Jump to content

Recommended Posts

Posted (edited)

Altough Gianna is a smal ship 110 blocks are needed. 

 

I made the violin blocks konventionel from one piece of wood.

The others are glued up from layers of 1mm walnut stripes. 

One of the ready single blockstripes

 

post-17190-0-70190600-1422804183_thumb.jpg

 

post-17190-0-07029100-1422804207_thumb.jpg

 

The result is a smal frame from walnut.

 

post-17190-0-63701700-1422804217_thumb.jpg

 

The slices for the smal blocks are made from 3mm soldering wire. 

 

post-17190-0-00303200-1422804229_thumb.jpg

 

The slices for the other blocks are made from 4mm brass.

 

post-17190-0-80253000-1422804267_thumb.jpg

 

post-17190-0-94138900-1422804286_thumb.jpg

 

post-17190-0-16741200-1422804303_thumb.jpg

 

Milling the groove for the blockstrops

 

post-17190-0-58776000-1422804326_thumb.jpg

 

 

The results after some times of sanding

 

post-17190-0-37253900-1422804338_thumb.jpg

 

 

post-17190-0-66168900-1422804352_thumb.jpg

 

post-17190-0-33131800-1422804373_thumb.jpg

 

post-17190-0-23110200-1422805384_thumb.jpg

 

post-17190-0-00596900-1422804390_thumb.jpg

 

Regards  Hartmut

 

 

 

  

 

 

 

 

 

Edited by Angarfather

on the : Staatenjacht Utrech

 

At last finished:

Gianna a Pinco Genovese

HMS Agamemnon

  • 2 weeks later...
Posted

Hello Angarfather,

you are doing a great job!

 

I recently found this painting of a genovese pinco, dated around 1700 and I remembered your WIP.

It represent the pinco named "Nostra Signora dell'Acquasanta" (more or less: "Our Virgin Mary of the holy water") during a fighting against two Ottoman ships (possibly an ex-voto?).

 

I thought that it can be of interest, since you are in the rigging step and since it is an original source of informations.

 

In addition (but it is too late to be of interest for you) the other two photos represent an original model dated around 1780-1820 of a pinco.

This model is owned by the Naval Engineering Dept. of the University of Genova.

 

I hope that the provided material can be of interest for your model building.

 

 

 

post-1071-0-62040000-1424298502_thumb.jpg

post-1071-0-30621700-1424298523_thumb.jpg

post-1071-0-27173500-1424298535_thumb.jpg

    Done:          Venetian Polacre http://modelshipworld.com/index.php?/topic/7290-venetian-polacre-by-cristiano-sec-xviii-from-original-drawings/

                              Halifax  http://modelshipworld.com/index.php?/gallery/album/844-halifax/

                              Ranger  https://modelshipworld.com/gallery/album/2175-ranger-revenue-cutter-by-corel/   

                              HM Bark Endeavour (Corel kit heavily kitbashed) : http://modelshipworld.com/index.php?/gallery/album/125-hmbark-endeavour-corel-kit-bashed/                                              

 

                             Venetian Galleon (from scratch) - Pirate Junk - Sicilian Speronara (from scratch)

On the shelf (still packed):     Artesania Le Hussard....

Posted

post-17190-0-97043400-1424643226_thumb.jpg

 

The boomtackles of the mizzen boom.

 

post-17190-0-46930900-1424643255_thumb.jpg

 

post-17190-0-70642200-1424643297_thumb.jpg

 

The anchorshanks and arms are made from 3mm PVC foam 

 

post-17190-0-09046700-1424643369_thumb.jpg

 

The anchorstocks are from wallnut and the hoops from 1,7mm soldering wire

 

post-17190-0-00553600-1424643411_thumb.jpg

 

The served anchorrings

 

post-17190-0-50941500-1424643552_thumb.jpg

 

post-17190-0-87646800-1424643435_thumb.jpg

 

The blocks of the latinyard hallyards: seven sheave blocks at main and fore mast, trebleblocks at the mizzen

 

post-17190-0-32068900-1424643995_thumb.jpg

 

Pincos crew are only six hands and the skipper. Therefore they used such big tackles to work with the latin yards.

 

Regards Hartmut

on the : Staatenjacht Utrech

 

At last finished:

Gianna a Pinco Genovese

HMS Agamemnon

Posted (edited)

Some pics from modelling pincos dinghy

 

I have used a plaster cast as base to make the frames

 

post-17190-0-31145000-1425314204_thumb.jpg

 

The frames  

 

post-17190-0-51065100-1425314247_thumb.jpg

 

Planking and so on

 

post-17190-0-13013800-1425314330_thumb.jpg

 

post-17190-0-74662300-1425314357_thumb.jpg

 

the maststep

 

post-17190-0-72345300-1425314457_thumb.jpg

 

thwarts

 

post-17190-0-09072400-1425315150_thumb.jpg

 

Ready for painting

 

post-17190-0-53200700-1425314845_thumb.jpg

 

Kindly Hartmut

 

 

 

 

Edited by Angarfather

on the : Staatenjacht Utrech

 

At last finished:

Gianna a Pinco Genovese

HMS Agamemnon

Posted

Thanks to Patrick and all who "liked" it.

 

I had sails on a model 12 years ago. But a latin rigged ship without sails looks a little bit poor to my eyes. Fortunately my Admiral sewed the sails! I am very clumsy in needlework.

 

 

post-17190-0-67728200-1425507571_thumb.jpg

 

post-17190-0-77147300-1425507583_thumb.jpg

 

post-17190-0-70538100-1425507595_thumb.jpg

 

post-17190-0-98623300-1425507608_thumb.jpg

 

post-17190-0-15267800-1425507620_thumb.jpg

 

Best regards Hartmut

 

 

on the : Staatenjacht Utrech

 

At last finished:

Gianna a Pinco Genovese

HMS Agamemnon

  • 2 weeks later...
Posted

Thanks, mates!

 

There was a mistake in bounding the mizzensail. I have bounded it invert!!!! A half hour of work, and the problem was quit.

 

Here are three pics. from the seven sheat blocks of the mainyard.

 

post-17190-0-00116600-1426267194_thumb.jpg

 

 

post-17190-0-64248300-1426267204_thumb.jpg

 

 

post-17190-0-03080000-1426267215_thumb.jpg

 

Kindly Hartmut

on the : Staatenjacht Utrech

 

At last finished:

Gianna a Pinco Genovese

HMS Agamemnon

Posted

Hartmut,

 

thats a wonderful model, it is very well done I`m curious what the other sails will look like, must be a beautiful sight, judging by that mounted aft sail, and your wife did a good Job on the sewing, I also like the carvings and the leaf Gold plated decors

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Posted
Posted

Hartmut,

 

lucky you, to have such a talented sailmaker, regards to your wife she does a great Job on laying out and  sewing the sails

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Posted

Looks great with the sails Harmut !

And a job well done from your Admiral....

You are living not so far from where I live so.....when I need sails I know where to go to  :D  :D  :D  :D  :D  :D  :D

 

Sjors

Posted (edited)

Thanks. John.

You are right. Two sails, finishing the dinghy, and some details ( Cargo - barrels- sacks) and Gianna is ready.

Kindly Hartmut

 

P.s. The next build is in preparation, so it's time to finish the Gianna.

Edited by Angarfather

on the : Staatenjacht Utrech

 

At last finished:

Gianna a Pinco Genovese

HMS Agamemnon

Posted

Ahoy, Mates,

 

post-17190-0-49041500-1427058271_thumb.jpg

 

 

Modelling is more to me than just craftmansshipp, it is always a little dreaming.

 
Some of the images are from this beautiful dream world.
 
post-17190-0-97044200-1427058284_thumb.jpg
 
 
post-17190-0-51290000-1427058304_thumb.jpg
 
 
post-17190-0-44348300-1427058320_thumb.jpg
 
 
Best regards Hartmut

on the : Staatenjacht Utrech

 

At last finished:

Gianna a Pinco Genovese

HMS Agamemnon

Posted
Posted

Thanks, Patrick!

 

There are to projects. First will be the Statenjacht Utrecht. I have got two wonderfull books over this ship and scratch building the modell from SeawatchBooks. 

 

Furthermore, I do research on plans for a galleon from the time of Queen Elisabeth1.

 

Cheers Hartmut

on the : Staatenjacht Utrech

 

At last finished:

Gianna a Pinco Genovese

HMS Agamemnon

Posted

 

Ahoy, Mates,

 

attachicon.gifIMG_1166.JPG

 

 

Modelling is more to me than just craftmansshipp, it is always a little dreaming.

 
Some of the images are from this beautiful dream world.
 
 
 
 
 
 
 
Best regards Hartmut

 

 

 

Congrats Hartmut,

 

your Pinco Genvese is looking beautiful, and with these well done lateen sails, a real enrichment to the "MSW fleet"

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Posted

Thanks to Nils, all the Likes!!!

 

Tody I had to takel Giannas  jibsail. Before that I had to turn some belaynails. 3mm ramin is a good material for this job.

 

post-17190-0-48102000-1427230959_thumb.jpg

 

post-17190-0-13052700-1427230969_thumb.jpg

 

And here the nails in place

 

post-17190-0-23282900-1427230983_thumb.jpg 

 

Gianna with all sails

 

post-17190-0-43629600-1427231000_thumb.jpg

 

post-17190-0-15687600-1427231017_thumb.jpg

 

post-17190-0-59677500-1427231075_thumb.jpg

 

Next days I will modell all the little parts like cargo and finish the dinghy.

 

 

Cheers  Hartmut

 

 

on the : Staatenjacht Utrech

 

At last finished:

Gianna a Pinco Genovese

HMS Agamemnon

Posted

lovely Dinghi Hartmut,

 

Color scheme also great looking

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...