Jump to content

JeffT

NRG Member
  • Posts

    2,503
  • Joined

  • Last visited

Everything posted by JeffT

  1. Hello and welcome to Model Ship World
  2. Hello Ronald, welcome to MSW 🙂
  3. Welcome to MSW
  4. I have this one and can't live without it.
  5. Hello and Welcome to MSW
  6. Welcome to MSW
  7. Hello and welcome to MSW
  8. Hello and welcome to MSW
  9. Hello Robert. Welcome to MSW.
  10. Hello and Welcome to MSW
  11. All glued up and ready for fairing. As before, I waited until the keel was set into position before gluing the transom in place, Its easier to square it with the 12th frame. I was a little over zealous with the fairing last time I think, so I'll need to pull back on the reins a little to keep from over sanding. Particularly where the transom and the frames join the keel..
  12. Hello and welcome to MSW 🙂
  13. Hello and welcome to MSW
  14. Finished up the 3 guns at the starboard bow, the pin racks and also installed some cleats. There were no cleats included with the kit for some reason. The ones I used are some I bought from model expo a few years ago. I'm going to jump over to my medway longboat for a bit and then work on the port side bow guns. The belaying pin racks have to be scratch built as once again there aren't any parts in the kit. I put little metal pins in the racks to help secure them to the model. I was worried that they would fall off.
  15. Been waiting for the amati version. Caldercrafts is a good one though if you can't wait.
  16. Hi Jim and welcome to MSW
  17. Welcome to MSW
  18. Hell and welcome to MSW
  19. Hello Erik. Welcome to MSW
×
×
  • Create New...