TBlack
-
Posts
1,279 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by TBlack
-
It depends on the wood used to fabricate the blocks. Basswood won't do. But any hardwood should be ok. Using a pin vise and a #78 drill should work all right. I'm guessing on the drill size, but #75-80 should do it for your needs at 1:64. Tom
-
Thanks, Keith A. I can't help myself. If I'm going to work on something it has to be as good as I can give. BTW, you have been my mentor in many ways over the years. If my efforts pass your inspection, I'm good to go! Tom PS. See this guy, my grandson, next to me? He just had his 11th birthday today 4/19. I need to change my photo. -
Keith, No, just that he bought it in Kennebunkport years ago. And just to be clear, yes, I’m making this boat better than it deserves. In return I get to try out techniques without worrying that it will harm Uncle Jon’s enjoyment. For example, I’ve cut two gears, using my rotary table for the first time, and cut two bushings for the anchor winch moderately successfully. And, you haven’t seen it yet, there is a bracket to hold the boom to the mast which is in 7 parts all needing soldering. So, I’m gaining confidence that one day I will be at your level of accomplishment. Tom PS If you’d like to take over as prime contact for our uncle, I can give you his email.
-
When I started this project I thought the hull was sacrosanct (don't alter!). Now I'm sorry I didn't take a scalpel to it. Nevertheless, I'm working around its imperfections. Today I decided it needed a cap rail, so installed one. I think it makes the boat more "finished". Tom
-
Glue question
TBlack replied to Peanut6's topic in Building, Framing, Planking and plating a ships hull and deck
Hi Kev, I, too, use the titebond, but the yellow stuff. It's more water resistant. I find that 20 minutes is a good wait time. And while you're waiting, can't you be preparing the second plank or work on some other part of the model? Tom -
Thanks, Keith. Now to figure out how to glue it all together! And perhaps add a pawl. Tom
-
OK, now attempting to produce an anchor bitt and seat for the bowsprit. Here's where I am so far: Nothing is glued; just placed to get the relationship and make sure stuff is lined up.
-
I, too, have a 10" Rockwell Delta saw (for 50 years!) and have not worried about kerf loss, but I've never spent $100 on a 2' piece of wood. I'm learning a lot about saw blades and Thin Rip guides. Tom
-
Don, What's the diameter of the rod? And the scale? I'm assuming you have a lathe, and that you've incorporated the various rings, etc. in the profile? Tom
-
Keith, For you. Everything just placed for photo. I added the skylight; not on the plans, but too dark below w/o. May have to move it slightly to starboard to allow for dinghy on port side.
-
John, Maybe, the brass screw cost $2.00! Tom
-
Next comes the building of the stovepipe. Supposed to look like this: First step: buy a brass screw: Second step, cut down the top: Third step, cut off the threads: Fourth step, drill out the center: F Fifth step, create vents: sixth step, make a pattern for the top seventh step, fold and solder: eighth step, attach to pipe: Finally, paint flat black, and install.
-
INVITATION TO A LIVE-STREAM EVENT
TBlack replied to kurtvd19's topic in NAUTICAL RESEARCH GUILD - News & Information
Sounds interesting. Thanks, Kurt, for getting us included. Tom- 1 reply
-
- 2
-
-
Well, I meant whistle along with. It makes the task easier, and besides, if you're whistling, you can't swear.
-
Lute music.....I sorta like Schumann myself. Gives me an opportunity to sing along.
-
Michael, Do you remember the model of the Vinal Haven that you helped me build? The hull plan came from the Mystic Museum and also had a “do not reproduce” stamp on it. I called the museum to ask for permission to copy for my own purposes, and it was readily given. Interestingly, the copy shop paid no attention to the stamp! Tom
-
I have done as much as I can to the cockpit. Now to move forward. BTW, it occurs to me that Keith Aug's build of the Altair is at the same scale as this model. Fortunately, I don't have to deal with the same metal hardware; still, he manages to inspire me.
-
CMC, I think you should PM Kirby who has built this craft. You guys might have things to share. Tom
-
I'll join the rest of us in amazement, but also I notice the Goupilles (pins) box that wasn't bought just yesterday. Together with all the brass and wood you seem to have stored around, your inventory must be enormous! Tom
-
Having dealt with "deck furniture" so long, you are eager to do something new and different. And isn't that what keeps us going through the whole process? Keith, do you ever look back at the beginning? You are turning this piece of wood from folk art to a piece of history. Bless you! Tom
-
I've been making a little progress, albeit fits and starts. The difficult part of the companionway hatch is behind me, and the rudder need staining. But the challenging parts, I think, are done. Although, in the bow is a winch which requires a gear and pawl. I know that the gear feature has been done many times, so I'll just copy if I can remember where they are on this site (?).
-
Michael, Now I get it. A lot of careful, exact filing comes next! TB
-
USF Essex by mtbediz - FINISHED - 1:50
TBlack replied to mtbediz's topic in - Build logs for subjects built 1801 - 1850
Mustafa, OK, I got it. What kind of wood do you use for the wheel? Tom, -
USF Essex by mtbediz - FINISHED - 1:50
TBlack replied to mtbediz's topic in - Build logs for subjects built 1801 - 1850
Mustafa, Recognizing the language barrier, I'll try to be brief. Your pictures of the wheel construction (post 49) start with the wheel (ring) already made. I'dlike to know how you made the wheel (ring). Tom Black
Our Emblem ®
