svein erik

Hi am back from my trip in Berlin an did some history movment,

thanks for the liks and kind works

am also back in the Shipyard and working on some more planks so in a day ore 2,3,4 

The best from svein.erik 

Sitting in Berlin airport back to Norway fond a little hollydays 

I did some more planking (before the trip) 

am using the boxwood plank on the 2 belts so I can have all this plank all over the lower canyter

Svein.erik 

Thanks  all

I did replase the pin stripe tape with trhead and lineing out the hull 

It looks ok to me at this time 

Svein.erik 

Thanks 😊there are 3 planks inkl the garboard planks (5/32 and 2 planks 1/8)

and you ar spott on , my baw looks something from hear to there😲

I have post some photo erlier of the hull before I plank the upper dekk (upgrade wood castello boxvood )

 but am not sure about planking the garboard  befor I line of the hull 

I my have to take it off and line off the hull 

make new garboard using the tic marks?

Svein.erik 

Thanks for all the likes

am at stage where am lineing off the hull, but an not convince am there 

so if you have a feedback please let me know 

Svein.erik 

And something else I forgot to say😲

the upper plank  (black) is in the photo 1/32×5/32 I diddent have 1/8 

I yust sand it down to match 1/32×1/8

Svein.erik 

Thanks for the liks 

I yust finish all the treenail and the wales 

I have also painted the wales and stern with 10 cotes ,but more needed for later

I need to get the plank under the wales on board and the garboard plank before I line off the rest of the hull

Svein.erik 

Hei yes it was that I was thinking about doing

nails with heads painted black but it wil be so many nails about  450 yust on the wales 

it wil look a bit strange 

so I deside to skip it and leve it yust like it is 

Svein.erik 

Hi  thanks for the likes

wat did I recive today?

Chuck's english navy cutter cheerful , my fingers want to start 

but I do need to wait 

Svein.erik 

This is wat am thinking about doing to the wales 

brass nails scale down to fit

but am ?????😲

I can do this 3 ways so it dosent get to be over killing on this

wat do you thing??

Svein.erik 

Thanks for the kind works and likes

This is my last photo for know , I have to start all over again (the other side )😊

I have painted in chucks spirit😉

there are 10 layers of thin paint ( mars black akryl from winsor )

After all planking job is dunn I wil paint the rest and many more layers 

so I gess I will start nailing again😨

Svein.erik 

Hi

did some more work (the wales)

I pre painted the first upper wails board using chuck metod 

thin layers of paint, for now there is 10 layers 

and it looks real good , there will be more When I paint the intire wales

Svein.erik 

Thanks fore the likes

I yust finish of the treenails on baboard side 

using walnut wood filler an yust rubb it on part by part 

sand it and t works well ,but not on bad wood !!!

the nex task is the wales 

Svein.erik 

Thanks you all

Som treenails are made and I used walnut filler

aply som water to se how it works 

it looks ok ore?

Svein.erik 

Hi again 

Finish the transom and put 2 more 5/32 planks for the wales but not the 2 ones , it will be dunn later

I also define the lines for the treenails  (74 lines) +

There will be 2 nails in ech plank yust for the fun of it😲 (prototype has one)

1480 + nails on 1 side 

I also took a photo of  a test using round headed metal nais  and reduce it to fitt the scale  (about)

this is fore the wales 

Svein.erik 

Hi and tanks for the likes,

dunn some more work 

planking of the baboard side is also dunn and am at the start of the stern, 

The sanding in not dunn yet but its coming nicly together 

I will Soon begin the treenails,  for this I will use walnuts color with light oak finish 

Fore the Wales I maby using round headed metal nais ( I maby the first to do this on the syren)

Svein.erik 

Its a beauty 😄 

Svein.erik 

Tanks for the likes 

the planking job is going well and after upgrade the wood to castello boxvood 

am not using basswood again 😊

the portside is dunn and am turning over to starboard side 

Svein.erik

Hi 

the planking job is know on its way, and as always the fun part is first or not😨

Svein.erik 

Yes, Know I have recive my castello boxvood from wood project source 

and Soon am starting the syren project 

maby today 😲? 

Svein.erik 

Hallo ja enda en viking 

jeg er fra sola 

så får vi snakkes mer etter hvert😆

Svein.erik 

Its a good answer and respected  to chuck 

Best regards

Svein.erik 

Its in the bag, but were do you get the rope from if I can ask?

Svein.erik 

Hi am nerly back on the syren build

thanks for the liks 

now back to wat am doing,  am still waiting for the castello boxvood planks, butt I started to get the sheet line in order and am

happy with the outcome 

I did also mesure the wale planks 3 stk.5/32 and 1 plank 1/8 on the botten wale.

Then I started to line off the hull 

am going to plank the syren hull with the spiling teknick,  and yes the hull is getting copper plates butt am going to do this as a practice so I can do this on a hull without copper plates later.

I think this is going to be fun😇

Svein.erik 

Hi

yes, I just get the rigging blocks from syrenshipsmodellcompany today

and as always its a beauty 😄

so am still waiting for the castello boxvood from wood project source 😳😡

so I can start the planking 

Svein.erik