Gregory

It's a matter of personal preference once you realize that model rope is what you want and not the stuff that usually comes in kits and looks pretty much like string, or thread.

Here is some of BenD's rope..

The different types will behave differently as far as flexibility and their ability to retain moisture..

Nylon is probably not a good idea IMO as it is generally more rigid and glossy..

I have come to prefer polyester and make my own rigging line.

Lot's of rope discussion here:

https://modelshipworld.com/forum/82-discussions-about-rope-making/

I'll PM you..

5 hours ago, Laggard said:

2. Anyone willing to accept Venmo to send me a few blocks?  I can’t spend 10 bucks just to get blocks to replace the broken ones. 
 

Thanks

What is a few? What size? ( 3mm? )

Are you concerned about the blocks matching the ones you already have?

I have a stash of typical kit blocks and I could possibly send you a few..

As far as cost, my time and trouble would be worth more than 10 bucks, but I have been known to help fellow modelers without expecting 

any more compensation than the knowledge they will pass it on should the opportunity present itself.

With regard to Allan's suggestion, here is a simplified process for making your own blocks..

The quality would be superior to most kit provided blocks, and you would have a process to take forward in your modeling endeavors.

Do they let you order from Amazon in Wisconsin?  😁

Sphinx would be a great preamble for Winchelsea..

Are you going to leave the hull un-painted?  

I think it will finish well with WOP..

That new molding looks exceptional!

13 hours ago, wefalck said:

If you download this article I wrote in 1980, on the second page there is a sketch (no. 13 and 14) for how to make fake splices and how to tie in blocks: https://www.maritima-et-mechanika.org/maritime/tips/FALCK-SM-5-80.pdf

 

This was written at a time, when there was no Internet to ask questions, but one had some books on full-size practice and then deducted some useful practice for modelling.

 

 

Really nice technique..

I grabbed a snip for my reference and will post here..

Let me know if you would rather I not share, and i will delete the picture..

I'll Post an example in a little while..

11 minutes ago, Laggard said:

Which would you use to seize a block to a mast?
 

Manila hemp

 

.012 black 

 

.021 black

What is the size of the block?

1 hour ago, glbarlow said:

others just offer an opinion forgetting it is just their opinion and not gospel

Not to mention, " a picture is worth a thousand words "..

When people suggest something should be done a certain way, it doesn't mean much if they can't provide an adequate illustration of how it is accomplished, or at least a nice picture of the end product.

Several such pictures are posted in page one of this topic.

Those pictures can be saved and printed for future reference..

Search for " strop " or "stropping " in the forum, and you will get more information than you can deal with in a lifetime..

Quote

Well thats easier said then done.

Isn't it always?😁

I am experimenting with making small moldings with a tabletop CNC, but still learning the software.

I'll share when I have something..

Another option is to make your initial grooves with a (small ) table saw then round off the profile with files, sandpaper etc.

You would not be starting with the final molding dimensions..   It would be strip or sheet wood, that you would cut from the stock once the rough shaping is done.

I will try to put together a visual if you could share the profile and dimensions of your molding..

8 hours ago, Mldixon said:

I am going to have to learn how to make scraped moldings better,

You have CNC skills..

Have you considered doing moldings with CNG?

3 hours ago, Jasseji said:

I hate Cast Carriages

They really look pretty good.

We know the difference, but how close is your target audience going to be, and will they know the difference?

I struggle over details that I know are important to me, but at some point I have to let it go..

I discovered BS when I ordered some ModelExpo branded CA to fill out an order to get free shipping.

Discovered it was re-branded BS..    I use the medium and it is the best I have found.

This will be great practice for your Sphinx..

The rigging  is exceptional, along with the rest of the build..

Oops..

My bad..

I have the plans, but haven't built..

They call for 5 carronades per side ...

You would have to ask Chuck why not 6..  I'm sure he was following some reference he has..

 (I see chuck has spoken while i was composing )

Check the plans!

They call for two long guns in the forward ports, but there is some debate about this..

I'll get you the discussion from the prototype build..

Discussion starts here:

Many of us started with plastic but became infatuated with wood model ships..

Enjoy the ride and learn as you go..  Don't get bogged down by the rivet counters..

I'm reminded of the cliché  about asking someone for the time, and getting a lecture about how to make a watch..

The point is, don't scare off an aspiring modeler with minutia..

Laggard  was looking for information to attach blocks to a mast in a model kit.

I think we provided some good information.

Pointing out that something is historically inaccurate without offering a good alternative doesn't really help the aspiring modeler very much, and may very well discourage them because they are intimidated by " not getting it right " according to the experts..

Are there any reliable references for longboat rigging in 1742?

8 hours ago, wefalck said:

In the 18th century wrought-iron bands with eye-bolts were not very common and I would not expect such fitting on a relatively thin mast as that of the long-boat.

The builder of this contemporary 1742 model didn't get the memo..😁

Here is another nice image from the log of BobF

You will be hard pressed to find any kit with detailed instructions for stropping blocks.

If you search forum topics for the word " stropping " or " strop " you will find a lot of different approaches, that you will have to sort out for yourself, and find a method that suits you.

Here is another example:

Here are some of GlBarlow's simulated iron bands ( made with tape )

Here is some of his stropping work with hooks..