EdT Posted October 21, 2013 Share #61 Posted October 21, 2013 Hi Rob, Nice work. Aside from altering the stern and stem, do you make any modifications to the hull shape, or accept the profile of the Revell hull? How do you go about doing this? Ed Quote All EdT posted material Copyright 2016 Edward J Tosti Young America - extreme clipper 1853 Young America POB Version Modeling the Extreme Clipper Young America Vol 1 1:60 HMS Naiad 1797 The Naiad Frigate Vol I The Naiad Frigate Vol II1:96 Victory Link to comment Share on other sites More sharing options...
rwiederrich Posted October 21, 2013 Author Share #62 Posted October 21, 2013 Oh...I'll complete it...I began it before I finished the Ferreira..and now I need to focus on her before I set to delve into the Glory again. I'll poke around on her but I have to finish something. And I'm struggling with the new build of the Medium clipper Donald McKay...so I have to slow down...focus..focus. Thanks for the fine comments and encouragement. Rob Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
rwiederrich Posted October 21, 2013 Author Share #63 Posted October 21, 2013 Well Ed...this is the trick. I model, making the most corrections as stated earlier(Stem/stern). Namely the bearing lines are corrected and such.. As far as the depth of the hold is concerned and the flatness of the bottom...I opted to go with the Revell design. Nobody I know would ever know the slight difference in bottom flatness between the two anyway. But most importantly, is the design of my dioramas many of the ships I build are set in. The Glory was a generally flat bottomed design unlike the CS..however that slight error is generally lost to the general observer... Where as the major(below waterline differences) are disguised by the modeled water I set my ships in. No below waterline changes will be made for my Donald McKay build..since she will be modeled in a heavy sea with those differences hidden by design.. The real modifications come above the waterline. Thanks for commenting. Rob Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
rwiederrich Posted November 5, 2013 Author Share #64 Posted November 5, 2013 (edited) I'm impressed.... and finally we have several clippers being represented here on these build logs...to date: The Young America.. The Ariel..My Glory of the Seas and....the masterfully built Lightning. And not to forget..the several logs of the Cutty Sark. I think this is the most clippers represented in quite a while......and it also appears that 2 *Donald McKay's* will be entered the Frey in the future as well. What fun to see such a diverse collection of clippers.....wooden merchant ships of this period where built for a specific reason...*Speed*. a short but mighty career. Great forum. Rob Edited November 6, 2013 by rwiederrich mtaylor and NenadM 2 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
rwiederrich Posted November 8, 2013 Author Share #65 Posted November 8, 2013 (edited) To keep up with the build..I thought I'd show you what the composite masts look like on these American made clippers. Here is a simple drawing of how they were put together. I built these masts for my version of Glory of the Seas. Edited November 8, 2013 by rwiederrich Elia, popeye the sailor and mtaylor 3 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
rwiederrich Posted November 21, 2013 Author Share #66 Posted November 21, 2013 Some closeup of the gunnel and deadeyes... druxey, popeye the sailor, robin b and 10 others 13 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
Elia Posted November 22, 2013 Share #67 Posted November 22, 2013 Rob, Very nicely done. Quite impressive. You've got more deadeyes on that one channel than my Arethusa has on either of her entire sides. Cheers, Elia Quote Elia Rose Valley, PA Arethusa: 1907 Gloucester Knockabout Link to comment Share on other sites More sharing options...
EdT Posted November 22, 2013 Share #68 Posted November 22, 2013 Nice work, Rob. Ed Quote All EdT posted material Copyright 2016 Edward J Tosti Young America - extreme clipper 1853 Young America POB Version Modeling the Extreme Clipper Young America Vol 1 1:60 HMS Naiad 1797 The Naiad Frigate Vol I The Naiad Frigate Vol II1:96 Victory Link to comment Share on other sites More sharing options...
bhermann Posted November 22, 2013 Share #69 Posted November 22, 2013 I'm impressed.... and finally we have several clippers being represented here on these build logs... Rob - I have been enjoying the resurgence of clipper models also. Thanks for sharing your build with us. If I ever get Bluenose finished, I'll be adding my Flying Fish kit to the mix. The box is sitting in the corner trying to tempt me to open it and do more than just study the plans and read the book! Keep up the great work - love the work you are doing. Bob Quote Current build -- MS Bluenose Future build - MS Flying Fish "A ship is safe in harbor, but that's not what ships are for." - William G. T. Shedd Link to comment Share on other sites More sharing options...
rwiederrich Posted November 22, 2013 Author Share #70 Posted November 22, 2013 Thanks guys....I'm not as attentive as most and surely not as skilled........I tend to build ships that have spent time in the weather..and at the hand of working men. As soon as my Ferreira build is finished...I'll surely get back to the Glory. Rob Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
rwiederrich Posted November 27, 2013 Author Share #71 Posted November 27, 2013 (edited) A bit more history of the Glory of the Seas: She was built in 1869 and had a successful and varied career..which extended over 53 years..far beyond many of her contemporaries. She did not end up wrecked, or set afire by accident , or lost do to foundering. She lived to an old age and as many old sailing ships, was passed from one profit making toiling job to the next...and each less honorable and dignified then the previous. Nope...an old salty girl who ran her life's course to where she had no more profit to give. Once nearly saved from the wreckers hand by a preservation society that turned out to be nothing more then a sham. Parts of her found themselves in private collections...a ship model was even fashioned from her state room door. Her Figurehead was saved by a wealthy passerby and is now saved and on display in the India House club in NY. She was driven ashore on a marbley beach at Endolyne, South of Seattle...and in 1923 was burned for the metal in her hull. As of 4 years ago at low tide you could still see remains of her if you have a keen eye(I personally plan a trip there soon to attempt to recover a souvenir, if at all possible to be honorably displayed next to her model. I have found(in my collection) another quite rare image of her on that beach south of Seattle.....taken the day before she was burned...as you can see her beautiful figurehead has already been removed and saved for posterity. Rob. Edited November 27, 2013 by rwiederrich robin b, avsjerome2003 and popeye the sailor 3 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
michael mott Posted November 27, 2013 Share #72 Posted November 27, 2013 Rob on page 211 of the book "the great Age of Sail" there is a photograph of the Glory of The Seas in almost the same attitude only at the beginning of her life just before she was launched. Michael Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it. Link to comment Share on other sites More sharing options...
rwiederrich Posted November 27, 2013 Author Share #73 Posted November 27, 2013 Yes..that is a very famous image...kinda weird that her beginning image and her end are not that different in perspective. You can clearly see the fullness of her hull compared to more extreme versions of the clipper design. popeye the sailor and avsjerome2003 2 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
rwiederrich Posted November 27, 2013 Author Share #74 Posted November 27, 2013 (edited) Here she is in Tacoma freshly back from Alaska...and shortly before she was stripped of any value on her then burned. She still retains her beautiful figurehead...and her stunning lines. These images have been priceless sources of information for my build. Rob Edited November 27, 2013 by rwiederrich robin b, dave teel, popeye the sailor and 2 others 5 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
Sailor1234567890 Posted November 29, 2013 Share #75 Posted November 29, 2013 Rob, Is it just me or do I recall you mentioning at some point that you'd like to build Great Republic by bashing together two CS hulls? I have neither seen nor heard about this plan since. Any news on it? I look forward to seeing Glory as well. Beautiful ship. Excellent work. Quote Link to comment Share on other sites More sharing options...
rwiederrich Posted November 29, 2013 Author Share #76 Posted November 29, 2013 Yes.....I did put that idea into the planning stages.....since then I chose to tackle the Donald McKay first. I am tackling the logistics of such a modified build...... It will require 3 Cutty Sark hulls and ample hull modifications. The McKay will(Like my ferreira build) be an open water diorama ...where the hull below the waterline will be unseen...there for no mods will be needed. Rob(thanks for asking) Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
rwiederrich Posted April 30, 2015 Author Share #77 Posted April 30, 2015 (edited) Sometimes I don't know if I'm coming or going. I kinda feel like Ole Donald McKay myself with the anxious anxiety of a new build fogging my view...long before I have finished the ship I'm currently working on. After working on the clipper Donald McKay for a time...and finalizing a home move...I finally spent some quality time rigging and fitting out the Glory of the Seas foremast yards. To include lift rigging, jackstays, Flemish horses, stirrups and footropes. Before I affix them to the mast...I must return to finishing the port side foot ropes. I spent much of last night rigging them on the shrouds. I intend to fashion the Jacobs ladders as well during this stage. It appears I have created for myself a nightmare(If such can be considered to be so). I'm on the brink of finishing ....totally...the Barkentine Ferreira ...(aka Cutty Sark). few odds and ends. I'm a third way through the mast construction on the Clipper Donald McKay. I'm slinging along on the mainmast yards and backstays of the clipper Glory of the Seas. And... I'm laying the deck for the new construction on the clipper Western Shore. I forgot to take images...so I'll try that soon. Rob Edited April 30, 2015 by rwiederrich mtaylor 1 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
Sailor1234567890 Posted May 2, 2015 Share #78 Posted May 2, 2015 You know the rules, no pics, it didn't happen. mtaylor 1 Quote Link to comment Share on other sites More sharing options...
rwiederrich Posted May 11, 2015 Author Share #79 Posted May 11, 2015 I have anew computer that has no photo software loaded on it so I'm working to remedy that . Hopefully soon. Rob Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
rwiederrich Posted May 12, 2015 Author Share #80 Posted May 12, 2015 Got to working on some ratlines on the Glory and I rigged the mainmast yards. Still lots of ratlines to finish..but coming along. riverboat, Marcus.K., tadheus and 2 others 5 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
rwiederrich Posted May 19, 2015 Author Share #81 Posted May 19, 2015 (edited) One of my dreams have come true today. I was able to go to the pyre site of the Glory of the Seas.....and at an extreme low tide..did indeed find the remains of my favorite clipper ship. I then excavated several portions of the iron pins used to fashion the timbers together(No timber survived). These iron pins were roughly 1.5" and some over 3ft long. I procured several portions..one crusted nearly fully and the rounded form head was barely visible. Being nearly 100 years old....they are brittle and after preservation I will mount them along with my model of the vessel. 8 years ago there was more to be found...she is nearly completely vanished from view and from memory. I saved my piece of the *Glory* and can't be any more excited. I have an actual piece of the Glory of the Seas and it will rest proudly and preserved with the model of her namesake. Rob(How many people can say that?) Edited May 19, 2015 by rwiederrich capnharv2, mtaylor, riverboat and 3 others 6 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
rwiederrich Posted May 19, 2015 Author Share #82 Posted May 19, 2015 Was able to return to the Glory and I spent some time working on the port ratlines archjofo, capnharv2, NenadM and 10 others 13 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
rwiederrich Posted November 10, 2015 Author Share #83 Posted November 10, 2015 Doing research has its benefits...and one of them is discovery. I had come across several and paintings of the Glory that I didn't knew even existed. And like the Young America thread I too have found *NEW* images. When the Glory was run aground south of Seattle..I was only made recently aware of other photographs of her. This is an amazing image. A beach view. archjofo, popeye the sailor, ggrieco and 3 others 6 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
rwiederrich Posted November 10, 2015 Author Share #84 Posted November 10, 2015 And like the Young America painting I found...this rendering of Glory of the Seas is just as breath taking IMV. popeye the sailor, mtaylor, druxey and 4 others 7 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
rwiederrich Posted November 10, 2015 Author Share #85 Posted November 10, 2015 Sometimes archived images are in private hands and are hard to gain access to. These last photographs are revealing. ggrieco, markjay, dave teel and 7 others 10 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
dgbot Posted November 10, 2015 Share #86 Posted November 10, 2015 I just came upon your log. You have done a great job. Kudos to the research you have done. David B mtaylor 1 Quote Work in progress USS Maine in cardstock.http://modelshipworld.com/index.php/topic/7446-uss-maine-by-dgbot-hmv-card/#entry220003 Completed Blockade runner Teazer http://modelshipworld.com/index.php/topic/6063-blockade-runner-teazer-by-dgbot-card-stock/#entry175967 Completed The Monitor Lehigh http://modelshipworld.com/index.php/topic/6920-the-monitor-lehigh-by-dgbot-card-model/#entry203680 Completed Kingston Class MCVD http://modelshipworld.com/index.php/forum/10-kit-build-logs-in-progress/ Link to comment Share on other sites More sharing options...
rwiederrich Posted November 10, 2015 Author Share #87 Posted November 10, 2015 Thanks David. The rigging is slow going. Unlike most scratch builds.. (Made entirely of wood), mine is of a composite nature. I use all medium to complete my ships. Rob mtaylor 1 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
douglaspbrown Posted January 28, 2016 Share #88 Posted January 28, 2016 Great build! mtaylor 1 Quote Link to comment Share on other sites More sharing options...
rwiederrich Posted February 8, 2016 Author Share #89 Posted February 8, 2016 Thanks Doug..after becoming a grandpa, again...I had taken a break on the Glory...but I hope to return to her to finish up her ratlines and begin the tedious work of rigging her yards and ironworks for them. Rob mtaylor 1 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
riverboat Posted February 15, 2016 Share #90 Posted February 15, 2016 Beautiful work Rob.....love your techniques!!!! Frank mtaylor 1 Quote completed build: Delta River Co. Riverboat HMAT SUPPLY USRC "ALERT" in progress: Red Dragon (Chinese junk) Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.