Jump to content
NRG Photographic Model Ship Competition - All eligible to enter - Reduced memberhsip fee - JULY 31 ENTRY DEADLINE ×

druxey

NRG Member
 View Profile  See their activity

  • Posts

    13,093

  • Joined

  • Last visited

 Content Type 

Everything posted by druxey

  1. druxey
    In the case of parallelogram-shaped ports, the lid hinges were arranged to pivot in a horizontal plane. One hinge's axis would be located slightly higher above the upper edge of the port. Thus the lid could open and shut without binding.
  2. druxey
    Usually the sides of the ports were vertical, as you have in 'C'. However, depending on the ship, if there were drag (floating lower at the stern than bow) the ports would appear as if 'leaning' backwards. The frames were normally set upright on the keel, the sides of the frames forming the sides of the ports.
  3. druxey
    Hopefully your vision will stabilize in a good way, Alan. Those aft cants look nice so far to my eye!
  4. druxey
    I'd forgotten to mention the David White series, which was excellent. Well worth hunting down indeed.
  5. druxey
    Pat: In your search (the site's search engine is not the best!), try things like 'diagonal planking model','diagonal planking plan' or even just 'diagonal'.
  6. druxey
    Undoubtedly the Science Museum ship models are all in storage vaults somewhere in England.... I do not believe that they have been 'de-acquisitioned', or this would be public knowledge.
  7. druxey
    I, too, use the small rechargeable butane torch seen in the photo on the right. I have also used an oxy/propane torch with interchangeable tips in a jeweler's studio. For larger pieces this will provide more even heating more rapidly.
  8. druxey
    It would be great if I could persuade folk to bend planks (by steam or dry heat) so that they would be shaped to 'sit' nicely along the hull without need for 'persuasion' by screws, clamps or other devices of torture!
  9. druxey
    Something like this from the RMG 'Collections' site? Object ID SLR2302 Description Scale: Unknown. A midship model showing a proposed method of hull construction with double-rigged iron frames and wooden planking. The model is made largely in wood with a planked hull and wooden frames to the upperworks. Two decks are depicted in frame, the main deck having a large hatch with a wooden edge. The deck beams are composite with wooden beams sandwiched between metal beams and with metal diagonal bracing. The deck below is identical in terms of composition and layout, but without the diagonal bracing. Two slender metal supports run vertically at either end of the section, fore and aft of the hatches, and terminating at the keelson. A paper label has been applied to the edge of the main deck hatch frame marked "15". Date made circa 1864 Read more at http://collections.rmg.co.uk/collections/objects/68261.html#SwHmmpfrbz0IJQCp.99
  10. druxey
    ...aaand - down the rabbit hole you go!
  11. druxey
    Not wanting to put you off, Gemma, but there's an awful lot to learn about naval architecture! One article that is helpful in basics was published many years ago in Model Shipwright. No's 22, 23. I'm PM'ing you information.
  12. druxey
    Looks like an upper and lower piece to the fore deadwood to my eye, Joss.
  13. druxey
    Yes, that Longridge book is a nostalgic one for all the pre-war sources of materials that existed then. Unlike his Anatomy of Nelson's Ships, there is little on hull structure. A framed model of Cutty Sark would be a nice challenge for Gerald Wingrove! How about it, Gerald?
  14. druxey
    Very neatly done, Toni. I like the clerestory lights.
  15. druxey
    Nice to see your progress, Michael. Enjoy using your new micro-torch with that beautifully engineered third hand. Is the torch oxy-propane?
  16. druxey
    Nicely cornered coamings!
  17. druxey
    Isn't the aft piece the fore deadwood rather than a third section of apron?
  18. druxey
    An example: the planking above the sheer rail is of danta in this model.
  19. druxey
    Marines were usually quartered aft. Petty officers were allowed a bit more elbow room.
  20. druxey
    Danta (from West Africa, I believe) is a very pleasant wood to use. It does have some grain structure visible, so would work best at larger scales.
  21. druxey
    From the last diagram, it would appear that the vertical planks were applied after at least the first diagonal layer.
  22. druxey
    Longridge also had a two-volume book published on building the model.
  23. druxey
    Welcome aboard, Kiran. We look forward to seeing what you've been modelling.
  24. druxey
    Very interesting building techniques, Andrzej! Nicely done.
  25. druxey
    Unlike the unfortunate Captain, I hope you return! She looks to be taking shape quite nicely now, Steven. You seem to have cornered the market for push pins.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...