Jump to content
MSW Spring Donation Drive

Old Collingwood

Members
 View Profile  See their activity

  • Posts

    11,515

  • Joined

  • Last visited

 Content Type 

Everything posted by Old Collingwood

  1. Old Collingwood
    Plan is - when dry hold them from the other end (protected with some tape) then spray the un-painted ends. OC.
  2. Old Collingwood
    Splendid work mate - I would be more than pleased with that. OC.
  3. Old Collingwood
    They did start to complain but I said "shush or I'll spray you"😀 OC.
  4. Old Collingwood
    Part of the modeling world I think we have all gone down - "Sods Law" loves to play us a visit" OC.
  5. Old Collingwood
    "Fight the good fight" get a load of kits out put them on the table and say - "Priorities - must get on with them now" OC.
  6. Old Collingwood
    Good day all, next stage in the Mossie saga - 500Lb painting, first I had to mockk up some kind of frame work to allow me to hold and spray - best I could come up with Peggy and Springy, I will paint this way then when dry spray the other end. OC.
  7. Old Collingwood
    Really impressive. OC.
  8. Old Collingwood
    Well worth waiting for the pics to come through - loverly work Mike and as others have said - so impressive at 1/72. OC.
  9. Old Collingwood
    Looking good mate - not far to go now. OC.
  10. Old Collingwood
    Pics arn't showing Mike. OC.
  11. Old Collingwood
    If you find you glued the wings on back to front - just turn the plane around. OC.
  12. Old Collingwood
    Looking great mate. OC.
  13. Old Collingwood
    Thank you Kevin. OC.
  14. Old Collingwood
    Really nice standard riging, and I agree with hamilton about the snaking. OC.
  15. Old Collingwood
    So, tomorrow I must paint me Bums.😆 OC.
  16. Old Collingwood
    Landed on the back of a low loader and drove under a lowe bridge.😁😁 OC.
  17. Old Collingwood
    And wear mittens - "Must wear mittens"😁 OC.
  18. Old Collingwood
    Yep, one of the ERK's threw a rather heavy hammer at the tail. OC.
  19. Old Collingwood
    Here's the trick build from the manual with lights off. OC.
  20. Old Collingwood
    Lou "Is that you mate"?😛 OC.
  21. Old Collingwood
    Hi all, After having our first walk out today walking the dog, I decided this eve to attack the aerial and comms wire, the idea was to drill a tinny narrow pilot hole in the front edge of the tail, (not the easiest operation) - so right, I tried it but combination of not being able to see what I was doing and tiny hand drill bit drifting - result a few scratches where the bit had drifted, eventually a pilot hole was made, next job was to push the end of a piece of fuse wire into the hold and add a bit od ca to hold it, then I glued the PE aerial put a pool of CE around the base and heated it with hairdryer. Then I tried to pull tight and glue (again with CE) the wire to the aeriel - but this was a fiddly not very sucessful operation so I gave up cut the wire away and just left the aerial in place to set. So I have given up on the idea of a comms wire and have marked the tail a bit (never mind) OC.
  22. Old Collingwood
    Thank you Edward. OC.
  23. Old Collingwood
    Thanks Mark, OC.
  24. Old Collingwood
    Or holding a tape rule in front of me and still asking the admiral "how many inches in a foot"😦 OC.
  25. Old Collingwood
    Nah thats an easy one - mine is the looking for glasses that are on head, do that all the time. OC.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...