pete48 Posted February 1, 2016 Author #91 Posted February 1, 2016 Today, after applying varnish to the Buzzards Bay 14, I concentrated on getting the rear deck beams installed and apply teak to the rear cockpit bulkhead. I started by laying out the access hole in the Bulkhead and then applied teak strips. While that was drying, I laid out the supports for the rear deck beams and installed them. I then installed the beams. I then trimmed the teak off the bulkhead and sanded it to 320 grit sandpaper. the bulkheads and center board box are dry fit. Here are the results popeye the sailor, Omega1234, michael mott and 5 others 8 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
Omega1234 Posted February 2, 2016 #92 Posted February 2, 2016 Coming along beautifully, Pete! Cheers Patrick pete48 and mtaylor 2 Quote MY SCRATCH BUILT MODELS ARE: Splendid Mega Yacht https://modelshipworld.com/topic/28576-splendid-by-omega1234-scale-1500-mega-yacht/ Majestic Mega Yacht https://modelshipworld.com/topic/28483-mega-yacht-majestic-by-omega1234-miniature/ Sapphire Mega yacht https://modelshipworld.com/topic/21088-sapphire-by-omega1234-1388-scale-mega-yacht-66m-8-inch-hull-length/?tab=comments#comment-639898 Genesis - Supersports Mega Yacht https://modelshipworld.com/topic/18168-genesis-by-omega1234-1300-49m-mega-yacht-8-inches-long-finished/?tab=comments#comment-559026http://modelshipworld.com/index.php/topic/14141-shadow-by-omega1234-scale-1300-luxury-60m-mega-yacht-8-inches-long/ SHADOW Luxury Motor Yacht http://modelshipworld.com/index.php/topic/11384-majellan-by-omega1234-luxury-37-metre-motor-yacht-miniature-7-inches-approx/ Majellan Luxury Motor Yacht http://modelshipworld.com/index.php/topic/9261Rainbow-j-class-racing-yacht/?p=273543 Rainbow J Class Racing Yacht Mystic Classic Motor Cruiser Symphony Ingomar Schooner: Scratch build Dorade Schooner: <p> Lennox Restoration Warship http://modelshipworld.com/index.php/topic/9577-pandora-cutaway-dockyard-style-miniature/?hl=pandora
pete48 Posted February 2, 2016 Author #93 Posted February 2, 2016 Thank You, Patrick, I have been having a lot of fun building this one, I am enjoying working on a larger scale, I have been able to use more actual Boat Building techniques wich is nice Best Regards, Pete popeye the sailor, dgbot, mtaylor and 4 others 7 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
Jond Posted February 3, 2016 #94 Posted February 3, 2016 What a nice lines as to a boat. I always loved the 14.your work is so clean...fun to watch so thansk for sharing cheers pete48 and mtaylor 2 Quote current builds Elizabeth Howard; HMS Terror; Zebedee F Cliff 4 mast schooner refit Beam Trawler Harvard 1926; Lightships of Boothbay. WAL 605 Overfalls ;Blue Dolphin Maine_ Arctic Schooner ; H G Berry_ Brigs of Boothbay; first pinky in Boothbay diorama; Bluenose 1:24 ; ernestina-morrissey-by-jond-1:48; aphrodite 1853 1st ship in boothbay ; Bowdoin diorama; dancing feather 1853 pilot schooner RC ; Boothbay Harbor One design racing sloop 1:6 radio Charles Notman 4 masted Downeast schooner 1:48 radio
druxey Posted February 3, 2016 #95 Posted February 3, 2016 Sweet! She's looking good. mtaylor and pete48 2 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
Jim Lad Posted February 3, 2016 #96 Posted February 3, 2016 Beautiful job, mate! John pete48 and mtaylor 2 Quote
pete48 Posted February 3, 2016 Author #97 Posted February 3, 2016 Thank You, Jon, I think Joel White did an Amazing job designing this one, The Herreshoff Boats have the most beautiful lines and are an absolute pleasure to build. Thank You druxey, Thank You, John and everyone that has hit the like button Best Regards, Pete Engelmann, mtaylor and popeye the sailor 3 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
pete48 Posted February 3, 2016 Author #98 Posted February 3, 2016 (edited) Today, With a high temperature of 28, ( about 0 C) and an impending snow storm, I decided I would get all the floor timbers installed. I started with Installing the Forward bulkhead, I then installed the Centerboard box, Once the centerboard box was installed, I used a template that I made to lay out the Floor timber lengths, I then measured and cut and installed all the Floor beams. I then turned my attention to making and installing the 2 blocks at the front bulkhead, Everything to this point has been glued with Titebond 3. Next will be to install the rear cockpit bulkhead and seal up the bilge. Here are the results Edited February 3, 2016 by Pete48 popeye the sailor, mtaylor, Engelmann and 2 others 5 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
Elijah Posted February 4, 2016 #99 Posted February 4, 2016 Hello, I saw your post on the "At a Glance" section. Your boat looks interesting! mtaylor and pete48 2 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
pete48 Posted February 4, 2016 Author #100 Posted February 4, 2016 Thank you, Elijah, I appreciate it Best Regards, Pete Engelmann, IgorSky, Erik W and 5 others 8 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
pete48 Posted February 4, 2016 Author #101 Posted February 4, 2016 Today, I started by installing the rear bulkhead, Next I finished the floor framing in the rear section, up to the rear bulkhead. I then ( before I got to carried away ) Made and installed the Mast Step. Next I made and installed all the door jambs, Followed by a coat of Titebond 3 in the bilge area. This will seal it up. Next will be to paint the bilge ( grey like I used on the Buzzards Bay 14 ) Here are the results popeye the sailor, mtaylor, Omega1234 and 12 others 15 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
dgbot Posted February 5, 2016 #102 Posted February 5, 2016 Looking good Pete. David B Omega1234, pete48, Elijah and 1 other 4 Quote Work in progress USS Maine in cardstock.http://modelshipworld.com/index.php/topic/7446-uss-maine-by-dgbot-hmv-card/#entry220003 Completed Blockade runner Teazer http://modelshipworld.com/index.php/topic/6063-blockade-runner-teazer-by-dgbot-card-stock/#entry175967 Completed The Monitor Lehigh http://modelshipworld.com/index.php/topic/6920-the-monitor-lehigh-by-dgbot-card-model/#entry203680 Completed Kingston Class MCVD http://modelshipworld.com/index.php/forum/10-kit-build-logs-in-progress/
pete48 Posted February 5, 2016 Author #103 Posted February 5, 2016 Thank you, David B., She's starting to come together Best Regards, Pete flying_dutchman2, Omega1234, captainbob and 9 others 12 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
pete48 Posted February 5, 2016 Author #104 Posted February 5, 2016 Today, I actually got a very early start, and a very simple task, I painted the Grey bilge coat ( it proved not to be as simple as one thought ) Next will be to work on the Cockpit seating, ( I have not decided whether to enclose them or leave them open like on the plans ) Here are the results tadheus, Elijah, Omega1234 and 7 others 10 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
Jim Lad Posted February 5, 2016 #105 Posted February 5, 2016 You're right, Pete - she really is starting to come together. John mtaylor, Elijah, Omega1234 and 1 other 4 Quote
pete48 Posted February 6, 2016 Author #106 Posted February 6, 2016 Thank You, John, Here is where I am at with No. 2 I have installed the Keel and am about ready to start planking, This one is going together a lot smoother than the first, the fine tuning of the molds and building jig have made a big difference and she's right on the money. Here are the results yvesvidal, popeye the sailor, Engelmann and 8 others 11 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
pete48 Posted February 22, 2016 Author #107 Posted February 22, 2016 (edited) Today, I decided that it would be better to get the Deck on, rather than finishing up the Cockpit. This way the Keel can be installed. I started by fairing the deck beams to the correct camber. I then cut out and installed the Deck. I then faired in the Deck with the Hull to 180 grit sandpaper. The boat will now be rigid enough to turn her upside down and install the Keel and Deadwood. Here are the results Edited February 22, 2016 by Pete48 dgbot, yvesvidal, paulsutcliffe and 11 others 14 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
michael mott Posted February 22, 2016 #108 Posted February 22, 2016 She looks great Pete, Nice job on the floor beams as well. Michael Omega1234, mtaylor, pete48 and 2 others 5 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
Omega1234 Posted February 22, 2016 #109 Posted February 22, 2016 Hey Pete All I can say is "Wow!" Love your work. Cheers Patrick Elijah, pete48 and mtaylor 3 Quote MY SCRATCH BUILT MODELS ARE: Splendid Mega Yacht https://modelshipworld.com/topic/28576-splendid-by-omega1234-scale-1500-mega-yacht/ Majestic Mega Yacht https://modelshipworld.com/topic/28483-mega-yacht-majestic-by-omega1234-miniature/ Sapphire Mega yacht https://modelshipworld.com/topic/21088-sapphire-by-omega1234-1388-scale-mega-yacht-66m-8-inch-hull-length/?tab=comments#comment-639898 Genesis - Supersports Mega Yacht https://modelshipworld.com/topic/18168-genesis-by-omega1234-1300-49m-mega-yacht-8-inches-long-finished/?tab=comments#comment-559026http://modelshipworld.com/index.php/topic/14141-shadow-by-omega1234-scale-1300-luxury-60m-mega-yacht-8-inches-long/ SHADOW Luxury Motor Yacht http://modelshipworld.com/index.php/topic/11384-majellan-by-omega1234-luxury-37-metre-motor-yacht-miniature-7-inches-approx/ Majellan Luxury Motor Yacht http://modelshipworld.com/index.php/topic/9261Rainbow-j-class-racing-yacht/?p=273543 Rainbow J Class Racing Yacht Mystic Classic Motor Cruiser Symphony Ingomar Schooner: Scratch build Dorade Schooner: <p> Lennox Restoration Warship http://modelshipworld.com/index.php/topic/9577-pandora-cutaway-dockyard-style-miniature/?hl=pandora
captainbob Posted February 22, 2016 #110 Posted February 22, 2016 Ah yes, she's a fine looking boat. Bob Omega1234, Elijah and pete48 3 Quote Every build is a learning experience. Current build: SS_ Mariefred Completed builds: US Coast Guard Pequot Friendship-sloop, Schooner Lettie-G.-Howard, Spray, Grand-Banks-dory, a gaff rigged yawl, HOGA (YT-146), Int'l Dragon Class II, Two Edwardian Launches In the Gallery: Catboat, International-Dragon-Class, Spray
pete48 Posted February 22, 2016 Author #111 Posted February 22, 2016 (edited) Thank you, Michael, I will be painting the deck a sand color, the same as on the Buzzards bay 14, it should set her off nicely Thank you, Patrick, I appreciate it Thank you, Cap'n'Bob, She has a lot of the same characteristics as the Herreshoff 12 1/2 Best Regards, Pete Edited February 22, 2016 by Pete48 hexnut, Omega1234, Jack12477 and 5 others 8 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
pete48 Posted March 15, 2016 Author #112 Posted March 15, 2016 Well, I procrastinated long enough, I knew that installing the Keel would be difficult, and it lived up to the billing. I started by lining up the Keel on the overturned hull, and marking the Hull as per plan. I used West System G-flex epoxy with 406 filler.( That went smoothly ) The tricky Part was Installing the Deadwood. ( this took a few attempts and burned thru a bunch of wood ) Once the Deadwood was set, I epoxied them in and filled the seams. I will let her stand for a day or 2 and fair the Keel. Here are the results tadheus, Elijah, Omega1234 and 10 others 13 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
Elijah Posted March 16, 2016 #113 Posted March 16, 2016 Looks good Pete! Omega1234, pete48 and mtaylor 3 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
pete48 Posted March 17, 2016 Author #114 Posted March 17, 2016 Thank You, Elijah, Best Regards, Pete mtaylor, Elijah and Omega1234 3 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
pete48 Posted March 30, 2016 Author #115 Posted March 30, 2016 Finally got a break in the weather, I was able to get a coat of primer on the Hull, and then used West System epoxy with 410 microlight for Fairing. I then Faired the hull. Next will be to get another coat of primer on and get her ready for gloss white. Here are the results mtaylor, dgbot, michael mott and 5 others 8 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
pete48 Posted March 31, 2016 Author #116 Posted March 31, 2016 The Fairing is complete, I marked and masked off the Waterline and shot the first coat of Gloss White Here are the results Omega1234, michael mott, Elijah and 4 others 7 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
pete48 Posted April 1, 2016 Author #117 Posted April 1, 2016 Today, the second coat of gloss white applied to the hull. She'l need some more wet sanding and a final coat. Here are the results Engelmann, hexnut, Elijah and 7 others 10 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
jdbondy Posted April 1, 2016 #118 Posted April 1, 2016 Great build log! Since I just started following it, I have a question about an early entry. When you installed the floor timbers prior to beveling the frames to accept the keel (January 12th entry), how did you securely attach them to the ribs without the floor timbers becoming stuck to the molds? Were the molds masked with tape? It seems to me that there wouldn't be much available gluing surface between the edges of the ribs and the floor timbers. Omega1234, pete48, Elijah and 1 other 4 Quote JD Current build: Schooner Mary Day (scratch) Previous builds: Model Shipways Pride of Baltimore 2, Amati HMS Endeavour, Midwest Muscongus Bay Lobster Smack, Bluejacket America, Midwest Sharpie Schooner
pete48 Posted April 1, 2016 Author #119 Posted April 1, 2016 Hi jdbondy, The Molds were beveled prior to the ribs being bent over them, It was tricky, the floor timbers were glued to the Keel, and outer edge of the Ribs ( Titebond 3 ) with a paint brush very thin to hold it in place, I went very slow and made sure not to get any glue on the molds, it worked out very well, When I started planking the glue was also applied to the floor timbers Best Regards, Pete Omega1234, mtaylor and Elijah 3 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
Omega1234 Posted April 2, 2016 #120 Posted April 2, 2016 (edited) Hi Pete She's looking great....but, I shouldn'have expected anything else, of course! Cheers Patrick Edited April 2, 2016 by Omega1234 Elijah, mtaylor and pete48 3 Quote MY SCRATCH BUILT MODELS ARE: Splendid Mega Yacht https://modelshipworld.com/topic/28576-splendid-by-omega1234-scale-1500-mega-yacht/ Majestic Mega Yacht https://modelshipworld.com/topic/28483-mega-yacht-majestic-by-omega1234-miniature/ Sapphire Mega yacht https://modelshipworld.com/topic/21088-sapphire-by-omega1234-1388-scale-mega-yacht-66m-8-inch-hull-length/?tab=comments#comment-639898 Genesis - Supersports Mega Yacht https://modelshipworld.com/topic/18168-genesis-by-omega1234-1300-49m-mega-yacht-8-inches-long-finished/?tab=comments#comment-559026http://modelshipworld.com/index.php/topic/14141-shadow-by-omega1234-scale-1300-luxury-60m-mega-yacht-8-inches-long/ SHADOW Luxury Motor Yacht http://modelshipworld.com/index.php/topic/11384-majellan-by-omega1234-luxury-37-metre-motor-yacht-miniature-7-inches-approx/ Majellan Luxury Motor Yacht http://modelshipworld.com/index.php/topic/9261Rainbow-j-class-racing-yacht/?p=273543 Rainbow J Class Racing Yacht Mystic Classic Motor Cruiser Symphony Ingomar Schooner: Scratch build Dorade Schooner: <p> Lennox Restoration Warship http://modelshipworld.com/index.php/topic/9577-pandora-cutaway-dockyard-style-miniature/?hl=pandora
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.