Hubac's Historian Posted November 25, 2019 #871 Posted November 25, 2019 The tops look fabulous, EJ. They convey the sense of scale that I’m after, myself. Old Collingwood, popeye the sailor and EJ_L 3 Quote We are all works in progress, all of the time.
Old Collingwood Posted November 26, 2019 #872 Posted November 26, 2019 Amazing work - so precise and tidy. OC. EJ_L and popeye the sailor 2 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
popeye the sailor Posted November 27, 2019 #873 Posted November 27, 2019 hi there EJ.........marveling the progress you've made since I last looked in. ratlines and rigging looks great masting is really nicely done as well ! looking really good Old Collingwood, BLACK VIKING and EJ_L 3 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
EJ_L Posted December 4, 2019 Author #874 Posted December 4, 2019 Thank you all for the kind words and all the likes. I’ve completed another stage with the installation of the mizzen mast, top, topmast, shrouds and ratlines. With that, all three mast now stand proud and I can work on the topmast rigging and prep for topgallants. Im hoping to get home from work early enough one evening this week to take some pictures of the entire model as she sits now in natural light. If I can’t get home in time then Saturday looks clear so far. Would like to see her in better lighting than my model room. Old Collingwood, american, marktiedens and 4 others 7 Quote "A Smooth Sea NEVER made a Skilled Sailor" - John George Hermanson -E.J. Current Builds - Royal Louis - Mamoli Royal Caroline - Panart Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery La Couronne - Corel - Build Log & Gallery Rattlesnake - Model Shipways, HMS Bounty - Constructo Plastic - USS Constitution - Revel (twice), Cutty Sark. Unfinished - Plastic - HMS Victory - Heller, Sea Witch. Member : Nautical Research Guild
md1400cs Posted December 4, 2019 #875 Posted December 4, 2019 NIce E.J. as was mentioned your tops are perfectly scaled. Lower shrouds and rats are "just right". Chainplates look excellent as well! Regards, Elijah, EJ_L, popeye the sailor and 1 other 4 Quote Michael Current build : Sovereign of the Seas 1/78 Sergal Under the table: Golden Hind - C Mamoli Oseberg - Billings 720 - Drakkar - Amati Completed: Santa Maria-Mantua -- Vasa-Corel - Santisima Trinidad cross section OcCre 1/90th Gallery : Santa Maria - Vasa -
Elijah Posted December 4, 2019 #876 Posted December 4, 2019 Very nice, I can't wait to see her in natural lighting! EJ_L, popeye the sailor and Old Collingwood 3 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
EJ_L Posted December 7, 2019 Author #877 Posted December 7, 2019 As always, thank you all for the likes, comments and following along. This past week was another big milestone in the build. Not only did I finish the lower mast rigging, the build itself rolled over 3 years and 1,900 hours! This has been a long journey and I know some of you have been with me on it since the beginning. I still have a lot to do, but the end is drawing ever closer. Baring some unforeseen interruption, I'm thinking I might just get her finished in 2020. Well, the weather mostly held, bit windier than I would have liked but sunny and beautiful otherwise, so I was able to get some outside pictures of her. Enjoy! Time for me to get back to making topmast stays. john_weiman, Elijah, marktiedens and 11 others 14 Quote "A Smooth Sea NEVER made a Skilled Sailor" - John George Hermanson -E.J. Current Builds - Royal Louis - Mamoli Royal Caroline - Panart Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery La Couronne - Corel - Build Log & Gallery Rattlesnake - Model Shipways, HMS Bounty - Constructo Plastic - USS Constitution - Revel (twice), Cutty Sark. Unfinished - Plastic - HMS Victory - Heller, Sea Witch. Member : Nautical Research Guild
Hubac's Historian Posted December 7, 2019 #878 Posted December 7, 2019 You know, it is so great to see her in natural light, where all of the extra detailing work you have done really pops, EJ. You really have done an incredible job of transforming this kit into something so much better than the sum of its parts. I really love your top work, and as I’ve said before - the shrouds and ratlines are top-notch! EJ_L, popeye the sailor, md1400cs and 2 others 5 Quote We are all works in progress, all of the time.
GrandpaPhil Posted December 7, 2019 #879 Posted December 7, 2019 Excellent! EJ_L, popeye the sailor and Old Collingwood 3 Quote Building: 1:200 Russian Battleship Oryol (Orel card kit) 1:64 HMS Revenge (Victory Models plans) 1:64 Cat Esther (17th Century Dutch Merchant Ships)
american Posted December 7, 2019 #880 Posted December 7, 2019 Gorgeous!!! Certanlly worth the time! EJ_L, Old Collingwood and popeye the sailor 3 Quote
john_weiman Posted December 7, 2019 #881 Posted December 7, 2019 Looks great. Old Collingwood, EJ_L and popeye the sailor 3 Quote
Snow Posted December 8, 2019 #882 Posted December 8, 2019 Great looking ship What are her dimensions Just beautiful Cheers snowy EJ_L and popeye the sailor 2 Quote
EJ_L Posted December 18, 2019 Author #883 Posted December 18, 2019 Sorry for the delay in responding and updates, I’ve kept meaning to get on here and then would get distracted. Thank you all for the likes and comments. As always, they are welcome and encouraging. As for her size, she is approximately 42 inches long, and when topped out she will be 36 and inches tall with a width at the longest yard of 18 inches. This truly is a massive model that I have yet to decide where her final berth will be... A problem I will hopefully have to tackle in 2020. This update brings topmast work. Fore stays are in place on fore main and mizzen with shrouds done on fore and main, mizzen shrouds underway and ratlines to follow. popeye the sailor, american, GrandpaPhil and 6 others 9 Quote "A Smooth Sea NEVER made a Skilled Sailor" - John George Hermanson -E.J. Current Builds - Royal Louis - Mamoli Royal Caroline - Panart Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery La Couronne - Corel - Build Log & Gallery Rattlesnake - Model Shipways, HMS Bounty - Constructo Plastic - USS Constitution - Revel (twice), Cutty Sark. Unfinished - Plastic - HMS Victory - Heller, Sea Witch. Member : Nautical Research Guild
Old Collingwood Posted December 18, 2019 #884 Posted December 18, 2019 Excellent work EJ. OC. EJ_L and popeye the sailor 2 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Hubac's Historian Posted December 19, 2019 #885 Posted December 19, 2019 I am watching your rigging sequence with great interest; so far, so taught! EJ_L, popeye the sailor and Old Collingwood 3 Quote We are all works in progress, all of the time.
EJ_L Posted January 6, 2020 Author #886 Posted January 6, 2020 A lot of work for this update. All of the topmast shrouds are complete with ratlines strung and backstays set. Next up up will be work on the topmast caps and then setting the topgallant masts as well as topping out the mizzen with its flagstaff. GrandpaPhil, popeye the sailor, Hubac's Historian and 6 others 9 Quote "A Smooth Sea NEVER made a Skilled Sailor" - John George Hermanson -E.J. Current Builds - Royal Louis - Mamoli Royal Caroline - Panart Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery La Couronne - Corel - Build Log & Gallery Rattlesnake - Model Shipways, HMS Bounty - Constructo Plastic - USS Constitution - Revel (twice), Cutty Sark. Unfinished - Plastic - HMS Victory - Heller, Sea Witch. Member : Nautical Research Guild
testazyk Posted January 6, 2020 #887 Posted January 6, 2020 Really looking good--what advice do you have for ensuring the masts are all perfectly straight and aligned? It looks like you are building them up as you go. I like that approach but it makes keeping everything straight a challenge. Hubac's Historian, Old Collingwood, EJ_L and 1 other 4 Quote Tom Current: Sergal Sovereign of the Seas Previous builds: AL Swift, AL King of the Mississippi, Mamoli Roter Lowe, Amati Chinese Junk, Caesar, Mamoli USS Constitution, Mantua HMS Victory, Panart San Felipe, Mantua Sergal Soleil Royal
EJ_L Posted January 6, 2020 Author #888 Posted January 6, 2020 Thanks Tom and thank you to all those who have hit the like button. Honestly, I do a lot of eye balling alignment on the masts. Any side-to-side lean can be easily seen by viewing the masts in line from forward to aft and vice versa, for more exacting, I will use a straight edge and make sure that it touches all three masts as it passes them. A simple square will usually take care of ensuring plumb as well. In looking at alignment of the masts fore and aft (viewed from the side) this gets trickier. Most ships have a rake to their mast of 1-5 degrees (the masts leaned aft so that when the sails were full, they would not pull the masts past 90 degrees vertical). This adds a challenge as a simple square is no longer usable. I will typically fashion a miter gauge out of card stock that is cut to the degree I want my masts set at. I make them for each ship and each mast so that they will fit the build. With deck furniture, gratings etc. it can be hard to get a normal tool in place or to get a true reading off the deck. I will cut the card to fit around and over any deck items and once I have a flush fit, I can draw the angle I want the mast to slope at and cut the card to alignment. After using this to set the lower mast, the upper masts can be aligned using a straight edge. I recommend doing as much of this as possible early on before too much of the deck furniture is in place. Use alignment marks on the deck and masts to help make repositioning easier. To me, the harder part comes in when adding the rigging lines as they can pull masts out of alignment as tension is applied. Work them as evenly as possible, forward and aft, port and starboard and always monitor the opposite side of the one you are working on. I've had to redo plenty of shrouds when I spin the model around and see a mast pulled far to one side. Old Collingwood, Hubac's Historian and popeye the sailor 3 Quote "A Smooth Sea NEVER made a Skilled Sailor" - John George Hermanson -E.J. Current Builds - Royal Louis - Mamoli Royal Caroline - Panart Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery La Couronne - Corel - Build Log & Gallery Rattlesnake - Model Shipways, HMS Bounty - Constructo Plastic - USS Constitution - Revel (twice), Cutty Sark. Unfinished - Plastic - HMS Victory - Heller, Sea Witch. Member : Nautical Research Guild
testazyk Posted January 6, 2020 #889 Posted January 6, 2020 Thanks E.J.--some great suggestions there and I really appreciate it. Hubac's Historian, EJ_L, popeye the sailor and 1 other 4 Quote Tom Current: Sergal Sovereign of the Seas Previous builds: AL Swift, AL King of the Mississippi, Mamoli Roter Lowe, Amati Chinese Junk, Caesar, Mamoli USS Constitution, Mantua HMS Victory, Panart San Felipe, Mantua Sergal Soleil Royal
md1400cs Posted January 7, 2020 #890 Posted January 7, 2020 E.J., Just catching up - Woa your ship looks awesome outdoors in natural light. I'm still so impressed with all of those well detailed carvings - great addition to your skill set. Lower standing gigging and stays also look just right. Cheers, EJ_L, popeye the sailor and Old Collingwood 3 Quote Michael Current build : Sovereign of the Seas 1/78 Sergal Under the table: Golden Hind - C Mamoli Oseberg - Billings 720 - Drakkar - Amati Completed: Santa Maria-Mantua -- Vasa-Corel - Santisima Trinidad cross section OcCre 1/90th Gallery : Santa Maria - Vasa -
EJ_L Posted January 26, 2020 Author #891 Posted January 26, 2020 Completed the standing rigging this past week and the masts are now topped out at full height. With that work complete I have moved on to working the yards and sails. Made templates for all of the sails on graph paper to test for size and fit. Now I will transfer them to cloth and begin sewing. I am also going to add the details to the yards themselves as well as blocks and such to prepare them for the sails. I am leaning towards a combination of set and furled sails but we will see. american, Old Collingwood, marktiedens and 8 others 11 Quote "A Smooth Sea NEVER made a Skilled Sailor" - John George Hermanson -E.J. Current Builds - Royal Louis - Mamoli Royal Caroline - Panart Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery La Couronne - Corel - Build Log & Gallery Rattlesnake - Model Shipways, HMS Bounty - Constructo Plastic - USS Constitution - Revel (twice), Cutty Sark. Unfinished - Plastic - HMS Victory - Heller, Sea Witch. Member : Nautical Research Guild
BLACK VIKING Posted January 26, 2020 #892 Posted January 26, 2020 Wow just caught up with your build, stunning as always m8 Martyn EJ_L, Hubac's Historian, Old Collingwood and 3 others 6 Quote
Old Collingwood Posted January 26, 2020 #893 Posted January 26, 2020 Truly excellent work. OC. Hubac's Historian, CDW, EJ_L and 3 others 6 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
EJ_L Posted January 31, 2020 Author #894 Posted January 31, 2020 Attaching blocks to yards. I plan on trying my hand at sewing sails this weekend. We shall see how that goes. BLACK VIKING, american, Old Collingwood and 5 others 8 Quote "A Smooth Sea NEVER made a Skilled Sailor" - John George Hermanson -E.J. Current Builds - Royal Louis - Mamoli Royal Caroline - Panart Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery La Couronne - Corel - Build Log & Gallery Rattlesnake - Model Shipways, HMS Bounty - Constructo Plastic - USS Constitution - Revel (twice), Cutty Sark. Unfinished - Plastic - HMS Victory - Heller, Sea Witch. Member : Nautical Research Guild
Old Collingwood Posted January 31, 2020 #895 Posted January 31, 2020 1 hour ago, EJ_L said: Attaching blocks to yards. I plan on trying my hand at sewing sails this weekend. We shall see how that goes. Yep, thats the stage I have been at this weeks on the pearl. OC. BLACK VIKING, md1400cs, popeye the sailor and 1 other 4 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
EJ_L Posted February 1, 2020 Author #896 Posted February 1, 2020 (edited) Picked up a book that has been on my wish list for some time now and I feel like a fog has been lifted and can see much clearer now. I will echo what many others have told me and that is this is a must have for any historic model sailing ship builder. A wealth of information and very clear drawings with excellent details. I really wish I would have had this book years ago. Edited February 1, 2020 by EJ_L Hubac's Historian, Old Collingwood, CDW and 5 others 8 Quote "A Smooth Sea NEVER made a Skilled Sailor" - John George Hermanson -E.J. Current Builds - Royal Louis - Mamoli Royal Caroline - Panart Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery La Couronne - Corel - Build Log & Gallery Rattlesnake - Model Shipways, HMS Bounty - Constructo Plastic - USS Constitution - Revel (twice), Cutty Sark. Unfinished - Plastic - HMS Victory - Heller, Sea Witch. Member : Nautical Research Guild
md1400cs Posted February 1, 2020 #897 Posted February 1, 2020 E.J, Been away the last couple of weeks – been following on my iPad, but forgot my login info haha – now back at home so I can post again to builds that I follow 🤔 Nice updates. Liked your yard supports haha Yes that book is great - So sails - well that will be a new challenge good luck - could be the most difficult bits to get right unless you keep them all furled then much easier IMO. PS: as you know they (sails) add huge amounts of work adding many lines and blocks - then finding enough pins to locate the ropes - have fun my friend. Regards, Old Collingwood, EJ_L and popeye the sailor 3 Quote Michael Current build : Sovereign of the Seas 1/78 Sergal Under the table: Golden Hind - C Mamoli Oseberg - Billings 720 - Drakkar - Amati Completed: Santa Maria-Mantua -- Vasa-Corel - Santisima Trinidad cross section OcCre 1/90th Gallery : Santa Maria - Vasa -
EJ_L Posted February 2, 2020 Author #898 Posted February 2, 2020 Sails are indeed a major undertaking especially with no rigging plan or supplied materials, but I think the effort will be worth while. This is my first ship with cloth sails. I’ve done the former plastic ones on my Constitution build but cloth does add extra challenges. Success! After learning how to use a sewing machine, some trial and error, I have a set of sails. I still need to clean them up and add details etc., but I have sails. More to follow. Elijah, CDW, md1400cs and 7 others 10 Quote "A Smooth Sea NEVER made a Skilled Sailor" - John George Hermanson -E.J. Current Builds - Royal Louis - Mamoli Royal Caroline - Panart Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery La Couronne - Corel - Build Log & Gallery Rattlesnake - Model Shipways, HMS Bounty - Constructo Plastic - USS Constitution - Revel (twice), Cutty Sark. Unfinished - Plastic - HMS Victory - Heller, Sea Witch. Member : Nautical Research Guild
popeye the sailor Posted February 4, 2020 #899 Posted February 4, 2020 love the looks of her out in the light.......they always look better in their natural habitat great progress and the sails look very nice........I remember my first time on a sewing machine. as the admiral says......I'm still learning md1400cs, Old Collingwood, EJ_L and 2 others 5 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
Hubac's Historian Posted February 4, 2020 #900 Posted February 4, 2020 Sails look very good, EJ! Old Collingwood and EJ_L 2 Quote We are all works in progress, all of the time.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.