-
Posts
1,500 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Posts posted by Mahuna
-
-
10 minutes ago, Bojeta said:
Hello,
Love the project! My great grandparents were from County Mayo, Ireland, and sailed from Liverpool to New Orleans in 1848 to escape the Great Hunger. Are you creating a CAD model of the ship? If so, would it be something you would be selling for those who would like to 3D print a model?
Best wishes,
David Maxwell
Hi David - thanks for looking in, I enjoyed this build. I used 2D CAD to develop the framing and some other components, but I don't do any 3D CAD work. Sorry to disappoint. By the way, County Mayo (especially the town of Westport) is one of my favorite areas in Ireland.
-
Hi Will - I've been off the site for a long time and just started checking back in. Nice progress on your Syren - looking really good.
-
-
-
Hi Rich
I've been off the forum for a while due to moving to a new home. Glad to see you're finished your build, and it looks great.
Bluejacket has a kit of the Spray. If you don't want to build from a kit, I think you could just buy the plans.
-
-
Hi Don - really nice work.
When securing a knot, it's better to use matte medium or a diluted white glue to avoid the 'plastic' look. When I don't want any sheen from glue I use Scenic Glue from Woodland Scenics.
- thibaultron, BobG, DonInAZ and 2 others
- 5
-
Hi Doug - very nice work on your Leon. I've been looking in now and then, and just saw your comment on the lumber hatch. One thing you might try is to mix some sawdust from the same wood as the planking with Scenic glue and use it as a filler. Scenic glue (from Woodland Scenics) is a PVA glue that dries without any sheen, so when you use it this way the wood dust visually blends in with the wood around it and flaws are covered really well. I've used this approach with small gaps between planks and it worked for me.
- mtaylor and Doug McKenzie
- 2
-
Nice work, Chris. Keep the updates coming - you're making great progress.
-
-
The original list of free books went fairly quickly. In continuing to get ready for downsizing I'm once again offering the following books free of charge - you just pay the postage. For the time being I'd like to ship a minimum of three books for each request, and will be using PayPal for payment of the postage. Due to time constraints I need to move these books by end of January. Any remaining books will be donated to a local charity.
Please PM me if you're interested in any of the following books:
Ship Design and Construction
The Search for Speed Under Sail 1700-1855, by Howard I. Chappelle No Longer Available
Dorothy Elizabeth – Building a Traditional Wooden Schooner,
by Roger F Duncan No Longer Available
The American Fishing Schooners 1825 – 1935, by Howard I. Chappelle No Longer Available
Anatomy of the Ship – The Schooner Bertha L. Downs,
by Bud Greenhill and Sam Manning No Longer Available
The Building of a Wooden Ship, by Dana A. Story No Longer Available
The Baltimore Clipper, by Howard I. Chappelle No Longer Available
Masting and Rigging, by Harold A. Underhill No Longer Available
The Gaff Rig Handbook, by John Leather No Longer Available
The Rigging of Ships (in the Days of the Spritsail Topmast 1600-1720)
By R.C. Anderson No Longer Available
The Art of Rigging, by George Biddlecombe No Longer Available
Ship Modeling
Period Ship Modelmaking (an ilIustrated Masterclass), by Philip Reed No Longer Available
Rigging Period Fore-and-Aft Craft, by Lennarth Petersson No Longer Available
Rigging Period Ship Models, by Lennarth Petersson No Longer Available
A Modeler’s Guide to Rigging, by Richard Mansir No Longer Available
Ship Models – How to Build Them, by Charles G. Davis
The Ship Model Builder’s Assistant, by Charles G. Davis No Longer Available
The Built-up Ship Model, by Charles G. Davis
Woodworking
Big Book of Scroll Saw Woodworking No Longer Available
Hand Tools (Skill-building techniques and projects) No Longer Available
Table Saw Secrets (Tips, Techniques, Plans, and Projects) No Longer Available
Machining
Workshop Techniques for Clockmakers and Modelmakers, by W.R.Smith No Longer Available
The Model Engineers Workshop Manual, by Geo. H. Thomas No Longer Available
Building Simple Model Steam Engines, by Tubal Cain No Longer Available
Milling for Home Machinists, by Harold Hall No Longer Available
Mini-Lathe for Home Machinists, by David Fenner No Longer Available
The Complete Metalsmith (an Illustrated Handbook), by Tim McCreight No Longer Available
Workshop Practice Series books: No Longer Available
Workholding in the Lathe
Simple Workshop Devices
Vertical Milling in the Home Workshop
Hardening, Tempering, and Heat Treatment
Soldering and Brazing
Dividing
I also have:
8 back issues of Woodsmith Magazine No Longer Available
5 back issues of Home Machining magazines. No Longer Available
-
We'll be downsizing to a smaller house, and there won't be enough room for many of the books I've collected since I started modeling.
I'm offering the following books free of charge - you just pay the postage. For the time being I'd like to ship a minimum of three books for each request, and will be using PayPal for payment of the postage. Due to time constraints I need to move these books by end of January. Any remaining books will be donated to a local charity.
Please PM me if you're interested in any of the following books:
Ships, General
American Fishermen, by Albert Cook Church No Longer Available
The Charles W Morgan, by John F. Leavitt No Longer Available
Pacific Square Riggers, by Jim Gibbs No Longer Available
Merchant Sailing Ships 1850-1875, by David R MacGregor No Longer Available
A Maritime Archeology of Ships, by Jonathan Adams No Longer Available
The History of the Sailing Ship, by ARCO Publishing
Ship Design and Construction
Sloops & Shallops, by William A. Baker No Longer Available
The Search for Speed Under Sail 1700-1855, by Howard I. Chappelle
Dorothy Elizabeth – Building a Traditional Wooden Schooner, by Roger F Duncan
The American Fishing Schooners 1825 – 1935, by Howard I. Chappelle
Sailing Ships, by Colin Mudie No Longer Available
Pete Culler on Wooden Boats, Edited by John Burke No Longer Available
Small Ships – Benford Design Group
Thomas F McManus and the American Fishing Schooners, by W.M.P. Dunne No Longer Available
Seventeenth Century Rigging, by R. C. Anderson No Longer Available
Ship Modeling
William Frederick’s (1874) Scale Journey, by Antonio Mendez C. No Longer Available
2013 Shipwright, Edited by John Bowen and Jean Hood No Longer Available
American Ship Models and How to Build Them, by V.R. Grimwood (2 versions) No Longer Available
The Cutty Sark, Vols 1 & 2, by C.N. Longridge No Longer Available
Building Model Ships from Scratch, by Kent Porter No Longer Available
The Art of Ship Modeling, by A. Richard Mansir No Longer Available
Models of American Sailing Ships, by Robert E. Peabody No Longer Available
- GrandpaPhil, Ryland Craze and mtaylor
- 3
-
Very nice work, Chris. You're making some real progress now.
-
I agree with Steve - I would use two-part epoxy. The five-minute type would be my choice.
A couple of points: when you clamp the piece to the hull you'll find that the wet epoxy is pretty slippery and the piece may want to slide while you're clamping it. Also, the epoxy will tend to run and ooze out of the small holes. This can be cleaned up while it's still wet by washing the unwanted epoxy off with a brush dipped in 90% isopropyl alcohol. You need to make sure you get the unwanted epoxy off before it has cured - after it's cured you'd have to grind it off.
Chris - like doing anything for the first time I'd use some scrap pieces for testing until you get familiar with using the epoxy. Epoxy is super strong when cured, so you won't need to use a lot of it. And you're always welcome to come over so we can play around with the epoxy before you put it on your model.
-
Nice work, Chris. I'll be following along, and hope to see it in person sometime.
-
On 9/3/2019 at 4:24 PM, Jack12477 said:
Frank, I used those green Velcro cloth plant ties to hold my boat to the back seat of the car. I loop it thru the child safety seat anchors hidden under the car seat back placing one leg under the build board and the other leg under the boat and over the board. Overlap the two legs about 5-6 inches and the will hold it fast to the car seat. Drove 3 hours with a model to conference and return 3 hours with no ill effects. The strips are about 1/4 inch wide and can be found in the garden section of Lowes or Home Depot.
Thanks for the suggestion Jack. I'll be driving a small SUV, so won't need to use the seat anchors.
On 9/4/2019 at 7:14 PM, Moab said:I spend a lot of time In San Diego but bummed out I won’t be there when you visit. Kathryn is one of my favorite models and builds but I’ll miss her...Moab
Too bad - always like to meet other MSW members.
- mtaylor, thibaultron, cog and 1 other
- 4
-
I'll be taking Kathryn to next week's meeting of the San Diego Ship Modelers Guild, and then will be going on to Carlsbad, California - total driving time will be around 12 hours. I'm a little nervous about Kathryn bouncing around in the car for that long, so I had to devise a way to keep her steady in the car.
The building board for the Kathryn build is about 6-8 inches longer than the overall length of the model, so I will use that board and I devised a clamping arrangement to keep her steady on the board, as in the following photo.
The cross-pieces press down on Kathryn's base, and the surface of the cross-piece which touches the base is lined with a soft rubber padding to avoid scratching the base.
The boom is only held from swaying side-to-side by the main sheet, so I wedged a piece of soft foam rubber between the boom and the board that joins the 2 davits.
The yawl boat is suspended from the davits by a block configuration and could easily sway back and forth and do some damage to itself and/or the model, so I epoxied a clear acrylic rod between the side of the boat and the bumper at Kathryn's rear. This is a permanent solution, but I thought it was necessary to protect the model during its life - not just for the trip.
Some future work still remains for Kathryn - she needs a display case to protect her from dust, dirt, grandchildren, and cleaning ladies. In the meantime I've started the drafting process for the next model, and I'll post a link here when I start a new build log in a month or so.
Cheers, everyone!
-
-
-
Thanks Carl, and thanks Tom.
- mtaylor, thibaultron and Canute
- 3
-
-
5 hours ago, JerryTodd said:
As someone that's worked on these boats, you've done a beautiful job capturing one; albeit, a little cleaner than I remember
Thanks Jerry. I admire folks like yourself who have actually worked on these boats. I have a good friend who is an experienced waterman (and an excellent modeler) who has been a great source of info during the project.
1 hour ago, niwotwill said:Fantastic is all I can say after spending the last two evenings reading you log. I wish I could pick on thing to say is the best part, but there are no best parts of the ship. Simply fantastic!!!!
Will
Thanks Will. I think when you see Kathryn in person you'll probably pick out some things that are NOT the best parts!
- Canute, thibaultron, mtaylor and 1 other
- 4
-
On 7/24/2019 at 6:35 AM, Omega1234 said:
I jest of course, Frank, but those furled sails looks absolutely fabulous.
Congrats, once again.
Cheers
Patrick
Thanks Patrick - but I don't think I'll be making sails again.
On 7/24/2019 at 6:52 AM, popeye the sailor said:beautiful boat Frank........amazing quality in your hand made parts very well done! looking forward in seeing the Leonard.
Thanks Popeye. The JTL will be interesting when compared to skipjacks.
On 7/24/2019 at 1:17 PM, FriedClams said:Sweet piece of work Frank! Congratulations on its completion. Beautiful model.
Gary
Thanks Gary.
21 hours ago, EdT said:Beautiful model, Frank. Wonderful workmanship and attention to detail. Love it.
Ed
Thanks Ed. I've tried to apply what I've learned from watching your work since I started modeling.
19 hours ago, dvm27 said:Would look great in any maritime museum, Frank. Well done!
Thanks Greg. I've actually been thinking that at some point I might offer the Kathryn to CBMM.
29 minutes ago, John Allen said:Frank,
First class, well done. Obviously not a working dredger no sacks, oysters, culling boards and irons and no mud. KUDOS on a fine build.
Thanks John. I guess you could say this is how she looks at the start of each oystering season, before the paint dries.
- mtaylor, John Allen, Omega1234 and 3 others
- 6
-
Splendid by Omega1234 - Scale 1:500 - Mega Yacht
in - Build logs for subjects built 1901 - Present Day
Posted
Hi Patrick. Looking forward to watching you create another one of your splendid models.