Slowhand Posted January 25, 2022 #241 Posted January 25, 2022 Just stumbled across this, what a wonderful build, are you using lime for the planking? And I guess you used a scroll saw for the bulkheads. Quote Slowhand, Current build - Polacca scratch build from Amati plan previous builds San Martin - Occre H.MS Resolution - Corel Half Moon - Corel Dragon keel boat - Billings
CRI-CRI Posted January 27, 2022 Author #242 Posted January 27, 2022 Preparation of the upper quarter-badges (the rails continue below without interruption) : The false windows line will be convex to advance the middle finishing of quarter-gallery bruce d, GrandpaPhil, yvesvidal and 5 others 8 Quote
CRI-CRI Posted January 27, 2022 Author #243 Posted January 27, 2022 On 1/25/2022 at 7:39 PM, Slowhand said: Just stumbled across this, what a wonderful build, are you using lime for the planking? And I guess you used a scroll saw for the bulkheads. Hi Slowhand, Thanks for your kind remarks 😁 I used a Proxxon for adjusting planks, I've always done all my models with only this tool, without any lime : The bulkheads were cut with a scroll saw, and gun-ports at each plank, with the small steel saw illustrated, well following the draw : Regards, Christian Archi, GrandpaPhil, Slowhand and 2 others 4 1 Quote
CRI-CRI Posted January 29, 2022 Author #244 Posted January 29, 2022 Following work about upper quarter-gallery : GrandpaPhil, bruce d and mtaylor 3 Quote
CRI-CRI Posted January 30, 2022 Author #245 Posted January 30, 2022 Today work about false windows of upper quarter-gallery : mtaylor, chris watton, Matt D and 4 others 7 Quote
CRI-CRI Posted February 1, 2022 Author #246 Posted February 1, 2022 Cuting each decorative side, before the "royal head coronation" : GrandpaPhil, mtaylor, davyboy and 2 others 5 Quote
CRI-CRI Posted February 1, 2022 Author #247 Posted February 1, 2022 End of cuting and gluing the decorative sides of the quarter-gallery, with general view of the result : davyboy, GrandpaPhil, ccoyle and 6 others 8 1 Quote
Roger Pellett Posted February 1, 2022 #248 Posted February 1, 2022 Beautiful Work, Christian! It looks like the fun is about to begin; all of that elaborate carving. Roger mtaylor 1 Quote
CRI-CRI Posted February 2, 2022 Author #249 Posted February 2, 2022 Macro in artificial light, without flash, the figure of my little King is 5 mm high (my poor eyes are tired 😁) : davyboy, Ian_Grant, yvesvidal and 5 others 6 2 Quote
mtaylor Posted February 2, 2022 #250 Posted February 2, 2022 Beautiful carving. By all means, give your eyes a break. Mine get crossed just thinking about something that small. Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
CRI-CRI Posted February 3, 2022 Author #251 Posted February 3, 2022 Following works about upper quarter-gallery : davyboy, Ian_Grant, chris watton and 4 others 7 Quote
CRI-CRI Posted February 3, 2022 Author #252 Posted February 3, 2022 Some improvements about wooden colors of back-stern : bruce d, Ian_Grant, chris watton and 8 others 9 2 Quote
CRI-CRI Posted February 5, 2022 Author #253 Posted February 5, 2022 Adding hand-made upper wooden frieze (eight parts glued) : davyboy, Hartron, ccoyle and 3 others 5 1 Quote
CRI-CRI Posted February 5, 2022 Author #254 Posted February 5, 2022 A new part has been just a moment installed : ccoyle, Archi, Roger Pellett and 9 others 12 Quote
Matt D Posted February 5, 2022 #255 Posted February 5, 2022 Beautiful work, Christian! Your carvings are a joy to see. CRI-CRI and mtaylor 2 Quote Current Build: HMS Winchelsea 1:48 (Group Project) Completed Builds: Virginia 1819 Artesania Latina - 1:41
CRI-CRI Posted February 5, 2022 Author #256 Posted February 5, 2022 Some pics with the sunset precious light : GrandpaPhil, davyboy, Brinkman and 4 others 6 1 Quote
CRI-CRI Posted February 6, 2022 Author #257 Posted February 6, 2022 Following work about the great-cabin gallery of the back stern : GrandpaPhil, mtaylor, bruce d and 3 others 6 Quote
CRI-CRI Posted February 7, 2022 Author #258 Posted February 7, 2022 Each new step can I see the result in progress, and it's the most pleasant experience for a modeller : Archi, GrandpaPhil, oneslim and 3 others 5 1 Quote
CRI-CRI Posted February 7, 2022 Author #259 Posted February 7, 2022 A new test with colored back-ground of the upper part of the quarter-gallery : oneslim, Archi, ccoyle and 6 others 9 Quote
mtaylor Posted February 7, 2022 #260 Posted February 7, 2022 Your carving work is fantastic. bruce d and CRI-CRI 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
CRI-CRI Posted February 8, 2022 Author #261 Posted February 8, 2022 Upper part of the quarter-gallery both sides done : davyboy, Archi, ccoyle and 6 others 9 Quote
CRI-CRI Posted February 9, 2022 Author #262 Posted February 9, 2022 Beginning following work at side of back stern : davyboy, oneslim, Archi and 5 others 7 1 Quote
CRI-CRI Posted February 12, 2022 Author #263 Posted February 12, 2022 As said a british Prime Minister, it is'nt the end of beginning, but, perhaps, the end of beginning : mtaylor, Archi, davyboy and 5 others 8 Quote
CRI-CRI Posted February 13, 2022 Author #264 Posted February 13, 2022 Someone asked me why I don't use the 3D printed accessories of decoration provided by E-shop My answer is that I prefer entirely wooden self made objects, because my model is without paint : mtaylor, bruce d, Roger Pellett and 6 others 7 2 Quote
CRI-CRI Posted February 13, 2022 Author #265 Posted February 13, 2022 Left side of the back-stern with finished wooden parts (not glued) : mtaylor, GrandpaPhil, Archi and 4 others 6 1 Quote
CRI-CRI Posted February 13, 2022 Author #266 Posted February 13, 2022 I also plan to include a printed Saint Philippe's monogram inside the lateral frames : VTHokiEE, GrandpaPhil, mtaylor and 3 others 5 1 Quote
CRI-CRI Posted February 14, 2022 Author #267 Posted February 14, 2022 Printed Saint Philippe's monogram were glued inside the lateral frames : VTHokiEE, ccoyle, mtaylor and 5 others 6 2 Quote
CRI-CRI Posted February 15, 2022 Author #268 Posted February 15, 2022 The two sides of the back-stern with finished wooden parts glued (I am happy...) : Ian_Grant, bruce d, GrandpaPhil and 2 others 5 Quote
Roger Pellett Posted February 15, 2022 #269 Posted February 15, 2022 You should be happy! Nice work! Roger mtaylor and CRI-CRI 2 Quote
mtaylor Posted February 15, 2022 #270 Posted February 15, 2022 Yes... be happy and maybe a happy dance on finishing the back stern. Wonderful work. CRI-CRI 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.