My Fathers Son Posted November 14, 2021 Share #4081 Posted November 14, 2021 Do you really need to start again? You have the base there, its just missing the cut out for the Topgallant Mast. mtaylor and Jack12477 2 Quote Link to comment Share on other sites More sharing options...
NenadM Posted November 14, 2021 Author Share #4082 Posted November 14, 2021 1 hour ago, My Fathers Son said: Do you really need to start again? You have the base there, its just missing the cut out for the Topgallant Mast. Not exactly 😟 Ironing base on down side od platform, without planing to open that hole, left no enough space for this You can see it on photo of detail GrandpaPhil and mtaylor 2 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
mtaylor Posted November 14, 2021 Share #4083 Posted November 14, 2021 3 hours ago, NenadM said: You are right, my friend. C-plans are not quite readable for begginers When you point, I check it, and see ... In mean time, I re-think, and decided to make it again, this time from a bit harder material, and more acurate and clean Is there any part of Her Majesty which I can make at once? But, this is all one big game. so, let`s play! I think you're right about not making parts just once. I have a box full of scrap wood.... make that read; reworked parts. NenadM 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
NenadM Posted November 14, 2021 Author Share #4084 Posted November 14, 2021 33 minutes ago, mtaylor said: I think you're right about not making parts just once. I have a box full of scrap wood.... make that read; reworked parts. Dark side, my friend. I fully understand why 😁. But ... better option than Dune with sandworms 🤫 My Fathers Son, Jack12477 and mtaylor 3 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted November 30, 2021 Author Share #4085 Posted November 30, 2021 I decided to remake masts, and now I am looking for tin sheet metal piece, thin enough to look as real, and solid enough to be able to handle forces of tighted ropes. At the same time, to be easy for drilling and carving. It is not easy task as it looks on first sight mtaylor 1 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted March 12, 2022 Author Share #4086 Posted March 12, 2022 Satisfied at last mtaylor, Jack12477, GrandpaPhil and 2 others 4 1 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
mtaylor Posted March 12, 2022 Share #4087 Posted March 12, 2022 Looks great and well worth the effort, Nenad. NenadM and Jack12477 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
NenadM Posted March 13, 2022 Author Share #4088 Posted March 13, 2022 17 hours ago, mtaylor said: Looks great and well worth the effort, Nenad. Thanks. It was a kind of problem, considering this is full scratch build, to find a sheet of metal, to be thin and enough strong at the same time. A lot of ropes go there, which mena a lot of thiny forces will affect ends of structure, and structure itself is pretty weakened with openings. mtaylor and Jack12477 2 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted March 14, 2022 Author Share #4089 Posted March 14, 2022 Micro soldering 5x6x5 mm in base, and first layer of color GrandpaPhil, mtaylor and Jack12477 3 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
rwiederrich Posted March 15, 2022 Share #4090 Posted March 15, 2022 And here we go Nenad.....tops are being made.......good job. Oh...I can't believe you're going on, or are on 9 years for this log....what an adventure. Keep going strong... Rob mtaylor 1 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
NenadM Posted March 15, 2022 Author Share #4091 Posted March 15, 2022 (edited) 2 hours ago, rwiederrich said: And here we go Nenad.....tops are being made.......good job. Oh...I can't believe you're going on, or are on 9 years for this log....what an adventure. Keep going strong... Rob Hello Rob, and thanks for nice words Yes, 9 years ... but there are some excuses ... my job, which varies betwen 0 and 16 working hours per day, my family, and my character - monkey see monkey do e.g. my another hobbies (photography, guitar, writing and publishing novels, painting with acrylic on canvas, researching history, gardening, traveling, reading books, study listen and collect music, theatre, opera, ballet, exibitions, long walks with my dog, etc etc), and of course my social life and some ladies To complete picture, I am not experienced modeler, so I still learn, which result usually with 2-4 attemts before I do something in a way I want it. And just to make the soup thicker, some time ago I was promoted to be one of Admins for famous Serbian photo group with 65.000 members ... in my vocabulary, word - boring does not exist ! But I am here, in shadows, watching what happens here on MSW Edited March 15, 2022 by NenadM wrong typing My Fathers Son, Jack12477, gjdale and 1 other 4 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted March 17, 2022 Author Share #4092 Posted March 17, 2022 Step by step And I think it's OK nows ccoyle, GrandpaPhil, mtaylor and 2 others 5 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
My Fathers Son Posted March 18, 2022 Share #4093 Posted March 18, 2022 14 hours ago, NenadM said: Step by step And I think it's OK nows I must applaud your tenacity NenadM, metal is a much harder (as in difficult) material to work with, and you have produced an excellent end result. Simon Jack12477 1 Quote Link to comment Share on other sites More sharing options...
NenadM Posted March 18, 2022 Author Share #4094 Posted March 18, 2022 9 hours ago, My Fathers Son said: I must applaud your tenacity NenadM, metal is a much harder (as in difficult) material to work with, and you have produced an excellent end result. Simon Thank you! Two more to go. After resolving two rings issue at the bottom of mast Jack12477 and mtaylor 2 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted March 31, 2022 Author Share #4095 Posted March 31, 2022 Walking on the edge of patience mtaylor, Jack12477, GrandpaPhil and 1 other 4 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
My Fathers Son Posted March 31, 2022 Share #4096 Posted March 31, 2022 Hi NenadM, Just a thought, but won't you need to insert the base of the mast into the deck? That is a nice neat ring, you will need to install the spider ring above this first though with the loops horizontal to accept the belaying pins. Simon mtaylor 1 Quote Link to comment Share on other sites More sharing options...
NenadM Posted March 31, 2022 Author Share #4097 Posted March 31, 2022 11 minutes ago, My Fathers Son said: Hi NenadM, Just a thought, but won't you need to insert the base of the mast into the deck? That is a nice neat ring, you will need to install the spider ring above this first though with the loops horizontal to accept the belaying pins. Simon Hi, Simon I am not sure for now, should I make mast again. So, untill I decide, I practice and try to find a way "how to ..." mtaylor and Jack12477 2 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
rwiederrich Posted March 31, 2022 Share #4098 Posted March 31, 2022 12 minutes ago, My Fathers Son said: Hi NenadM, Just a thought, but won't you need to insert the base of the mast into the deck? That is a nice neat ring, you will need to install the spider ring above this first though with the loops horizontal to accept the belaying pins. Simon Looks like he is just test fitting it and evaluating its symmetry. Great job Nenad. Rob Jack12477, mtaylor, My Fathers Son and 1 other 4 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
My Fathers Son Posted March 31, 2022 Share #4099 Posted March 31, 2022 (edited) I hope so Rob, it is a good start. I would not remake the mast based on this as this part will be below deck any way. I would temporarily set the mast in place and mark the height for the deck level, mast foot, this ring and the spider ring. The ring NenadM has made is a good template for the Spider ring so this can be drilled out for the pin mounts. The mast can then be reassembled and nobody will be any the wiser of the initial slip up. Simon Edited March 31, 2022 by My Fathers Son NenadM and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
NenadM Posted April 2, 2022 Author Share #4100 Posted April 2, 2022 Alternative dead eyes, max 4mm dia ... My madness don't allow me to by parts, so, great problem are dead eyes 3-4 dia. Making them from wood with three holes ... not to throw appart, not possible for me. And idea comes. Tested today succesfully. Three brass pipes 1mm inside dia, soldered in triangle. When it get cold, cut pieces thick 1mm, clean holes. You can paunt them in desired colour. Rest - rigging them is classical path. This is just a test, and ropes are not adequate, knots too keelhauled, GrandpaPhil, gjdale and 4 others 7 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
mtaylor Posted April 2, 2022 Share #4101 Posted April 2, 2022 Just brilliant on making those deadeyes, Nenad. Jack12477, keelhauled and NenadM 3 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
NenadM Posted April 2, 2022 Author Share #4102 Posted April 2, 2022 11 minutes ago, mtaylor said: Just brilliant on making those deadeyes, Nenad. Thanks Mark Jack12477 and My Fathers Son 2 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
keelhauled Posted April 21, 2022 Share #4103 Posted April 21, 2022 very impressive work going on there! You're very creative. Hope all is well with you and your family! best Marc mtaylor, NenadM and My Fathers Son 3 Quote Currently building the Cutty Sark http://modelshipworld.com/index.php?/topic/1000-cutty-sark-by-keelhauled-mantua-kit-bashed-first-wooden-ship-build/ Link to comment Share on other sites More sharing options...
NenadM Posted June 25, 2022 Author Share #4104 Posted June 25, 2022 Last test done Now, from beggining to lower masts berhard, Jack12477, mtaylor and 2 others 4 1 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted June 26, 2022 Author Share #4105 Posted June 26, 2022 Visual testing ScottRC, mbp521, clearway and 6 others 9 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
Sailor1234567890 Posted November 25, 2023 Share #4106 Posted November 25, 2023 Any updates? Quote Link to comment Share on other sites More sharing options...
NenadM Posted February 1 Author Share #4107 Posted February 1 Update, after .... he he ... long time ... Fjnaly found adequate material for masts, and remade bodies for all of them. Really fun starts right there! ccoyle, fake johnbull, GrandpaPhil and 4 others 7 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
mtaylor Posted February 1 Share #4108 Posted February 1 It's great to see you back, Nenad and making progress. Jack12477 and NenadM 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
NenadM Posted February 2 Author Share #4109 Posted February 2 (edited) 9 hours ago, mtaylor said: It's great to see you back, Nenad and making progress. Hello again. Life is too short for ... Ship model making, classical art of painting research, museums, theaters, concerts, drawing and painting, collecting and listening to music (over 100 GB), playing the guitar, mindlessly reading books, writing and publish short stories (240), history research, Admin FB photo page MBDI, photography, cooking, my home yard, long walking, Bobtail Rhea, furniture making, bicycle, houm reparations, different modeling in wood and Ytong, computers and mobile phones, chess, sudoku extreme, travel trips in Serbia, swimming ... Also visiting Princess in Germany where she live and work, be with Hothead who finally got his master degree in architecture Also some ladies from time to time ... And my office, of course. In April i can retire with 65 years old and full 40 years of working, but I`ll continue to work as attorney. As you can see ... usual staff for me - "monkey see - monkey do" 😜 In all that stuff, I was stuck in finding appropriate material for masts for a long time See you soon here, dear friend. Nenad Edited February 2 by NenadM my mistakes Jack12477 and mtaylor 2 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted February 10 Author Share #4110 Posted February 10 Little progress. First I closed and filled wrong holes I drill for masts, and then cover them properly Jack12477, clearway, mtaylor and 2 others 5 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.