Jump to content

Recommended Posts

Posted

Hello,

 

This is my 3D build log for HMS Pandora. The build was started in February 2011, and it is still in progress.

 

The primary references include the Anatomy of the Ship: The 24-gun Frigate Pandora (the plans), The Shipbuilder's Repository (it contains the dimensions and the scantlings of HMS Porcupine, which is of the same class as the Pandora), and the “Swan” Series. Many other books and online resources are also referred to.

 

I began with drafting a 2D drawing of the ship, and then I imported different parts of the 2D drawing into Solidworks to guide the 3D building process.

 

In the following posts I will post the screenshots I captured during the build and briefly describe what is new in each figure.

 

Jingyang

Best regards,

Jingyang

 

Current build: HMS Pandora (1779) in 3D

Posted

Let's get started!

 

2011-02-09: keel, false keel, perpendiculars, cutting down line, lower deck, upper deck, stem post, stern post, stern counters, stern timbers

post-142-0-15575500-1363137391_thumb.jpg

 

2011-02-10: toptimber line, top side lines, water lines, forecastle, quarter deck

post-142-0-07189300-1363137412_thumb.jpg

 

2011-02-12: lower breadth line, upper breadth line, main wale, sheer rail, waste rail, drift rail, fife rail

post-142-0-69408300-1363137432_thumb.jpg

 

2011-02-15: gun ports

post-142-0-22218600-1363137449_thumb.jpg

 

2011-02-17: channels, deadeyes

post-142-0-36546600-1363137469_thumb.jpg

 

2011-02-18: planking above the load water line, platforms, knee of the head, ladder, fenders, chestree

post-142-0-32368000-1363137489_thumb.jpg

 

2011-02-19: lower cheek, upper cheek

post-142-0-97589800-1363137505_thumb.jpg

 

2011-02-20: head rails, head timbers, cathead

post-142-0-99945300-1363137525_thumb.jpg

 

2011-02-21: taffrail, quarter gallery

post-142-0-59491300-1363137546_thumb.jpg

 

2011-02-22: rudder

post-142-0-24442100-1363137563_thumb.jpg

 

2011-02-24: gun port lids, sweep ports, scuppers, hammock cranes, swivel guns. The taffrail and the quarter gallery were modified.

post-142-0-67866500-1363137599_thumb.jpg

Best regards,

Jingyang

 

Current build: HMS Pandora (1779) in 3D

Posted

2011-02-26: details of the chains and deadeyes

post-142-0-87596400-1363137672_thumb.jpg

 

2011-02-28: HALF-BREADTH PLAN added - keel assembly, main half breadth, toptimber half breadth, top side half breadth, half breadth of the rising line, projections of the diagonals

post-142-0-19649300-1363137697_thumb.jpg

 

2011-03-02: BODY PLAN added. A set of lines for the inner surface of the frames are also drawn but not shown in this figure.

post-142-0-63644400-1363137723_thumb.jpg

 

2011-03-04: water lines, cant frames, fashion piece, hawse pieces, transoms, inner post, apron, keelson, first thick limber strake next the limbers

post-142-0-69380100-1363137754_thumb.jpg

 

2011-03-05: deadwood knee, disposition of the frames

post-142-0-77818600-1363137802_thumb.jpg

 

2011-03-08: disposition of the square frames

post-142-0-32432400-1363137826_thumb.jpg

 

The 3D build began from this point!

Best regards,

Jingyang

 

Current build: HMS Pandora (1779) in 3D

Posted

2011-05-17: internal planking and external planking

post-142-0-08351500-1363138019_thumb.jpg

post-142-0-03929400-1363138025_thumb.jpg

 

2011-05-20: The space between the internal planking and the external planking was filled to form the shape of the frames.

post-142-0-62535200-1363138055_thumb.jpg

 

2011-05-21: the shape of the keel assembly

post-142-0-27964500-1363138095_thumb.jpg

post-142-0-50602500-1363138101_thumb.jpg

 

2011-05-23: cutting the frames

post-142-0-41716100-1363138127_thumb.jpg

 

2011-06-12: All frames were completed!

post-142-0-14163500-1363138144_thumb.jpg

post-142-0-70787000-1363138157_thumb.jpg

Best regards,

Jingyang

 

Current build: HMS Pandora (1779) in 3D

Posted

2011-06-15: main wale

post-142-0-51068900-1363138330_thumb.jpg

 

2011-06-15: shape of the external planking

post-142-0-39109700-1363138366_thumb.jpg

 

The frames can be seen by setting the external planking transparent!

post-142-0-99389600-1363138383_thumb.jpg

 

2011-06-16: Cutting the bottom planking into individual planks.

post-142-0-30020100-1363138442_thumb.jpg

 

2011-06-17: Finished cutting the bottom planking.

post-142-0-47441900-1363138459_thumb.jpg

 

2011-06-18: The main wale was also cut into individual pieces.

post-142-0-74541400-1363138484_thumb.jpg

post-142-0-70967600-1363138492_thumb.jpg

post-142-0-50597100-1363138504_thumb.jpg

post-142-0-25206300-1363138512_thumb.jpg

 

Best regards,

Jingyang

 

Current build: HMS Pandora (1779) in 3D

Posted (edited)

Jingyang,

 

I played around with 3d years ago and never came close to the skill you are showing. Well done.

 

David

 

Thank you, David!

 

At the beginning I was not sure about how to draw this in 3D either. And I tested quite a few methods until I found the one that works for me. :)

 

Jingyang

Edited by ppddry

Best regards,

Jingyang

 

Current build: HMS Pandora (1779) in 3D

Posted

Incredible work! It shows so much detail of a physical build! Thanks for showing all the interim work to get to the more complete-looking model.

-----------------------------------------------------------------------------------------------------

-Sarah

Current Build:

Krabbenkutter CUX-87

Harriet Lane

Fishcutter GO-38

 

In the Wings:

Corel Victory Cross section

 

Completed Build:

USS Missouri minimissouri.jpgHMS Bounty's Jolly Boat thumbnail.jpg Peterboro Canoe tiny.jpg

Posted

2012-06-05: assembling the stern to the hull, adding the rudder chains

post-142-0-49093900-1363145407_thumb.jpg

post-142-0-76409000-1363145408_thumb.jpg

post-142-0-97191500-1363145409_thumb.jpg

 

2013-02-11: ladders connecting the lower deck to the upper deck, chain pump winches, iron pillars on the upper deck, shot racks on the upper deck

post-142-0-93640100-1363145995_thumb.jpg

 

2013-03-04 to 05: forecastle planking and fittings, quarter deck planking and fittings, catheads, stove, capstan, forecastle planksheer

post-142-0-74157600-1363146038_thumb.jpg

post-142-0-53251700-1363146039_thumb.jpg

post-142-0-61366700-1363146040_thumb.jpg

post-142-0-67736400-1363146041_thumb.jpg

post-142-0-47116300-1363146042_thumb.jpg

 

Best regards,

Jingyang

 

Current build: HMS Pandora (1779) in 3D

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...