Elijah Posted May 5, 2016 #31 Posted May 5, 2016 Very nice job! Altduck and mrshanks 2 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
stripehunter Posted May 7, 2016 Author #32 Posted May 7, 2016 I think I'm going to leave the bowsprit as is; I have seen pilot cutters like this with a similar arrangement, plus I don't feel I'm at a stage in my skill to do much modifying. I am unsure of what to do with the stern. Many variations of this kit have the top of the upper transom squared off and flush with top edge of the bulwarks. My vintage has a curved arc going above the bulwarks. I like the curve, but I'm not sure how I would cap off the plywood as of yet. If I can't figure out something I like, I will probably end up cutting it flush down to the bulwarks. Elijah 1 Quote Current build: Constructo Enterprise 1799 Completed build: Artesania Latina Swift 1805 Started but on hold: Sergal President 1760
stripehunter Posted May 24, 2016 Author #33 Posted May 24, 2016 A few more weeks time. I decided to square off the upper transom. Then I gave the exterior a coat of poly to look for and fix any dried glue seepage, and just because I wanted to see it with some finish on it. Then I started cutting in the scuppers. Made a couple little mistakes on them. Mainly side to side disparities. Live and learn. After the scuppers were cut out, I started working on the timberheads on one side. mrshanks, DocBlake, Elijah and 5 others 8 Quote Current build: Constructo Enterprise 1799 Completed build: Artesania Latina Swift 1805 Started but on hold: Sergal President 1760
DocBlake Posted May 24, 2016 #34 Posted May 24, 2016 The poly really makes the wood come alive. Nice job. Although I switched out a lot of the wood for my Swift build, I used the stock hull planking. It really is quite nice after a couple of coats of poly! mrshanks and Elijah 2 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
donrobinson Posted May 24, 2016 #35 Posted May 24, 2016 Looking real good, amazing what a coat of poly will do for a ship Elijah and mrshanks 2 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
stripehunter Posted June 11, 2016 Author #36 Posted June 11, 2016 Work on the timberheads continues. I didn't like my seam between the deck and curved part by the tiller, so I continued the deck border around the stern. Like many, my stern knees weren't even close to the right shape/size. Combine that with the trim piece I added across the stern, I had to make new ones. I have some sapelle veneer I have been saving for a future project. I glue laminated four layers of this to make a sapelle slab from which I could make new pieces. The new pieces fit perfectly, and I like them a little more stout than the original shapes. The glue lamination also had the effect of making very strong little pieces with no fear of snapping them in half as I worked. It made the pieces tougher so I didn't have to worry about removing too much material in one pass as I carved them to shape. I will need to remember that trick. Elijah, WackoWolf, GuntherMT and 2 others 5 Quote Current build: Constructo Enterprise 1799 Completed build: Artesania Latina Swift 1805 Started but on hold: Sergal President 1760
stripehunter Posted June 17, 2016 Author #37 Posted June 17, 2016 continued with the timberheads, and got my homemade knees in place. Rudder hole bored, and rudder all lined up. Tenon carved into the end of the rutter. dry fit with tiller handle More dry fitting Mirabell61, mrshanks, Elijah and 2 others 5 Quote Current build: Constructo Enterprise 1799 Completed build: Artesania Latina Swift 1805 Started but on hold: Sergal President 1760
DocBlake Posted June 17, 2016 #38 Posted June 17, 2016 Looking good! I replaced the knees at the stern on my model also. The ones in the kit were so flimsy! mrshanks and Elijah 2 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
Mirabell61 Posted June 17, 2016 #39 Posted June 17, 2016 beautiful build Stripehunter, Nils mrshanks and Elijah 2 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
stripehunter Posted July 25, 2016 Author #40 Posted July 25, 2016 work and life have kept me from working on the swift for some time. I finally spared a couple of hours to do some work. I finished off my timberheads, and cut out new gunnels from the big piece of sapele plywood I made before. Now that they are glued, i'll need to do some more sanding/trimming, etc. of course. Hopefully that won't be very long. WackoWolf, mrshanks, Elijah and 3 others 6 Quote Current build: Constructo Enterprise 1799 Completed build: Artesania Latina Swift 1805 Started but on hold: Sergal President 1760
stripehunter Posted August 1, 2016 Author #41 Posted August 1, 2016 weather kept me indoors this weekend, so i got my gunwails finished, as well as the stern. i also started assembling the cabins. I'm very pleased with how the cap on the stern came out after i decided to make it flush across. WackoWolf, Elijah, GuntherMT and 4 others 7 Quote Current build: Constructo Enterprise 1799 Completed build: Artesania Latina Swift 1805 Started but on hold: Sergal President 1760
Moonbug Posted August 7, 2016 #42 Posted August 7, 2016 Nice clean work. Love this ship - great opportunity to pick up some valuable tidbits and shorten learning curves. -Bug Elijah 1 Quote - Bug Current Build: HMS Pegasus - Vanguard Models Completed Builds - Augie's USF Confederacy AL Santa Maria - Heavily Bashed AL San Juan Nepomuceno AL Swift Pilot Boat Cris Craft AL Stagecoach Ship Blog - The Lehman Shipyard
stripehunter Posted August 9, 2016 Author #43 Posted August 9, 2016 got some more work done. Put a coat of poly on the topside surfaces. Also did a lot of finish work on the hatches. Those things are small little models in their own right. I have the larger of the two almost done. I kept the rounded corners of the roof, which made it a bit of a task to curve a strip of wood around them to cover the plywood. I got it figured out though finally. russ, DocBlake, heksanol and 3 others 6 Quote Current build: Constructo Enterprise 1799 Completed build: Artesania Latina Swift 1805 Started but on hold: Sergal President 1760
DocBlake Posted August 9, 2016 #44 Posted August 9, 2016 Looking good! Nice progress. Elijah 1 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
stripehunter Posted August 15, 2016 Author #45 Posted August 15, 2016 I did some more work on my other hatch today, and I also got one of the sliding tops done and installed. Elijah, russ, heksanol and 3 others 6 Quote Current build: Constructo Enterprise 1799 Completed build: Artesania Latina Swift 1805 Started but on hold: Sergal President 1760
stripehunter Posted August 22, 2016 Author #46 Posted August 22, 2016 My front hatch is now completely done. I went with hinged doors. I don't have a full range of motion with them, but not much I can do about it now. It's not like they'll ever be opened up anyway once finished. These little hinges was I say about the most frustrating piece of work so far. russ, DocBlake, Elijah and 3 others 6 Quote Current build: Constructo Enterprise 1799 Completed build: Artesania Latina Swift 1805 Started but on hold: Sergal President 1760
stripehunter Posted August 24, 2016 Author #47 Posted August 24, 2016 I've decided that i spent too much time hinging the doors for them to not open fully. I'm gong to try and shave off some material on the corners that is hitting the open doors. hopefully i wont regret it. Elijah 1 Quote Current build: Constructo Enterprise 1799 Completed build: Artesania Latina Swift 1805 Started but on hold: Sergal President 1760
stripehunter Posted August 25, 2016 Author #48 Posted August 25, 2016 I was successful in my attempt to widen the door opening without destroying anything. Full operation now. also widened the other hatch too in anticipation or the doors it doesnt have yet. GuntherMT, Robin Lous, mrshanks and 4 others 7 Quote Current build: Constructo Enterprise 1799 Completed build: Artesania Latina Swift 1805 Started but on hold: Sergal President 1760
stripehunter Posted August 31, 2016 Author #49 Posted August 31, 2016 Got my second set of hatch doors done. Was much easier than the first one. Next step will be fitting the rudder. After many months I'm starting to see light at the end of the tunnel. Mirabell61, mrshanks, Elijah and 3 others 6 Quote Current build: Constructo Enterprise 1799 Completed build: Artesania Latina Swift 1805 Started but on hold: Sergal President 1760
Mirabell61 Posted August 31, 2016 #50 Posted August 31, 2016 nice work Stripehunter, slide hatch and doors look great, also choise of wood tones and deck... Nils Elijah 1 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
DocBlake Posted September 1, 2016 #51 Posted September 1, 2016 Coming along well. I'm anxious to see the rudder! Elijah and mrshanks 2 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
Elijah Posted September 1, 2016 #52 Posted September 1, 2016 Nice job! I love it when things work on the ship! mrshanks 1 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
stripehunter Posted September 2, 2016 Author #53 Posted September 2, 2016 I had to carve out the openings in the rudder a bit deeper to accommodate the hinges, which required refinishing the rudder afterwards. So, with no more work I could do on that while poly dried, I turned my attention to the front of the boat, and got my bowsprit formed, and the holes for it and the anchor lines drilled, etc. The rudder will need to wait for another day. mrshanks, russ, Elijah and 1 other 4 Quote Current build: Constructo Enterprise 1799 Completed build: Artesania Latina Swift 1805 Started but on hold: Sergal President 1760
DocBlake Posted September 2, 2016 #54 Posted September 2, 2016 That is looking great! Drilling big holes in the bow is always stressful. They turned out perfectly. mrshanks, Elijah and achuck49 3 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
stripehunter Posted September 4, 2016 Author #55 Posted September 4, 2016 Had a very productive couple of days. I got the hinges on the rudder. I soldered the hinge pin to the rudder side of the hinges before mounting to the rudder. I then got the whole deal fixed to the stern post finally. Took me a while to figure out how to trim the top hinge, whether to wrap it around the hull or just go short. I kept it short. I glued on the tiller handle which I had previously fit and shaped. I also finished the mounting cross timbers for the bowsprit and got them all poly'd. Then I figured it was time to drill two more holes I had been dreading; the fore and main mast sockets. It ended up not being bad at all, just had to go slowly and carefully. Using a nice sharp brad point bit, got my drill press table set to the correct rake angle, then rested my keel right on it. Then I used a level across the rail to make sure I was perpendicular. Worked quite well. Test fitting the masts shows I did a pretty good job at drilling those holes. DocBlake, Elijah, GuntherMT and 3 others 6 Quote Current build: Constructo Enterprise 1799 Completed build: Artesania Latina Swift 1805 Started but on hold: Sergal President 1760
DocBlake Posted September 4, 2016 #56 Posted September 4, 2016 Great progress. The rudder looks great, and your mast angles look spot on! Elijah 1 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
stripehunter Posted September 7, 2016 Author #57 Posted September 7, 2016 I had a bit of time, so got the mast trim pieces shaped and mounted, and started working on rings and eyebolts. russ, John Allen, WackoWolf and 2 others 5 Quote Current build: Constructo Enterprise 1799 Completed build: Artesania Latina Swift 1805 Started but on hold: Sergal President 1760
Elijah Posted September 10, 2016 #58 Posted September 10, 2016 Nice job with those masts! Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
stripehunter Posted September 10, 2016 Author #59 Posted September 10, 2016 (edited) spent a few more hours working on things today. Worked on more eyebolts and cleats. wired up a few blocks as well. I also got the ladders assembled and mounted, and the pump put together and working. Edited September 10, 2016 by stripehunter GuntherMT, DocBlake, russ and 3 others 6 Quote Current build: Constructo Enterprise 1799 Completed build: Artesania Latina Swift 1805 Started but on hold: Sergal President 1760
donrobinson Posted September 11, 2016 #60 Posted September 11, 2016 She is really taking shape, you are doing a real fine job on her Elijah 1 Quote Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.