Jump to content

Recommended Posts

Posted

chances are there are some lashings under there.......you may elect to drill some small holes.  nicely done ;) 

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted

Hi,

Thank you for your visits, comments and likes.

 

I decided to fix some blocks to the bowsprit mast.

I have to smulate rope wrapping. With a 4 mm block it's to difficult to bind a block to the mast as in the real ship...

 

I post some photos showing how I try something... :D

 

For the first block it' s done with success...

 

 

0.jpg

Best Regards…

Ferit KUTLU

 

Under construction: Frigate Berlin (Brandenburg Navy)

Hope: Frigate Wappen Von Hamburg (Brandenburg Navy)

Posted

I have wrapped 5 times

 

and I have removed the two frontmost thootpicks and pulled gently at two end (blue arrows)

 

and two rings (red rings); for the mast (at the left) - for the block (at the right)

14.jpg

15.jpg

16.jpg

Best Regards…

Ferit KUTLU

 

Under construction: Frigate Berlin (Brandenburg Navy)

Hope: Frigate Wappen Von Hamburg (Brandenburg Navy)

Posted

Looks really great Ferit - nice job!

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    Hs129B-2 1/48  SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32   IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48  Eduard Sikorsky JRS-1 1/72

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Posted

I've never seen this kit before. It's gorgeous. Beautiful lines. And you're doing a great job with the build.

Sail on...... Mike         "Dropped a part? Your shoe will always find it before your eyes do"

Current Builds:                                                          Completed Builds:

Lancia Armata 1803 - Panart                                   US Brig Niagara - Model ShipwaysSection Deck Between Gun Bays - Panart  ; Arrow American Gunboat - Amati    

 Riva Aquarama - Amati                                           T24 RC Tugboat  ;  Hispaniola - Megow - Restoration ; Trajta - by Mikiek - Marisstella ; Enterprise 1799 - Constructo                             

                                                                   
                                                               

Posted

Many thanks, Mike and Mike (mikiek),

and who have liked the posts...

 

Now I need to repeat all the way for many blocks that have to be tied with a rope of 0,5 mm.

For the blocks that have to be tied with a rope thicker than 0,5 mm. I must follow the conventional way.

 

 

Conv..png

Best Regards…

Ferit KUTLU

 

Under construction: Frigate Berlin (Brandenburg Navy)

Hope: Frigate Wappen Von Hamburg (Brandenburg Navy)

  • 3 weeks later...
Posted

Ferit,

 

Good work. Yes these home made bits when there are so many added to a project end up making a huge difference indeed. Well done.

By the way also really like the staining details on your deck and railings. Very realistic looking.

 

Regards,

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Posted

Wow those gratings are amazing.  Very nicely done!

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    Hs129B-2 1/48  SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32   IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48  Eduard Sikorsky JRS-1 1/72

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Posted (edited)

Thank you Michael, Mike and who liked...

A small update.

I do not know if I've done the right thing about the ropes of the anchors but there isn't any guide on the plans, in fact there isn't any rope in this area... It's my decision, right or wrong... :-/WP_20180303_08_14_36_Pro_LI.thumb.jpg.492b4b1622b6c8a547e568497042d299.jpg

Grating is now on its own place...

And there are somewhere some few blocks fixed on the masts...

WP_20180303_10_59_08_Pro_LI.jpg

WP_20180303_08_13_59_Pro_LI.jpg

WP_20180303_10_59_34_Pro_LI (2).jpg

Edited by Ferit KUTLU

Best Regards…

Ferit KUTLU

 

Under construction: Frigate Berlin (Brandenburg Navy)

Hope: Frigate Wappen Von Hamburg (Brandenburg Navy)

  • 2 weeks later...
Posted

Glad to see you back Ferit.  Nice clean work as to be expected, the replacement grating looks much better.  Nicely done!

Cheers,
 
Jason


"Which it will be ready when it is ready!"
 
In the shipyard:

HMS Jason (c.1794: Artois Class 38 gun frigate)

Queen Anne Royal Barge (c.1700)

Finished:

HMS Snake (c.1797: Cruizer Class, ship rigged sloop)

  • 1 month later...
Posted

Very nice work,   what is the purpose of the small cut out in the corner of the grating.?

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Posted

Thank you OC...

 

Two ropes lifting the fore yard are ended with a violin block above this cut off. This violin block is fixed to the knight placed under the forecastle deck by a rope passing through that small cut out.

Best Regards…

Ferit KUTLU

 

Under construction: Frigate Berlin (Brandenburg Navy)

Hope: Frigate Wappen Von Hamburg (Brandenburg Navy)

Posted
22 minutes ago, Ferit KUTLU said:

Thank you OC...

 

Two ropes lifting the fore yard are ended with a violin block above this cut off. This violin block is fixed to the knight placed under the forecastle deck by a rope passing through that small cut out.

I see,    thank you for explaining that,  I have seen the sam cut out in a few gratings on different ships.

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

  • 3 weeks later...
  • 2 months later...
Posted

During two months I have redone some works.

I have changed the 3 mouses of the main, fore and mizzen masts which I had done many years ago. I have done the mouses of the main topsail and fore topsail masts in the same way to provide the uniformity between mouses. I have added  a pulley system to the crowfeet of the main and the fore masts. Some shrouds have been done. For now I doesn't fixe any rope for possible future adjustment.

 

Best Regards…

Ferit KUTLU

 

Under construction: Frigate Berlin (Brandenburg Navy)

Hope: Frigate Wappen Von Hamburg (Brandenburg Navy)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...