.jpg.7e80607770d9078b2f0b470e8c9c33ac.jpg){kind=spacer}
CDW
-
Posts
7,717 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by CDW
-
Thanks JCT. Appreciate that encouragement. -
Two of the best friends I ever had were both sergeant majors, both US Army Airborne. Both were veterans of WW2, Korea, and Vietnam. Lots of wisdom from those two and better friends one could never have.
-
Another great looking model for your display cabinet. Beautiful, colorful, paint and markings.
-
Wow Jessie, I had to look at that top photo three or four times before I realized it was your model. It looks like the real thing! Beautiful.
- 1,306 replies
-
- 9
-
-
- syren
- model shipways
- (and 1 more)
-
Oh yes, they are perfectly suited for use as a wash. Their composition is what we used for many years prior to today's wealth of pre-made wash products.
-
It's their product number 87140. Essentially, it's a turpentine and dark ochre oil mix. (I should have said "burnt umber" mix)
-
Thanks James. It's my first Wingnut Wings kit and so far, am very impressed with their attention to detail and quality.
-
Looks great OC. How are those masts holding up to the tensioning created by all the rigging? They look nice and straight.
-
I had a big crush on Gayle McCormick in 1969. Such a babe, and what a set of pipes! Her voice was ever bit as strong as Janice Jopplin.
-
Here is the new technique I tried. Step 1 - Paint "plywood area" with a base coat of Tamiya flat white. Step 2 - Make irregular brush strokes with yellow ochre ink over the primed area. Step 3 - Blend ink (after 10 minutes drying time) using a brush dampened with water and maintain irregular brush strokes. Step 4 - Coat of Tamiya clear yellow. Step 5 - Coat of Tamiya clear orange. Step 6 - Coat of Tamiya clear. In retrospect, next time I will make my ink strokes heavier and a little more profound to show the "grain" a little better. I may have gone a little too heavy on the yellow and orange clear coats. Learning experience.
-
I am stunned at those reduced prices. What a deal.
-
Thanks Ken. No, WnW hasn't done Spads yet, but I'll bet they will eventually. For now, go for a Roden kit of the Spad. They do it in 1:32. Not sure of fit and finish but should be good.
-
I think the finishing touch is the Tamiya dark brown wash at the end. It tones down the bright metal finish and blends it all together.
-
I got lucky - the placards came on the decal sheet. Thanks!
-
I'm going to be using inks and water colors (pencil water colors) to reproduce the plywood look of the Albatros airframe. I've seen master modelers do it and it looks quite convincing. Me?, who knows how it will come out but I'm going to give it a try anyway. I'll first be laying down a primer coat of Tamiya flat white (I already did that tonight and let it dry), then the inks go on second with some fancy brush work, some stray water color pencil, then Tamiya clear yellow, then clear orange, then regular clear. Phew!
-
Thanks Lou. I like listening to a variety of music, but blues and rock are my favorites. I'm going to try some techniques when I paint this model I've never tried before. We'll just have to wait and see how it comes out cause I really don't know.
-
Sweet Mossie! How did I miss this thread until now? Looking forward to this tribute to your dad. Check out this video by Kermit Weeks. He is a local aviation enthusiast and owns a fleet of vintage WW2 and WW1 aircraft, including this Mossie. He flies them almost every day, too.
-
Beth Hart is so hot, she's smokin'...
-
Thanks for those kind words, OC. Here are my final pictures for today. Wish my lighting was a tad better.
- 165 replies
-
- 14
-
-
Base color is Tamiya rubber black. Detail colors are Mr Color aluminum, iron, and gold. Aluminum and iron colors are dry brushed on over the rubber black. Other various colors are Tamiya.
- 165 replies
-
- 14
-
-
.5mm i.d. brass tubing and very fine soft copper wire was used to create spark plugs and spark plug wiring. The basic engine has been assembled and is now ready for paint.
- 165 replies
-
- 11
-
-
And the early version of the modern bomber was the B-35, which is older than the Ho-229. The USA issued contracts for the plane in 1941, long before the war ended and any HO-229's were known of.
-
Glad you're aboard Denis. Squadron has a surprisingly small inventory in stock for a major distributor. As many know, Squadron is MMD, the well known hobby distributor in the USA. "Just-in-time" ordering is the new normal, so warehouses just don't keep inventory on hand like they did at one point in time. While I've never owned a large business who had to be concerned about things like these, it's my understanding businesses pay taxes on inventory in stock, so they try to avoid that as much as possible.
-
Oh no! Say it ain't so. I can't look...my budget is busted as it is for the rest of this month, and I won't spend any money on a credit card. For us in the USA, mid April is the filing deadline for our federal taxes and income tax return. Mine is due.
-
Maybe you could try some Lycra thread. It stretches without putting a lot of pressure on the plastic parts and easily retains it's tension over time. Plastic ship and aircraft modelers use it all the time.
- 90 replies
-
- 2
-
-
- bomb ketch
- pyro
- (and 1 more)
Our Emblem ®
