DenPink Posted January 18, 2016 Author Share #91 Posted January 18, 2016 Hi all Next deck planked , sanded and one coat of satin varnish. Denis cristikc, UpstateNY, dgbot and 2 others 5 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
Keith_W Posted January 18, 2016 Share #92 Posted January 18, 2016 So this is where you are! I was wondering why I haven't seen any Royal William updates for quite a while. Nice job you are doing so far. mtaylor, DenPink and Thennion 3 Quote Regards, Keith 2007 (completed): HMS Bounty - Artesania Latina 2013 (completed): Viking Ship Drakkar - Amati 2014 (completed): HMS Bounty Launch - Model Shipways Current: HMS Royal William - Euromodel Link to comment Share on other sites More sharing options...
DenPink Posted January 18, 2016 Author Share #93 Posted January 18, 2016 So this is where you are! I was wondering why I haven't seen any Royal William updates for quite a while. Nice job you are doing so far. Hi Keith Just needed a rest from the RW. Will be back to the RW in about 2 weeks time. Denis. mtaylor 1 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
John Maguire Posted January 20, 2016 Share #94 Posted January 20, 2016 Dennis, the decks are looking great . . . Respectfully, John maggsl_01, DenPink and mtaylor 3 Quote Link to comment Share on other sites More sharing options...
DenPink Posted January 22, 2016 Author Share #95 Posted January 22, 2016 Hi I have come up against a problem ha-ha, well not a problem as such. Part 42 Bow deck, fit to bulkhead frames. The only way you can do this is just about bend it double ( it is only 0.83mm thick ). Now it is fitted, you have to draw lines for other parts. Now remove parts 42 and plank it. Like Martin said in his Revenge log, no way can you do this as the planks are 1mm thick and the deck when you have finished planking will be to stiff to bend it, you will bugger the planking up. As I have started my planking on the other decks with the first plank going down the centre line, so no way am I going to cut the deck in half. One other thing is on this deck is a square cut out, mine is just to the side of the centre line, the book has it way over to one side ( see red on photo ) ???. Denis. UpstateNY, maggsl_01, Visi and 3 others 6 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted January 29, 2016 Author Share #96 Posted January 29, 2016 Hi all Just a small update. Decks are fitted and steps to gun deck. Denis. edmay, mtaylor, UpstateNY and 8 others 11 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
riverboat Posted January 29, 2016 Share #97 Posted January 29, 2016 Wow! that looks like a pretty big model.......... the decking looks awesome Denis, Nice work there!! Frank edmay, DenPink and mtaylor 3 Quote completed build: Delta River Co. Riverboat HMAT SUPPLY USRC "ALERT" in progress: Red Dragon (Chinese junk) Link to comment Share on other sites More sharing options...
DenPink Posted January 29, 2016 Author Share #98 Posted January 29, 2016 Wow! that looks like a pretty big model.......... the decking looks awesome Denis, Nice work there!! Frank Hi Frank Thank you for them kind words my friend. She is not that big the keel is about 600mm long, the "RW" is about 1m long. Denis. mtaylor, riverboat and edmay 3 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
Titanic87 Posted February 1, 2016 Share #99 Posted February 1, 2016 Hello Dennis R, I'm also building this kit, it's been a beautiful build so far (I'm on the rigging stage) but I've found that they don't supply you with enough large copper eyelets (parts 228 in parts list on the instruction manual) so you might want to purchase extras. Hope your build goes well. ships88, mtaylor and DenPink 3 Quote Link to comment Share on other sites More sharing options...
Visi Posted February 1, 2016 Share #100 Posted February 1, 2016 Denis - Very Nice visi mtaylor and DenPink 2 Quote Link to comment Share on other sites More sharing options...
DenPink Posted February 1, 2016 Author Share #101 Posted February 1, 2016 Thank you Visi. Denis mtaylor 1 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted February 1, 2016 Author Share #102 Posted February 1, 2016 Hi Brian Thank you also for them nice words my friend. Denis. mtaylor and Brian the extraordinaire 2 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted February 2, 2016 Author Share #103 Posted February 2, 2016 Hi all Just a little update ha-ha. Stained and glued some of the beams in on the gun deck. Sorry that is all I have done. Denis. John Maguire, Harvey, maggsl_01 and 8 others 11 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
maggsl_01 Posted February 2, 2016 Share #104 Posted February 2, 2016 Hi Denis, really looks great. I like the shine of the deck and the accuracy of the planks. The kit seems to be a neat piece of fun As I don't know Amati so far can you please tell me something about the instructions? On pic shows a booklet - but are there "real" plans too? Looking forward to your next update Cheerio Max DenPink and mtaylor 2 Quote Next: Friedrich Wilhelm zu Pferde by Euro Model 1:47 Finished: Half Moon Corel; HMY Royal Caroline Panart; HMB Endeavour Occre 1:54; Fregatte Berlin, Corel, 1:40 A life without dogs is possible... but worth to live? Link to comment Share on other sites More sharing options...
Visi Posted February 2, 2016 Share #105 Posted February 2, 2016 Denis That is some fine work you are doing.... visi mtaylor and DenPink 2 Quote Link to comment Share on other sites More sharing options...
DenPink Posted February 2, 2016 Author Share #106 Posted February 2, 2016 Hi Denis, really looks great. I like the shine of the deck and the accuracy of the planks. The kit seems to be a neat piece of fun As I don't know Amati so far can you please tell me something about the instructions? On pic shows a booklet - but are there "real" plans too? Looking forward to your next update Cheerio Max Hi Max Sent you an email Ok. Denis mtaylor 1 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted February 3, 2016 Author Share #107 Posted February 3, 2016 Denis That is some fine work you are doing.... visi Thank you my friend. Denis mtaylor 1 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted February 8, 2016 Author Share #108 Posted February 8, 2016 Hi All I don't know if this will help anyone in the future. The Revenge has two capstans, the instruction book says drill holes and square them off with a file. Sorry I have not seen a file that small. I came up with this but I did not use it on my capstans as I had made them and one glued in place. But it was playing on my mind. I got a small nail, then filed 4 sides on it to a point ( see attachment ). After you drill the hole just put the nail in and give it a small tap. Now you have a square hole. Denis. mtaylor, CaptainSteve, marktiedens and 4 others 7 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
edmay Posted February 8, 2016 Share #109 Posted February 8, 2016 Clever nail invention, maybe you should patern it,ha, very nice clean,straight planking,nice work my friend .Edwin CaptainSteve, DenPink and mtaylor 3 Quote Link to comment Share on other sites More sharing options...
Visi Posted February 9, 2016 Share #110 Posted February 9, 2016 You have proven the point many times - A "Problem" is merely a "Solution" in waiting... Well Done -- visi DenPink, mtaylor, CaptainSteve and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Titanic87 Posted February 9, 2016 Share #111 Posted February 9, 2016 Great idea I will remember that one for the future. Thank you Denis R DenPink and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
DenPink Posted February 12, 2016 Author Share #112 Posted February 12, 2016 Hi all First thank you all for your likes and comments. Just a small update. Capstan in, Whipstaff in place , stairs in. Denis. UdoK, John Maguire, dgbot and 14 others 17 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
riverboat Posted February 12, 2016 Share #113 Posted February 12, 2016 Nice!! Denis...... Frank Altduck, DenPink, edmay and 2 others 5 Quote completed build: Delta River Co. Riverboat HMAT SUPPLY USRC "ALERT" in progress: Red Dragon (Chinese junk) Link to comment Share on other sites More sharing options...
Malcolm Greig Posted February 15, 2016 Share #114 Posted February 15, 2016 Excellent work Denis. I am very much enjoying your building log. Malcolm DenPink, Altduck and mtaylor 3 Quote Completed builds; Caldercraft Mars; Vanguard Alert, Amati Revenge On the shelf; Vanguard DOK & the Sphinx Link to comment Share on other sites More sharing options...
DenPink Posted February 19, 2016 Author Share #115 Posted February 19, 2016 Hi all Just a little update. I have fitted the cabin deck and planked the walkway on the outside. I did not put the caulking lines on the inside planks. I am a bit mad about this as I do like to see the caulking lines. I don't know if they did caulking on the inside of the cabins in 1577 as I was not born then ( the wife said I was so I will not argue with her ). I have dry fitted part 51 to see what it looks like, yes I know it is too far over to the right. Will now sand and put a coat of satin varnish on the walkways as they have only got two coats of sanding sealer. Denis. CaptainSteve, riverboat, pirozzi and 10 others 13 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted February 21, 2016 Author Share #116 Posted February 21, 2016 Hi Stairs in place, doors on. Next is dry fit the next deck, now I am going to plank it, Sorry about the dust. Denis. John Maguire, coxswain, cristikc and 10 others 13 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted February 22, 2016 Author Share #117 Posted February 22, 2016 how much of that interior detail will be visible when you plank the deck, Denis ? Hi Brian To answer your question you don't see any of the interior detail as far as I can see. Denis mtaylor 1 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted February 26, 2016 Author Share #118 Posted February 26, 2016 (edited) Hi all Well I have made a boo boo , not the first time and will not be the last . The forecastle deck I planked of the ship. I then glued it to the bulkhead frames. I did not realize that the top of the frames had to be cut off, after gluing the deck on, then plank the deck. No big deal I only had 3 planks each side to take off. I decided to have a rest from planking, so I have made the helmsman canopy. The kit supplies a strip of walnut shaped like an L, this goes on the inside to reinforce the 4 corners. After you have glued the 4 parts together it is time to put the trim on the outside 1x2mm, do this first before you plank the roof. When you have fitted the trim file or sand to shape to the roof line, now fit the roof planks 1x2mm. I have applied 2 coats of sanding sealer, and 1 coat of satin varnish (2 more to go). Will stain the inside later. Denis Edited February 26, 2016 by Denis R edmay, sapperred1, John Maguire and 10 others 13 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
edmay Posted February 26, 2016 Share #119 Posted February 26, 2016 Nicely done canope,Edwin mtaylor and DenPink 2 Quote Link to comment Share on other sites More sharing options...
DenPink Posted February 26, 2016 Author Share #120 Posted February 26, 2016 agree, very neat and nicely done Denis. Hi Brian Those words mean a lot to me my friend. Denis edmay, mtaylor and Brian the extraordinaire 3 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.