Izzy Madd Posted May 28, 2015 Share #2161 Posted May 28, 2015 Thanks Izzy, please put some photos, and explane wider ( my english ...) In mean time I`ll show some photos I picked One is from Rfolsom`s log, b/w is Lou`s and third is from net cat 5.jpg cats 2.jpg cats 3.jpg No problem as I thought words would be a barrier. Hope all are ok and yourself. GLakie and Piet 2 Quote Ongoing builds, SCutty Sark Revell 1/350 (Mini Nannie) Cutty Sark Airfix 1/130 (Big Sis) Will (Everard) Billings 1/65 but with wooden bottom, because I can Link to comment Share on other sites More sharing options...
Izzy Madd Posted May 28, 2015 Share #2162 Posted May 28, 2015 (edited) Hope this helps No scale just how to This can now be seen also in the forum "Kit Bashers Guide to The Galaxy" with more explanation if needed. Edited June 1, 2015 by Izzy Madd Krelis, Piet, IgorSky and 8 others 11 Quote Ongoing builds, SCutty Sark Revell 1/350 (Mini Nannie) Cutty Sark Airfix 1/130 (Big Sis) Will (Everard) Billings 1/65 but with wooden bottom, because I can Link to comment Share on other sites More sharing options...
Izzy Madd Posted May 28, 2015 Share #2163 Posted May 28, 2015 Sorry there are so many photos. I'm trying to show you all the stages and keep it simple hence no words. Hope the images say it all. Piet, dgbot, CaptainSteve and 3 others 6 Quote Ongoing builds, SCutty Sark Revell 1/350 (Mini Nannie) Cutty Sark Airfix 1/130 (Big Sis) Will (Everard) Billings 1/65 but with wooden bottom, because I can Link to comment Share on other sites More sharing options...
NenadM Posted May 28, 2015 Author Share #2164 Posted May 28, 2015 Goooood idea!!! Thx, now I get it Izzy Madd, Piet, GLakie and 3 others 6 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
Izzy Madd Posted May 28, 2015 Share #2165 Posted May 28, 2015 Goooood idea!!! Thx, now I get it So a picture does speak a thousand words. I did it as simple as me so you would stand a good chance of getting it. I hope you find it useful even if you don't use it CaptainSteve, Piet, GLakie and 2 others 5 Quote Ongoing builds, SCutty Sark Revell 1/350 (Mini Nannie) Cutty Sark Airfix 1/130 (Big Sis) Will (Everard) Billings 1/65 but with wooden bottom, because I can Link to comment Share on other sites More sharing options...
NenadM Posted May 29, 2015 Author Share #2166 Posted May 29, 2015 (edited) As I said Izzy, good idea, but in my scale, it is invisible Cats are 3cm long, with crossection 4x4 mm which means that sheaves openings are 3mm long and 0,5 mm wide. As it can be seen on picture, I drilled a hole, put inside 3mm barbeque toothpic 3mm dia, and ... where is it ? So little to be seen. Maybe some fine tuning and cleaning will help, we'll see This is tonight result Edited May 29, 2015 by Nenad CaptainSteve, GLakie, 3qq and 10 others 13 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
Izzy Madd Posted May 29, 2015 Share #2167 Posted May 29, 2015 (edited) As I said Izzy, good idea, but in my scale, it is invisible Cats are 3cm long, with crossection 4x4 mm which means that sheaves openings are 3mm long and 0,5 mm wide. As it can be seen on picture, I drilled a hole, put inside 3mm barbeque toothpic 3mm dia, and ... where is it ? So little to be seen. Maybe some fine tuning and cleaning will help, we'll see This is tonight result IMAG0134.jpg IMAG0135.jpg Hi, Glad my suggestion has been so well used. I find that the twisted wire and bristle brushes sold for cleaning out air brush guns great for removing that pesky bits that cling in holes like this. They are looking great. A coat of paint and you'd never know they were to scale. Well done. The hardest part is not tearing the wood apart when drilling. But you've taken to the next level as mine demo was not to scale. I hope the admarity as a whole are ok. Best wishes. If your not sure what tools I'm meaning just say. Edited May 29, 2015 by Izzy Madd Piet and GLakie 2 Quote Ongoing builds, SCutty Sark Revell 1/350 (Mini Nannie) Cutty Sark Airfix 1/130 (Big Sis) Will (Everard) Billings 1/65 but with wooden bottom, because I can Link to comment Share on other sites More sharing options...
Izzy Madd Posted May 30, 2015 Share #2168 Posted May 30, 2015 Hi, It's not always about what can be seen as much as knowing it's been done right. As far as I can see the biggest issue is general dust and glue in there. Try running some thick thread back and forth like dental floss. Or even several lengths of normal thread twisted together like a pipe cleaner. Or if you have any the small brushes used for air brushes as they are very small. Like these They range from 5-1.5mm and are great for cleaning more than airbrushes. They also do ones that are just the wire part and so more harsh but needed sometimes GLakie and Piet 2 Quote Ongoing builds, SCutty Sark Revell 1/350 (Mini Nannie) Cutty Sark Airfix 1/130 (Big Sis) Will (Everard) Billings 1/65 but with wooden bottom, because I can Link to comment Share on other sites More sharing options...
Izzy Madd Posted May 30, 2015 Share #2169 Posted May 30, 2015 Or even these. We call them hummingbird detail pick Great for teath and models. And yes Cap'n you can use either idea‽ Piet, GLakie and dgbot 3 Quote Ongoing builds, SCutty Sark Revell 1/350 (Mini Nannie) Cutty Sark Airfix 1/130 (Big Sis) Will (Everard) Billings 1/65 but with wooden bottom, because I can Link to comment Share on other sites More sharing options...
rfolsom Posted June 1, 2015 Share #2170 Posted June 1, 2015 Hmmm.... Yes! Izzy's solution was a great solution to the cathead sheaves... I wish I would have thought of that at the time... (So simple, but very effective). Hope you are doing well, and all the best for the family... ~Bob NenadM, Piet and GLakie 3 Quote Link to comment Share on other sites More sharing options...
Mirabell61 Posted June 1, 2015 Share #2171 Posted June 1, 2015 Nenad, your cathead Posts with 3 sheaves (laminated) look fantastic.... Well done ! Nils GLakie, Izzy Madd, popeye the sailor and 1 other 4 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
NenadM Posted June 1, 2015 Author Share #2172 Posted June 1, 2015 Hmmm.... Yes! Izzy's solution was a great solution to the cathead sheaves... I wish I would have thought of that at the time... (So simple, but very effective). Hope you are doing well, and all the best for the family... ~Bob As I remember, you did,something similar Bob? Btw, can you declare a time of your buildimg come back ? We miss you Piet and GLakie 2 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted June 1, 2015 Author Share #2173 Posted June 1, 2015 Nenad, your cathead Posts with 3 sheaves (laminated) look fantastic.... Well done ! Nils Thank you for your kind words Nils. I wish I have even 10% of your skils. Mirabell61, GLakie and Piet 3 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted June 1, 2015 Author Share #2174 Posted June 1, 2015 (edited) Izzy I made mistake. My unpatience (again). I had to clean dust from sheaves right after drilling hole, but ... Nenad is ... just Nenad ... didn't do it, and, being idiot, put CA on toothpick and turn it in hole, without thinking (again) that CA will interact with sanddust and little wooden pieces left in sheaves, and cemented them. Now, I have 0,5mm wide sheaves openings full of CA with dust and pieces, very very hardened... Here is macro shot of one of the openings This is the worst, almost full filled with hardened CA. And just try to imagine this 0,5mmx3mm space cleaning with anything without damage? Considering that baffles between openings are also 0,5 mm wide, I thing that cleaning without serious damage is mission imposible. It seems to be much easier to make them again, with usage of brain, this time Edited June 1, 2015 by Nenad GLakie, mtaylor, popeye the sailor and 5 others 8 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
SawdustDave Posted June 1, 2015 Share #2175 Posted June 1, 2015 (edited) Just knowing someone else, besides me, can do stuff like this is a comfort.... Hahaha Build it enough times, you will eventually get it right my friend..... Trust me. Edited June 1, 2015 by SawdustDave mtaylor, Piet, dgbot and 2 others 5 Quote Sawdust Dave - Current build - USS Constitution 1:60th (scratch).... Visit my blog site - All previous builds.... http://davesmodelships.blogspot.com Link to comment Share on other sites More sharing options...
NenadM Posted June 2, 2015 Author Share #2176 Posted June 2, 2015 (edited) I agree, Dave Problem is my wish to finish my model in real time Maybe one more attempt Or two Looking for this on my office desk, silly idea comes for making sheaves instead to drill throught Edited June 2, 2015 by Nenad GLakie 1 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted June 3, 2015 Author Share #2177 Posted June 3, 2015 (edited) Final solution for sheaves - all-mighty folder mechanism metal strip Rounding corners and getting circle shape with dremell tool Body (layers) is made of fine sanded veneer, finished with 400 sandpaper. This is esential to get straight lines of every particular layer inside sheaves openings. Later it is impossible to correct. At the place. Veneer strips are 5mm wide, and sanding will put them to 3,5-4mm as it has to be according to my rescaled C-plans After rough sanding, sheaves appears, as I expect Macro shot Putty and paint left to be done, and Cats will be ready to mount. Now it will be easy to turn off excess of paint from metal, when wood soaks paint But at the end, there is still a question: Only 3,5x3,5 mm ... sheaves opening is 0,5x3mm, ... particular sheave is ... invisible ... was it really worth several attempts? Yes, having in mind playing, relaxing and fine tuning my skills. From other side, considering no rope goes through, I think - with no doubt, there is not possibity that anybodu will see sheaves openings, and sheaves inside without magnifier, just as my (ex Bob's) piggy under fore deck in piggpen Edited June 3, 2015 by Nenad GLakie, CaptainSteve, mtaylor and 2 others 5 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
Izzy Madd Posted June 3, 2015 Share #2178 Posted June 3, 2015 Final solution for sheaves - all-mighty folder mechanism metal strip IMAG0136.jpg Rounding corners and getting circle shape with dremell tool IMAG0137.jpg Body (layers) is made of fine sanded veneer, finished with 400 sandpaper. This is esential to get straight lines of every particular layer inside sheaves openings. Later it is impossible to correct. At the place. Veneer strips are 5mm wide, and sanding will put them to 3,5-4mm as it has to be according to my rescaled C-plans IMAG0138.jpg After rough sanding, sheaves appears, as I expect IMAG0139.jpg Macro shot IMG_20150603_210112.JPG Putty and paint left to be done, and Cats will be ready to mount. Now it will be easy to turn off excess of paint from metal, when wood soaks paint But at the end, there is still a question: Only 3,5x3,5 mm ... sheaves opening is 0,5x3mm, ... particular sheave is ... invisible ... was it really worth several attempts? Yes, having in mind playing, relaxing and fine tuning my skills. From other side, considering no rope goes through, I think - with no doubt, there is not possibity that anybodu will see sheaves openings, and sheaves inside without magnifier, just as my (ex Bob's) piggy under fore deck in piggpen A possible help aluminium soda cans are much softer so would punch far easier. And if need be glue together to get greater thickness, as well as being easier to shape. Also once each sheave is as you want. Drill small hole in centre. Clean the dust off and insert a piece of paper clip to hold them in place. And then they even turn. Just a thought. Also you can remove the glue dust mix with acetone very easily. Although you probably know this. The type of glue I used was PVA which I should have said before. GLakie, Piet, dgbot and 1 other 4 Quote Ongoing builds, SCutty Sark Revell 1/350 (Mini Nannie) Cutty Sark Airfix 1/130 (Big Sis) Will (Everard) Billings 1/65 but with wooden bottom, because I can Link to comment Share on other sites More sharing options...
NenadM Posted June 4, 2015 Author Share #2179 Posted June 4, 2015 After putty, sanding and painting Next are metal fittings of Cathead, figure on top and mounting on fore deck Izzy Madd, ianmajor, Piet and 7 others 10 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
GLakie Posted June 4, 2015 Share #2180 Posted June 4, 2015 Those turned out great Nenad! Hope all is well there. Piet and Izzy Madd 2 Quote GEORGE Don't be bound by the limits of what you already know, be unlimited by what you are willing to learn. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
NenadM Posted June 4, 2015 Author Share #2181 Posted June 4, 2015 (edited) Those turned out great Nenad! Hope all is well there. Thanks George. Actuallly ... I dont know ... status quo couple of days, without moving forward ( bad news) and withlit moving backward (good news). Still very weak, unmovable, counting 23th day since surgery, still in intensive care Edited June 4, 2015 by Nenad Piet, mtaylor, CaptainSteve and 1 other 4 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
Izzy Madd Posted June 4, 2015 Share #2182 Posted June 4, 2015 Our hearts and thoughts are with you all at times like these... CaptainSteve, GLakie, Piet and 2 others 5 Quote Ongoing builds, SCutty Sark Revell 1/350 (Mini Nannie) Cutty Sark Airfix 1/130 (Big Sis) Will (Everard) Billings 1/65 but with wooden bottom, because I can Link to comment Share on other sites More sharing options...
popeye the sailor Posted June 4, 2015 Share #2183 Posted June 4, 2015 hoping recovery picks up speed for you two Nenad.......catheads look sweet! GLakie, NenadM and Piet 3 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch Link to comment Share on other sites More sharing options...
NenadM Posted June 6, 2015 Author Share #2184 Posted June 6, 2015 (edited) Thx Izzy and Denis Yesterday, byin' some stuff for Hothead's exam modeling, I discovered resource of brass wire 0,5mm to up, brass pipes 1mm to up, wooden mouldings square and rounded, different foils and materials, on a place I never suppose to find it there ( supply shop for screen printing). Right on time for playing with cathead's fitting. And playing with soldier iron too (if it survive last Hothead's attack) Nils, please do not look at this baby steps of metal works which follow Edited June 6, 2015 by Nenad mtaylor, Piet, dgbot and 4 others 7 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted June 6, 2015 Author Share #2185 Posted June 6, 2015 First brass soldering experience ... for now, it seems more easy than coper soldering, and wire is a bit stronger, just it has to be This two "hooks" (whatever is their name) are positioned 5 and 10 mm from top, and bothered me a lot, because each one is very small ( 1,5-2m). After several attempts I got I was looking for I can not find on plans or photos clear shot or drawing of place and way of conection to cathead, and, having in mind that all will be painted black, decided for this solution Next is angle . Two angles : vertical and toward stern. My regular two hours working time, and just a second to dissapear somewhere on table. Half of hour looking for, and found it ... yes , you guess, on the floor. Fortunately, no damage. Just today I cleaned floor (after loooong time) and see it right on time before Tiranosaurus Rex squashed it Litlle thinking forward ... this cathead attachment is fragile, sharp, and pretty much positioned outside from model, and it is real possibity to damage it before rigging time. I have to make it movable, and to keep it somewhere out of model untill rigging time comes. Same thing with fragile parts on foredeck ( nets, bars, etc) Main thing is not to forget something later GLakie, Piet, Izzy Madd and 8 others 11 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted June 6, 2015 Author Share #2186 Posted June 6, 2015 And what is this ? Why I can not edit post from phone ? Piet, GLakie and Izzy Madd 3 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
GLakie Posted June 6, 2015 Share #2187 Posted June 6, 2015 That's some good looking iron-work Nenad. Not sure what the Sucuri warning's about! Piet and Izzy Madd 2 Quote GEORGE Don't be bound by the limits of what you already know, be unlimited by what you are willing to learn. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
Sven Posted June 6, 2015 Share #2188 Posted June 6, 2015 Hi Nenad All you detailing is looking terrific! The sharp and fragile piece I think is called the whisker and is hinged on the real CS as you can just see at the top of the photo to keep it out of the way when necessary Hope this helps! mtaylor, Piet, Izzy Madd and 2 others 5 Quote Matt Current build Royal yacht Britannia - bottle - 1:500 scale http://modelshipworld.com/index.php?/topic/2299-royal-yacht-britannia-1893-bottle-scale-1500/ HMS Victory 1:600 scale http://modelshipworld.com/index.php?/topic/882-hms-victory-by-sven-1600-scale/ Link to comment Share on other sites More sharing options...
NenadM Posted June 6, 2015 Author Share #2189 Posted June 6, 2015 Thank you George and Matt. Whisker boom according to C-plans. Usefull picture Matt to understand function and working scene of cats. I think I'll keep my solution because my magnifier is only 3x englaring, and do not know how to drill 0,2mm hole in 1mm wire And somewhere in detailing you just have to say simply words : " stop, that is enough" GLakie, Piet, mtaylor and 2 others 5 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
Izzy Madd Posted June 6, 2015 Share #2190 Posted June 6, 2015 Thank you George and Matt. Whisker boom according to C-plans. Usefull picture Matt to understand function and working scene of cats. I think I'll keep my solution because my magnifier is only 3x englaring, and do not know how to drill 0,2mm hole in 1mm wire And somewhere in detailing you just have to say simply words : " stop, that is enough" It can be done by eye but it is not simple to explain. And can be a case of do it right or destroy everything so probably best. Thinking of you all take care of your self as well. NenadM, GLakie and Piet 3 Quote Ongoing builds, SCutty Sark Revell 1/350 (Mini Nannie) Cutty Sark Airfix 1/130 (Big Sis) Will (Everard) Billings 1/65 but with wooden bottom, because I can Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.