Jump to content
MSW Spring Donation Drive

TBlack

NRG Member
 View Profile  See their activity

  • Posts

    1,126

  • Joined

  • Last visited

 Content Type 

Everything posted by TBlack

  1. TBlack
    Michael, I'll stick my neck out here (I'm not an aesthetic kind of a guy) and agree with John on the lower coaming given where it's placed. The reason for it is to keep water that washes down the deck from coming into the cockpit, so how high does it need to be? Tom
  2. TBlack
    I think that turned out just fine. Are you telling us that RC is out completely, or just for this build? Oh wait! Is there any water in Arizona to float anything? (just kidding) Tom
  3. TBlack
    Michael, is that you in the bo'sun chair taking the picture?
  4. TBlack
    OK. If Michael, Greg, Bob, John, and Popeye think the cockpit surgery was an improvement, so do I, although now there's no place to sit. Tom
  5. TBlack
    Flying Dutchman, I was just in a Rockler store this afternoon and saw that they have 1/8" dowels (and larger) in various hardwoods. Furniture makers use them in their joinery work. You've mentioned Woodcraft, now Rockler, there must be others that cater to home woodworkers. Tom
  6. TBlack
    It looks to me like the stern plating has the "oil canning" effect. Very realistic. Did you do that, or does the kit come that way? Tom
  7. TBlack
    Michael, Good news and bad news? Too bad the owner of Floss wouldn't respond. I think that's kind of tacky. But good news that you have found an actual boat to model. No speculating! Any possibility that you can travel to see the boat yourself rather than rely on the owner to get just the right picture? Tom
  8. TBlack
    Pete, I, too,am in awe of your work. But I'm getting a little confused. In your posting #129 there are 3 lobster smacks in the picture, but I thought the scratch built boat was hull #3 and it looks like it's really boat #4? BTW, if I had to choose, I'd go for the boat with the brightwork hull and white boot topping. I really like the colors. Tom
  9. TBlack
    Pete, Nice work, so far. You'll certainly end up being the resident expert on lobster smacks! I didn't quite understand why you needed to strengthen frame #1 and stain/varnish it. Will it be visible? Oh, and does anyone in CDA understand what you're building? Tom
  10. TBlack
    Michael, If my brass work passes muster it's because you taught me how. Andy, For the blowdown muffler, I tried your hand drill method which worked much better, much cleaner. John, Cap't Slog, Andrieke, thanks for looking in and your support. I have to put some more braces on Amanda, so my attentions will be redirected for awhile. Tom
  11. TBlack
    So I added the whistle and "steam blowdown muffler" to my funnel assembly. Except for some cleaning up and painting here it is:
  12. TBlack
    That eyebrow looks fabulous! John and I both want to know how'd you pull that off so smoothly? Tom I see I posed my question at the same time you answered. I'll keep quiet next time. But I'm shocked! Shocked! that a sailor would swear!
  13. TBlack
    Andy, Some time ago I looked at the portholes that you put in your superstructure and marveled at their roundness, figured you just drilled them out. Fast forward to my build of Vinal Haven where I had to put a hole through styrene to acommodate the pipe for the whistle. The heat from the drill melted the plastic such that I ended up with a hole bigger than I intended. Easy enough to fix, but did you do something differently to avoid the problem? Tom
  14. TBlack
    Andy, Those windows came out gloriously! Not easy to cut so many parallel lines. Bravo Zulu! Tom
  15. TBlack
    Michael, Just painted field stone, a typical New England foundation. My greatest aspiration is to, one day, have a shop above ground. I see so many pictures here of shops with BIG windows...I'm very envious. Tom
  16. TBlack
    I haven't kept this log current, largely because there isn't much new or different in the way I'm approaching the rigging. The only real issue has been the stuns'l booms which are one continuous spar laid on top of the yardarms. That makes it difficult to provide proper rigging in hanging the yard on the mast, but I managed. On yeah, and the halyards, at this scale, were a pain in the neck. Try threading 2mm double blocks and keeping the lines from twisting! After this, 1:96 will look huge. At this point I need to rig the braces, hang the anchors, coil the lines.
  17. TBlack
    Michael, Fabulous idea! Nice looking subject; I hope you're able to get the information you need for your satisfaction, although the photo of Skipjack gives you quite a bit of information. This model will be about 28.5" long? With working engine? That build will be fun to watch, although I can't envision a crankshaft out of a bicycle chain! Tom
  18. TBlack
    Jay, I love your videos. Yes, they are informative, but they are also very well produced. Micro-mark sells the silver solder paste that Bob mentions. It comes in a small tube. Tom
  19. TBlack
    John, Preiser has a wonderful looking eagle, but it's part of a set. The set costs $22.00. Maybe Andy and I could do a deal wherein I buy the set, take out the eagle, and sell him the rest of the set for his railroad club for $20? Sounds fair? Tom
  20. TBlack
    Pete, My aunt owns one of these, built in Eastport, Me. I think. I've sailed it a number of times. A mighty fine craft; good and solid; lots of mahogany. I'll certainly be following your progress. Did you decide on a scale? (sorry, just read the headline, duhh!) Tom
  21. TBlack
    Andy, Steam blowdown muffler? Who woulda thunk it! Anyway, it's good to have you around. Google produced this How about it?: Tom
  22. TBlack
    OK, I'll take all these likes as an endorsement of my decision to follow Adrieke's suggestion. Great, but we're really not there yet. I still have some accoutrements to deal with around the funnel. Steam escape valve: On the left, what do you suppose that really looks like. The whistle on the right is no problem. Tom
  23. TBlack
    Adrieke, This is a fabulous find, and thank you very much for the lead. Initially, I was intrigued by the tutorial on building my own eagle, but then realized they were trying to model the real bird. Of course, I'm modelling a casting of an eagle. I think the way to go is with the musket miniatures offering; the price is certainly right. Tom
  24. TBlack
    Thanks, Andy, I looked at their sites and didn't see any eagles available. I think Michael's idea of the jewelry lead is a strong possibility. There's a lot to look at in that category, some very expensive and some (from China) not bad, but wholesale. While the price is right, I really don't want to end up with 90 eagles when I only want one! Tom PS I'm thinking about changing my avatar. That baby is now 3 years old. And I think Robbyn has changed hers twice in the last 3 months. Stand by!
  25. TBlack
    Mark, These are terrible pictures because my camera is quite rudimentory, but perhaps you can get the idea. The eagle is 3 dimensional and probably about 12 mm beak to tail feathers in profile and 10 mm at its widest. Tom

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...