svein erik

Yes it need some work,  but I wil do try it out,  my next build is the 1/4 cheerful so it Mayby good for this model,

so wen I get the tool home I wil see if I can get the pin off maby make it small or have different sizes 😊

Svein.erik 

Thanks for all the good way's for making pins😊

but first I wil try the Beadsmith-one step looper tool (1,5mm) you can get 2,25 and 3mm also.

Svein.erik 

Yes I did also feel so,

here is a photo of the corronades with 2.5mm Canon ball , it fitts😁

Working my way in to .... dekk fittings 

weel from syrenscompany. The pumpe is nerly finish etc,

but I did drill the hull for the Canon ball ,eeee it sems to look to small so I try with bigger 2.5mm 

and tested it in to the 18 punds corronades from cadlecraft  (it fitts )

Maby I use this insted 😊

Hanks chazz

Do you have a photo?

Svein.erik

I have to do some mor test 

so I did find some pins from artesania kit I had and tested with to sorts of blackening liquid, 

I did also try it on a tube from K&S (the result speek from it self)

The pins I have from ME (syren kit) has to be made from ....... it is crapy 😲

Hi chris 

no I havent, but t think I wil do so, but I think I need a nose pilers thats nerow to make them small

to match the 1/64 scale 😊

Svein.erik 

Hi 

Dos anyone know's were the kit eyepins from ME is made?

the brass eyepins thats comes with the syren kit Seems to be different or crapy one,

I have dunn the blackenig befor with good result, but this time it Seems to not stikk 

I did try acid dip first and so on... but its turn out the same 😲( I used carr's)

Svein.erik 

Thanks😊 thats wat I was looking fore, 

am waiting for the book , lennarth petersson about rigging.

but I like the photo,now I can see how it looks😊

Svein.erik 

Hi Jim

I think I did find it out ,

a sling on the yard , this wil be atatch to a bigger sling from the tristletree 

then a rope is run true the blocks opp around the tree true som mor blocks 

something like that.... Se photo

Svein.erik 

Hi a questions about the rigging of the main/fore lower course yards  (brig syren )

There is a block where the sling is ( sling cleats) 

Is this rigged be side the sling or is this one of all?

Svein.erik 

Some info of the ship

Svein.erik 

Hi, and thanks again for the liks, 

am trying out my New tool, so I started making some mast

the main and fore lower course yards 

I thing it looks nice when rigg😊

Svein.erik 

Hi folks😊

The syren is coming a long now, the hull /copper plates are now looking old and used 

may needs some repers soon on the slip,  LOL

I did also finish the conpanionway construction 

left the dor out for now so I dont damige it. Everything is not glue to the dekk yet.

Svein.erik 

Thanks for the likes

am now ready to mill my own planks an other stuff,

and also the lathe for the mast 😊

the tool is proxxon! 

Svein.erik 

Yeee,  I have finish the copper plates now , Wat a task 😊

I also made a New stamp for the dressing belt etc

and am happy with the outcome since its my first time to copper plates 😊

Thanks for the comments Jim and sal

I wil try to use a roller😄

I wil post photo wen the copper plates are finish 😊

Svein.erik 

Dam this is a nice pice 😊

did the center board have an open space on each side to

let the water run true ?

Svein.erik 

Thanks for that Thomas

Am just back from a trip and ready to copper again , finish it

but it Seems to me the plates a slipping 😲

I used sanding sealer befor I started the task maby it was a wrong idé? 

And I have also only used gloves for this task.

Svein.erik 

Hi everyone 😊

Befor I take the task of finishing the copper plates 

I needed a brake, so I pre made some dekk fittings  (not finish yet)

Gratings  are from syrenshipsmodellcompany 

Svein.erik 

Finish 😅 one side,  more to go before the copper plates is dunn!

Svein.erik 

Ups!! I think something went wrong here🙊🙈🙉

Thanks for the liks everyone, 

my plating is going forward, it was much easier then I belive, but am not finished yet

I hope my curve on the plates is going g to make a problem to me, specialy at the bow!

Svein.erik

Thanks for the liks and comments 

I started the copper plating now , its my first time for this 

and I hope it goes well😉

Svein.erik 

Thanks for that Jim 

The dekk needs more cleening, but  do that later wen the last nails are dunn 

I wil drill some hulls on both ends of the hatches .

Svein.erik