-
Posts
1,603 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by Knocklouder
-
And this is what it looked like today shees, I punched a hole with the back end of my 10 blade as I was applying pressure to the planks bang right though. Well at least I can fix it . This is such a fun build, I am having way to much fun.lol Anyway it going good despite the set back.Talk soon Bob M.
-
Another New Guy Introduction
Knocklouder replied to Petes Shipyard's topic in New member Introductions
-
. The decks turned out great, the reason I had to redo them was because I used this marker for the planks it bleed though the sealer ugly mess. So I moved on to the hull planking. The new plank bender works really well. It so nice to bend the planks to the right shape before glueing them. The planks should just stick on but as soon as you glue it you feel like a surgeon asking for more clamps, more clamps, Lol 😆 Planking POB,is not all that bad I was worried about it. But it is preceding nicely, soon I will be below the paint line so mistakes can be covered lol. You wonder why you paint this nice wood when finished but I understand it is because of some worm that ate the wood, Number one reason for painting Protection!!! Well this is were I am at now so post when I get to the keel lol . Thanks for the likes and help !!!!! Bob M.
-
Well yesterday I stain the deck today I scraped it off. Lol But I think it turn out ok Also I threw a bunch of Gorilla glue on the stren but it cleaned up well too ,, lol
-
This is where I am right now just getting ready to start plaking the lower hull. After I watch Chucks video on plaking again. I see the Speedwell is coming along, He must be so excited about it, I was when I started the Mayflower, this will be my first plank on bulk heads Pob. Lol Well get to try my new Amati plank Bender , the bow on the Mayflower is quite rounded this will be fun .I let you know how it goes . Ok later my friend's .
-
Ahoy,this is a fun build so far lol. It going together nicely. I Did the decks then blacking some deck planks with a black marker . Next came the sides ,lots of glue and clamps but she on lol.
-
-
Good evening, I took all the bulkheads and keel,tried to fit them together only bulk head 14 fit. I ran a drill bit up and down all the bulk heads and keel, they fit now lol. So I glued them all together, squared them up added deck support and called it a day, So far so good , Game on.Later my friend's
-
- 179 replies
-
- Second Build
- Pinta
-
(and 2 more)
Tagged with:
-
Well today is box opening day, I have peeked a few times thought. Lol. I chose this Amati Mayflower model because of wood work and overall look. Many of the Mayflowers I looked at are Mayflower ll, they seem to have a lot of colours on them, for me its a bit too flashy for my likes. I dont see any other Amati Mayflowers logs so this will be my attempt to build one. It is so good to know if I run into any problems MSW will have the answers, slowly and I mean slowly getting to know my computer and how it work here on MSW.. Thanks ever so much !!!!!! Well got to go set things up for the build wish me luck lol ,one thing I noticed was that there was two bags full of dead eyes LOL the fun never stops . This hobby is so much fun ,does everyone get excited on box opening day then build days then finishing day, then NEW kit day lol 😆 Again thanks MSW for steering me in the right direction so glad to be a small part, see you buddy's got ships to build
-
So I will see you next year for the completion of the Pinta. Look what's on the bench lol time to start a new log. Stay safe my friends
- 179 replies
-
- Second Build
- Pinta
-
(and 2 more)
Tagged with:
-
Ahoy, continuing with the rigging seizing. It started off pretty rocky but found a log of the Sphinx that showed a different way to do it. It seemed easier for me so I did it that way ,I think it turned out ok for my first attempt. I measured a couple of times, the glued them . After I made all twelve shrouds and attached them, I went on to make the sails.
- 179 replies
-
- Second Build
- Pinta
-
(and 2 more)
Tagged with:
-
TRADUCTION MESSAGES
Knocklouder replied to LEFEBVRE's topic in How to use the MSW forum - **NO MODELING CONTENT**
Bonjour, I don't know but someone will tell you soon. But this is the Place to be. -
-
Well today I went to the old barn and found some mohogany from an old room divider we had. There is about 4 pieces that are 1x6 and 10 feet long, 4 eight footers and some others. I reached in, grabbed one and cut it to the length I wanted. Then sanded them roughly and put two away for the Nina and Mayflower. Then I picked one and finished it, it's a bit light in color but It Will Do . Then mounted it to the Pinta and hung it up to dry. Now that's done back to rigging lol . Having so much fun, learning lots Frist time I ever used a router....not bad lol. Well that's it, talk soon I am sure Lol
- 179 replies
-
- Second Build
- Pinta
-
(and 2 more)
Tagged with:
-
Ahoy, I made two dead eyes and attached them ,seizing needs works but coming along. I have 5 left to do on the practice side . Made a guide to follow so they are all the same size works, ok for me. I have broke out the blue rigging box, will post when finished the standing rigging Till then ,Thanks for all the likes and advise. As a newbie it helps to know I can find anything about model ships right here. So glad you guys let me stay lol!!
- 179 replies
-
- Second Build
- Pinta
-
(and 2 more)
Tagged with:
-
Very nice work,!!
-
You can't see were I messed up the deck,woo hoo. Now its time for all the standing rigging, then the sails which will be done after Christmas because I order some Gac 400 ,to save on shipping my buddy is bringing me some at Christmas. So if I finish what shall I do lol 😆
- 179 replies
-
- Second Build
- Pinta
-
(and 2 more)
Tagged with:
-
I had trouble with the Trozze, in English it's cheese ball 😳, I had a peice left from the SM, so I made two more then dump all the kit on the floor shees. Found most of it lol. I got my first dead eye done 13 left to do
- 179 replies
-
- Second Build
- Pinta
-
(and 2 more)
Tagged with:
-
Hello, I made the rudder, but the kit never came with small nails,so I got the closest thing to it when finished I found nails from the Santa Maria that were left over ,plus three rings for the canons.
- 179 replies
-
- Second Build
- Pinta
-
(and 2 more)
Tagged with:
-
- 179 replies
-
- Second Build
- Pinta
-
(and 2 more)
Tagged with:
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.