Jump to content
MORE HANDBOOKS ARE ON THEIR WAY! We will let you know when they get here. ×
Model Machines LLC – Byrnes Model Machines - machines to be back in production soon. ×

druxey

NRG Member
 View Profile  See their activity

  • Posts

    13,183

  • Joined

  • Last visited

 Content Type 

Everything posted by druxey

  1. druxey
    When you fair the frames (sand gently!) it should take care of things.
  2. druxey
    I've used limewood in the past. It is very nice to work and carves well. (Grinling Gibbons' work was mainly in lime.) I found it a little soft, so one has to work carefully in order not to accidentally mark or dent it. It's certainly a little harder than basswood, a close cousin. Try it: I think you'll like it.
  3. druxey
    Nice start! Will you be milling templates for every frame?
  4. druxey
    Welcome to another Ontarian. Check out the Marine Modelers of Niagara club site for monthly Zoom meetings.
  5. druxey
    To correct, only dampen the concave side; in this case it's the bottom surface and clamp across. The wood fibers that side will expand.
  6. druxey
    It seems that the suggestion of making the angles of the outer aft edges the same will at least simplify the problem considerably. Do I understand the right side drawing to be plan view from above, or are the deck levels different on each side?
  7. druxey
    A fascinating exercise in developing the optimal solution, Michael! Thanks for sharing this series of experiments.
  8. druxey
    Super work!
  9. druxey
    Lovely progress. The edges of forecastle and quarter deck had the plan ends butted into the recess along a beam of larger scantling as you surmised. Shipwrights tried never to have exposed end-grain that would absorb moisture and then rot. In addition a very slight lip along the upper edge of the beam would act as a spurnwater to direct water to the outboard edges of the deck.
  10. druxey
    That is correct for British ships at that time period, HH.
  11. druxey
    I suppose you could bend the toptimber - if you made it of pasta!
  12. druxey
    Yes, HH. The area where the gun carriage trucks traversed were done in 'top and butt' and of oak, not deal.
  13. druxey
    That's one nice way to show the underlying structures.
  14. druxey
    Mooselookmeguntic? More like 'Moose look gigantic'! Either way, this subject looks interesting.
  15. druxey
    Please don't cover that all beautiful framing up completely with planking!
  16. druxey
    Is the material the deadeyes are made from really suitable at that size and scale? How frustrating for you.
  17. druxey
    Superb as usual, Valeriy. I've found model-making a good way of reducing stress. Heartfelt best wishes in these uncertain days.
  18. druxey
    Looks right!
  19. druxey
    Beautiful work, terrible news.
  20. druxey
    Very nice and methodical!
  21. druxey
    Whew! A lengthy procedure rather, I suspect. like walking a high wire. Glad you didn't fall off! Terrific result.
  22. druxey
    Those furled sails look as good as any I've seen. Nice work.
  23. druxey
    Looking good, Toni!
  24. druxey
    Never use oil finish anywhere you will need to glue anything onto later!
  25. druxey
    Looking really good!

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...