Jump to content

flying_dutchman2

Members
 View Profile  See their activity

  • Posts

    1,730

  • Joined

  • Last visited

 Content Type 

Everything posted by flying_dutchman2

  1. flying_dutchman2
    Kees, You are back. Beautiful job on the deck. I like how the planks are different shades of brown which looks more realistic. Marcus
  2. flying_dutchman2
    Marked on both sides of the bulkheads where the different decks go. Deck templates. I have a lot of this veneer so I used it to create the deck templates. In the end I may use them and then just cover them with planking. Slowly shaping the stern. Getting the right shape is a slow process. Don't want to muck it up. I'll do the same for the bow. Marcus
  3. flying_dutchman2
    Very technical and interesting explanation, wefalck Marcus
  4. flying_dutchman2
    Thanks for all the likes and answers to my questions. Did some preliminary sanding especially the Stern and the bow. I want to get a visual of the curvature of both and with some sanding I can get that. Stern and bow. Next I made templates of scrap wood for the bow. One piece for the X axis and one piece for the Y axis. The empty spaces will be filled with balsa. Did the same for the Stern but only for the Y axis and will be filled with balsa and sanded to get the curve Next took the individual paper templates, one for each bulkhead, lined them up, clamped them to each bulkhead. Now I can mark where all the decks go. Marcus
  5. flying_dutchman2
    Agreed with everyone else, the details are wonderful. Love all the details you put into the model to make it come alive. Marcus
  6. flying_dutchman2
    Looking great. The lines of the hull are pleasing to the eye. You did a great job in planking. Marcus
  7. flying_dutchman2
    Unconventional method of figuring out where the decks go on each of the bulkheads. Took the longitudinal lines plan, divided the plan into 38mm by 38mm squares and colored in some key areas. The decks are colored green. Created cardboard templates from each bulkhead. Y which are the numbers on the bottom of the plan and is from 0 to 100 (left to right) and X which are the numbers on the plan on the right side and is from 0 to 35 (bottom to the top). Lined up template for bulkhead 75 where Y is 75 and X is 10 and marked on the template where the deck intersects at these points. Once all created the paper templates are transferred to bulkheads and with pencil mark where each part of the deck goes. Hope you understand what I am trying to explain. I do everything using math when building a ship. Marcus
  8. flying_dutchman2
    Jan, You are correct about the anchors, 4 total on plan 4b. I wonder do they have them all on the bow ready for use or like you said, keep them as spares. The plan shows four anchors, if their are spares there would be more than four. I just checked the pictures of the Zeehaen in the book and it has 2 anchors on each side. Don't know which ones are which and does it really matter. Marcus
  9. flying_dutchman2
    All bulkheads and spacers have been glued together. All bulkheads have been reinforced with extra wood. I have spent a considerable time copying some of the plans at twice the size and then with a glue stick putting them together. Paper template of each bulkhead so I can figure out how to place the decks. I will make a notch on the inside of the bulkheads. Question : Three types of anchors x 2 total of 6. Where do I place all of them? It's going to be crowded at the bow. Marcus
  10. flying_dutchman2
    Jack, Looks great and I like the color combination of blue and yellow. Marcus
  11. flying_dutchman2
    Nils, Beautiful lines of this small boat. Looking forward in following your build and observing your attention to the details. Some of the rigging is similar to the Dutch coastal vessels. Marcus
  12. flying_dutchman2
    Glued the balsa spacers in between the bulkheads. Started this am with glueing 2 bulkheads and 2 balsa spacers. Once the glue was dry, glued the two's together and ended up with 4 large pieces. Glued again the pieces together which resulted I 2 large pieces which I will put tomorrow together Marcus
  13. flying_dutchman2
    Beautifully executed!! This is a slick looking ship. The lines are just beautiful. I like the start of your miniature maritime museum. You will never run out of space like some of us with displaying your ships Marcus
  14. flying_dutchman2
    Belt sanded balsa blocks which are all 34mm wide and fit in between the bulkheads. I inherited this monstrosity from a cabinet maker. If I don't watch what I am doing the wood disappears in no time :-) Balsa spacers in between the bulkheads. Added a notch on top of the bulkheads so they are all aligned with each other. Something I have not done before and it helps in keeping the bulkheads in a straight line. Started glueing the bulkheads to the balsa spacers Marcus
  15. flying_dutchman2
    Put all the bulkheads in a wooden clamp with computer foam in between them. This setup will give me an idea of the forms of the fluit. Side view Stern view Bow view The foam will be replaced with balsa. All the balsa will be 34mm long between each bulkhead and that is what is next. Creating the transom and where the tiller goes into the ship is going to be a difficult exercise. I am not so worried about the bow. When I build a ship the most difficult areas are the bow and the stern Marcus
  16. flying_dutchman2
    Patrick, Big hull it is. Big boat overall. I am thinking it should be easier to built than a smaller scale. Marcus
  17. flying_dutchman2
    Kees, Thanks. This is going to be a frustrating built and that will be a challenge. Especially the bending of the wood Marcus
  18. flying_dutchman2
    Finished rough cutting the 20 bulkheads out of 5mm thick Baltic birch. They will be carefully sanded to a width of around 8mm. The keel is in 2 pieces and will use N. Witsen book, the one Ab Hoving translated, to create this. Been looking through that same book and will use many of the examples in creating the various items for the fluit. This is a great way for me to learn how Dutch ships were built in the 17th century. Marcus
  19. flying_dutchman2
    Jan, I will keep you that in mind. Marcus
  20. flying_dutchman2
    It will be slow going as Spring, Summer and Fall, I spent most of my time outside except on rainy days. Marcus
  21. flying_dutchman2
    Thanks for the interest and following the build Marcus
  22. flying_dutchman2
    Cog, Agreed on the planking of the hull. I have checked some Euro sites and people that build the Fluit say that they have/had problems. Some gave up and others completed the model. There will be lots of bending of planks in very different curvatures. I am looking forward to this challenge and will complete the Zeehaen, to whatever it takes Marcus
  23. flying_dutchman2
    Started a new build of the Fluit, the Zeehaen Marcus
  24. flying_dutchman2
    Welcome Patrick, This will be a very interesting model to build. Marcus
  25. flying_dutchman2
    Titlle - The ships of Abel Tasman. Author - Ab Hoving Plans - Cor Emke The book incldes detailed information about the voyages, many pictures of the two ships as models and various paintings, detailed instructions of how the models are build whicth is the "shell-first" method, and an appendix of all the dimensions of the parts that make the models. Detailed plans (21 sheets) of both ships in the scale of 1:75. CD-Rom has all the plans in the following scale. 1:50, 1:87. 5, 1:100, and 1:150. It also contains all the pictures in the book. The Build The paper plans are in the scale of 1:75. I am going to double the scale to 1:37.5 and the reason for this is that I want to built a large ship with lots of details. I have built many small Dutch vessels, so I am due for a big one. I took the body plans of the Fluit and copied them at twice the size on the printer. Made 12 templates and added another 8 so that I have a total of 20. There is a bulkhead every 38mm. Took some computer Styrofoam and cut two long rectangular pieces from it. Made a slit every 38mm and slipped the templates in there designated slots, from #5 to #95. Looking at all the bulkheads in a row gives me a good idea of the lines of the Fluit. These are extra steps and works for me. I did this as well with the Boyer and that ship came out great. Used quarter inch ply and drew each template on the wood. Next step will be to cut out the frames with the scroll saw. Thank you for reading all of this Marcus

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...