Jump to content

La Jacinthe 1825 by aviaamator - 1:20 - schooner


Recommended Posts

On 4/2/2018 at 3:48 AM, aviaamator said:

For some time he was not engaged in the construction of the model, because it is impossible to remain indifferent when people die in the fire, small children... There are no more words, only work helps to distract a little from this tragedy. I wish everyone good health!!!

At first I couldn't believe the scale of the tragedy - then to find the litany of safety defects that caused the death and injury toll to be so high arose from simple greed. Appears to be everywhere you turn now- I had difficulty reading the text messages but particularly the one from the little girl trapped in the Cinema to her Parents outside. Rest little children.

Link to comment
Share on other sites

  • 2 weeks later...

good looking sails - very nice.

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Link to comment
Share on other sites

Aviaamator,

I will follow your sail making with lot of interest because I am preparing to make sails for my shrimper as well.  I have also never worked with a sewing machine. I could certainly use an assistant like Jung.

The small metal rings to sew around the holes seem me very handsome. Can you show how you put them in place?

 

I wish you a speedy recovery,

 

G.L.

Link to comment
Share on other sites

I use thin-walled copper tubes used by electricians to make eyelets. With the help of a curved metal rod, I unfold the walls of the tube. Then, with the help of a knife, my little helper Andrew cuts off part of the tube of the desired length. Shilom pierce hole in the sail, insert the grommet, then using a cone and a light hammer fix the eyelet. If you have more questions - please ask me !

DSC07197.JPG

DSC07198.JPG

DSC07199.JPG

DSC07200.JPG

DSC07201.JPG

DSC07202.JPG

DSC07203.JPG

DSC07206.JPG

DSC07207.JPG

DSC07209.JPG

Link to comment
Share on other sites

Hello Aviaamator,
Thank you for the informative presentation on the production of sails.
That's a very good performance.
To the width of the cloths of the sails I can inform you that these at the La Creole have a width of about 60 cm.

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...