svein erik

A little update on the syren ship

The main rails are know on board on, I also dunn the scroll at the stern but

insted of the gap where the ship name is I install a 1/8 plank so the name is going in this (later) 

is something new.

Svein.erik 

Thanks for the likes😊 but no comments on the nailing the wil, LOL

I havent drill the hole yet so I have some time to deside,

there are no syren like this yet.

I do like to do experimenting,  its only my Mother in law's ship🙊

Svein.erik 

Thanks for the liks, 

I did look at Alexey Domanoff  (how to make small nails with round head)

But I used a file for this , it works. So I make a sample, posted it on the wales 

Yust to see how it looks.

erlier I did or maby wanted to install this to the wales but it diddent work at that time, so with this metod it can?

it may not be historycal correkt but it make the wales come to life, the nails on the photo is a bit to large and if I do this I wil use brass wire, in this case I yust used wat I have, black wire 

Wat do you think? 

Svein.erik 

Grait idé,  I was looking for this😲 I did try it out on a black wire 

but I used a needel file and it works 😊 

Wat a beauty, I hope I get mine like this😊 I do have some work left

Svein.erik 

Am know back to my syren model,  

working with the for and aft gunports,  making hinges using chuck's mini kit 

its dam small but its work. "  Do use chuck's gide for making this"

Svein.erik 

Nicly dunn job and a grait model

I hope chuck has the starter packages ready Soon,  😆

Svein.erik 

A master job, as always ☺

Svein.erik 

Thanks dave,  

I do like the laser dott to simulate the nails patten 😊

I May have to order a kitt from you, haha😊

Svein.erik 

Huston I have a problem 😲

Looking at the cast metal for the stern gallery, it looks like $$$$#@(:.............

so am thinking I have to make some New ones

I have numbers of fitting items from artesania latina, and am going to use them 

I have to cut off the top an bottom , this is in scale and then make some Windows etc

Aa, I am ost forgot,  Chuck I need some New ankers 😲

Thanks for the liks everyone 

am in to the build again 

so I started to do the fillers for the cap rails and ...... the pre made caprail  did not fitt this time and I Wonder why 😲

I then started to do I it over but this time I use not boxvood but basswood 

I used 1/32 insed of 1/16 but in to layers to get the thickness and it works well,  

I did also make the pin rails  (boxvood ) 

and I working know on the main rails cut out of boxvood sheet 

I did steel Dubs ide for the rails , cut them up in lenght using a hook scarf 

Svein.erik 

A grait work , I wil follow this build 

Svein.erik 

Thanks for  the  liks,  am finish for know,

got most of the tools in the box, under my work space I have 32 boxes 

and 16 holes with bigger box etc to use on my other work space.

I have som close cabinet for bigger items to

and I know can see my confederacy too😄 I do also have 2 long boats in the box and the starter kit cheerful from syren (chuck)

Its time to get started on the syren😉

Svein.e 

Hello everyone, am know back from hollydays and ready to modeling😀

but I did have to rebuild the shipyard  ( chuck making so grait kits😆)

So I need more rom to build them😉 the nex thing to do is to organize all the tools

All the heavy stuff is in a hobby rom nex to the garage so I have a dust fri space.

Best

Svein.erik 

Hi and good luck with the build,I also have all the plans but I have not build ship like this yet,

so I May have to wait a bitt😲

I wil follow this build

Svein.erik 

If this is the case, I want inn😊

Svein.erik 

17 hours ago, Chuck said:

You can still start a build log and join the online group.   It will be available to everyone however when I start cutting the first kits, they will be reserved for those in the group.  I wont even list them on my site until everyone in the group project has received their kit or starter package.

I wil wait for the kit but i do like to have them both 

So og can stand side by side 😊

A question about this build?

Is this only for a group or is this build for all how wants to play for this kit?

Am alone so no grop is availebul 

Svein.erilk

Maby you have a photo to

Svein.erik 

Hi, have you try to glue the pin ?

Svein.erik 

Thanks for that Rich, 

and something else, the cabel thats coming out of the hull is to use 

To pickup the pico led cable  later 

and wil be conekted to the cable under the dekk, 

so no cable wil bee seen.

Svein.erik 

Thanks for the liks, 

I did also made a test for a lamp , using basswood 

I wil make this in boxvood later (need 5 pices) 

2 inside the bulwarks , 2 in the mast , 1 for the capt.figure holding it 

and 1 down below cabin (do Not need a lamp here)

Am using pico leds 

Svein.erik 

Yeee,

wel I did nerly finish the bulwarks planking  befor my flight😎

I do have to sand it and trim the gunports 

Svein.erik 

Welcome to the syren build 

and enjoy the build☺

Svein.erik 

Hi and thanks for the likes

Am know taking a hollyday and the trip goes to auer apartment in cypros

But i wil be looking in the sites from there 😎

Best regards 

Svein.erik