hard pressed to really notice much of a difference then if made on a rope walk. Well done Sir!👍 Michael D.
  23. 72Nova
    The Davits on the starboard side are completed and will need to scratch build the port side ones. Michael D.
  24. 72Nova
    Thanks for that link Marc, that model looks wonderful, what I find interesting though with all the modifications is it appears the railings were left untouched as they do no represent the railings on the ship and museum model, also the addition of the ladders on each side for which the ship and model lack. I doubt I will be making new masts and yards unless they are so grossly off. Unfortunately scale decks does not offer wood decks for this kit, but my hopes are high after speaking with John as they would like too, I need to email him with some info. Michael D.
  25. 72Nova
    Thank you gentlemen. You're right about the blocks Kirill, I'm confident the 2mm - 3mm blocks will suffice for deck, lower course maybe top mast rigging, but for everything higher up and spritsail area I will need to fabricate my own blocks/hearts. Regarding the Reale I read when the sails are furled in war time the yards are made safe to the mast with chain, would you have any illustrations of this in your vast library Kirill?. Michael D.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...