KORTES

I made hinges. Shim brass – 0.2 mm.

In the process of making the doors of the deck-house.

Schynlicht.

My honorable colleagues.

While I was pondering over whether or not make the deck-house removable, I made some small pieces. Windows of the deck-house.

Dear Сolleagues  I’m very touched by your attention to my work.

My best regards,

Alexander.

Assembly.

I haven’t installed the deck-house on its place, I still have to cut the doorways.

Finishing covering of the deck-house. The rods were bent dry.

Сalking of the joints of the finishing covering of the deck-house roof had to be made out of thin rods of black hornbeam. Since the bending had to be made in place, the former technology was not suitable.

 I assembled deck. Fitting.

Draft covering. I formed surface.

I made “slipway” for the shaping of deck flooring of the state cabin.
According to dutch tradition – total absence of straight lines. 

Thank you very much.

20 minutes ago, druxey said:

Very pleasing additions to your model!

Thank you very much, dear druxey.

21 minutes ago, DORIS said:

Beautiful carvings, your work is very inspirational and neat. Thank you for sharing wit us.

Best regards,
Doris

Thank you very much Doris.

for Your attention to my work, it so pleasant to hear such kind words form The Professional of Your level.

My best regards.

I am continuing working on decoration.

Had a bit of practice in carving.

Installed Beretand. Fitted Kluisbord.

7 hours ago, druxey said:

I agree with Wefalck: it's risky cutting mouldings already in place, unless one is very bold! Beautiful work, Kortes.

Dear Wefalck and druxey.  In the majority of cases it is risky, but in this particular case I was sure that it could be done. 

My best regards.

12 hours ago, KORTES said:

Thank you very much, dear Dave and Marcus.

Dear Dave .

Thank you very much for Your concern. But i have several ideas regarding this point, I think I won't use white stripes.

“Moldings” were refined already after being on place.

Strykklamp.

Refining after installing bilge boards.

And “moldings” on rubbing strips.

Assembled and installed certain pieces.

Slemdhout.

Thank you very much Valeriy.

I solder with an ordinary solder, i bouught it in radio-store.

I wanted to use only steel, for more authenticity, and as you have probably noticed already all big element were made from nails of different caliber and iron plates. But i think i won't be able to do without latten in the future.

I would like to express my admiration of Your soldering skills, I'm a freshman compared to You.

Respectfully yours.

Thank you very much, dear Dave and Marcus.

I soldered using the general solder and  soldering acid.

.

My greetings, dear Carl,

Unfortunately not speaking the language can lead sometimes to certain inaccuracy, I'm very grateful for your corrections.

In naming the elements I turn to this draft.