Javlin Posted January 25, 2021 Author #61 Posted January 25, 2021 First of all the Nationality of the crate will be Brit the radio compartment and some of the IP are totally different I will have pics of the crate I intend to do at a later date it's colorful red/white striped tail .OC and EG I do not know if you fellas have any ideas on the cable/wire in these crates?I have four books now and it's all black/white I am thinking white and yellow just a guess.I have a bit more to do on the stand for the transmitter and some more wires coming out of the side of the transmitter behind the seat and PRU seats were cut in half.I added a switch panel down the lower L/side of the seat with two PE toggles and some punch stock which the PE came from the B-25 kit looks the part.I figures out the that piece on the side of the IP leg it goes flat no map shoot had to look at Kermit Weeks PRU video same riveting and all. Kevin AJohnson, oneslim, Landlubber Mike and 10 others 13 Quote
Old Collingwood Posted January 25, 2021 #62 Posted January 25, 2021 Nice seeing you back with this. OC. mtaylor, Canute, popeye the sailor and 4 others 7 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Javlin Posted January 25, 2021 Author #63 Posted January 25, 2021 I have been working on it OC but it has been like 1hr clips any idea on the wiring colors? Kevin Egilman, lmagna, mtaylor and 4 others 7 Quote
Old Collingwood Posted January 25, 2021 #64 Posted January 25, 2021 33 minutes ago, Javlin said: I have been working on it OC but it has been like 1hr clips any idea on the wiring colors? Kevin Just asked someone who should know - just waiting for a reply back as I am not too sure. OC. Edwardkenway, Javlin, Canute and 5 others 8 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Egilman Posted January 25, 2021 #65 Posted January 25, 2021 Wiring color? I think you mean conduit colors... There would not be any exposed wiring anywhere... Conduit colors are one of three, but generally they are the same as the bulkhead they are mounted to..... You would do better researching the type of conduits used in the specific application.... They used both solid and flexible, solid in it's native color would be a cadmium silver, flexible would be either steel, aluminium or brass... most generally they were aluminium..... For their look, solid was smooth like copper pipe, flexible would look like old BX building conduit...... Silver, Black or whatever interior color was on the bulkhead... Javlin, mtaylor, Edwardkenway and 4 others 7 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Old Collingwood Posted January 25, 2021 #66 Posted January 25, 2021 54 minutes ago, Egilman said: Wiring color? I think you mean conduit colors... There would not be any exposed wiring anywhere... Conduit colors are one of three, but generally they are the same as the bulkhead they are mounted to..... You would do better researching the type of conduits used in the specific application.... They used both solid and flexible, solid in it's native color would be a cadmium silver, flexible would be either steel, aluminium or brass... most generally they were aluminium..... For their look, solid was smooth like copper pipe, flexible would look like old BX building conduit...... Silver, Black or whatever interior color was on the bulkhead... Thanks brother, you said it better than I could, I was going to cheat and go and ask someone involved in bringing a mossie back to life as I wasn't sure of the answer. OC. popeye the sailor, Egilman, AJohnson and 5 others 8 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Javlin Posted January 25, 2021 Author #67 Posted January 25, 2021 (edited) 13 hours ago, Egilman said: Black or whatever interior color was on the bulkhead... I got that report from a fella in Canada working on the restoration of a crate up there.thks for the input guys! Kevin Also EG he mentioned the pale yellow which I see represented on the right side of the fuse so another color on my part in that area is coming.He also mentioned the transmitter stand was a possibility. Edited January 25, 2021 by Javlin popeye the sailor, Egilman, AJohnson and 4 others 7 Quote
Egilman Posted January 25, 2021 #68 Posted January 25, 2021 (edited) 36 minutes ago, Javlin said: I got that report from a fella in Canada working on the restoration of a crate up there.thks for the input guys! Kevin Also EG he mentioned the pale yellow which I see represented on the right side of the fuse so another color on my part in that area is coming.He also mentioned the transmitter stand was a possibility. My pleasure Kevin, glad to be of help.... Pale Yellow is a color variation of Zinc Chromate which was the metal preservative used on the interior of aircraft of the period... If it had field maintenance you could easily see some on the interior of aircraft and early in the war you could see entire aircraft interiors painted in it, but not often..... Generally they were zinc chromate green... It became ubiquitous in aircraft, of the period, (especially US aircraft) British aircraft were either Green or Yellow depending on availability.... Eventually, wooden aircraft were being painted in an alkyd oil paint called Interior Green..... There is a difference, Interior Green was a semi gloss, Zinc Chromate green was dead flat.... ZC Green was a shade or two lighter than Interior Green as well..... Portions of the interior being partially Yellow Zinc Chromate is period correct....... Edited January 25, 2021 by Egilman AJohnson, BLACK VIKING, Old Collingwood and 4 others 7 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Javlin Posted January 29, 2021 Author #69 Posted January 29, 2021 EG Yellow Zinc is the color I am going with the L/side cables.I got some paint laid and being that the pilot sat on his parachute I cut the seat up removed the unwanted cushions and made her bar.I still need to hit the the fire ext with a little more copper the right color and add cushions to the arm rest and green. kevin Landlubber Mike, Edwardkenway, Canute and 8 others 11 Quote
Egilman Posted January 29, 2021 #70 Posted January 29, 2021 Looking great Kevin, wish I do mine that well... mtaylor, Javlin, lmagna and 3 others 6 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Javlin Posted January 29, 2021 Author #71 Posted January 29, 2021 I had a question about the attachment of the harness for the radio ops guy got this in response from the guy in Canada working on one one could enhance that seat quite abit ,,,,,,,,,,,, Edwardkenway, Canute, popeye the sailor and 4 others 7 Quote
Egilman Posted January 29, 2021 #72 Posted January 29, 2021 3 minutes ago, Javlin said: one one could enhance that seat quite abit Looks like it came directly out of the maintenance manual, can't get much more detailed than that.... Edwardkenway, popeye the sailor, lmagna and 4 others 7 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow"
Javlin Posted February 10, 2021 Author #73 Posted February 10, 2021 The copit is basically finished I did make the frames for the back of the seat on the radio operator.I just took some .020" square stryene put needle nose to the stryene and channel locks to the needle nose and got a flat spot then cut the angles to the back of the seat worked well.I am not reaL fond of the pilots belts but think the radio seat looks a little more animated.The bomb sight was the last thing I did tonight it was testing the patience. Kevin Baker, Old Collingwood, Jack12477 and 12 others 15 Quote
Old Collingwood Posted February 10, 2021 #74 Posted February 10, 2021 Looking excellent. OC. Javlin, popeye the sailor, Egilman and 5 others 8 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Edwardkenway Posted February 10, 2021 #75 Posted February 10, 2021 Very nice detail Kevin 😉 Egilman, Old Collingwood, lmagna and 4 others 7 Quote Current builds; Henry Ramey Upcher 1:25 Providence whaleboat- 1:25 HMS Winchelsea 1764 1:48 Completed: HM Cutter Sherbourne- 1:64- finished Triton cross section scratch- 1:60 - finished Non ship: SBD-3 Dauntless 1:48 Hasegawa -FINISHED
popeye the sailor Posted February 10, 2021 #76 Posted February 10, 2021 very nice cockpit........quite a bit of detail. really looks good Edwardkenway, Egilman, Old Collingwood and 4 others 7 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
Javlin Posted February 11, 2021 Author #77 Posted February 11, 2021 I did not see were else this would be appropriate so clutter this one up but it is pretty coll a Type VII sub 1/48 with forward firing tubes RC take a look. lmagna, popeye the sailor, Canute and 6 others 8 1 Quote
popeye the sailor Posted February 17, 2021 #78 Posted February 17, 2021 cool video.......pretty ingenious! Egilman, Old Collingwood, mtaylor and 3 others 6 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
Javlin Posted February 22, 2021 Author #79 Posted February 22, 2021 Not alot to show just sub-assemblies I also have the engines painted black only ATTM.The straps on the tanks black/silver?This is one tight fitting kit so much almost scares you and you have to look at the instructions more than twice been lucky to back out more than once.Have you ever heard the story of the Dragon instructions for the Scharnhorst..............? hof00, Danstream, Edwardkenway and 7 others 10 Quote
Old Collingwood Posted February 22, 2021 #80 Posted February 22, 2021 38 minutes ago, Javlin said: Not alot to show just sub-assemblies I also have the engines painted black only ATTM.The straps on the tanks black/silver?This is one tight fitting kit so much almost scares you and you have to look at the instructions more than twice been lucky to back out more than once.Have you ever heard the story of the Dragon instructions for the Scharnhorst..............? Was like that on my Mossie build - kind of get one chance of snap fitting some of the assemblies to the main fuse. OC. Landlubber Mike, lmagna, Javlin and 5 others 8 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Danstream Posted February 23, 2021 #81 Posted February 23, 2021 I like the work you are doing on this Mossie. Waiting to see more, Dan. popeye the sailor, Edwardkenway, Old Collingwood and 5 others 8 Quote Current build : Mayflower - AL 1:64, Lady Nelson - Amati Victory 1:64 Completed non-ship builds : Spitfire MK I - 1:48, Arado 196B - 1:32, Sea Fury - 1:48, F-15C Eagle - 1:48, Hawker Tempest Mk.V - 1:48, F104S Starfighter - 1:48 "The most effective way to do it, is to do it" - Amelia Earhart
Javlin Posted February 24, 2021 Author #82 Posted February 24, 2021 Thks Dan.I have it on good advice from the fella in Canada working on the restoration of a Mossie up there straps area grey-green so they were completed last night and the wing finished and fitted to the fuse just not glued up yet.The engines ......how far do I go? Kevin Canute, Old Collingwood, Egilman and 3 others 6 Quote
popeye the sailor Posted February 25, 2021 #83 Posted February 25, 2021 super progress........ Egilman, Edwardkenway, Javlin and 2 others 5 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
Javlin Posted July 15, 2023 Author #84 Posted July 15, 2023 Shes back on the table figure maybe 2/3 wks biggest part was figuring were I left off.I decided to do zilch with the engines close them up and turn her into a PRU bird with D-day Stripes. Old Collingwood, Egilman, yvesvidal and 5 others 8 Quote
Javlin Posted July 16, 2023 Author #85 Posted July 16, 2023 The wing is now glued into place and masking has begun. mtaylor, BLACK VIKING, Jack12477 and 11 others 14 Quote
Canute Posted July 16, 2023 #86 Posted July 16, 2023 Your Mossie is coming along nicely, Kevin. BLACK VIKING, Jack12477, CDW and 5 others 7 1 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild
Javlin Posted July 24, 2023 Author #87 Posted July 24, 2023 I have finally got some paint laid boys and I think it looks pretty close to PRU Blue not exact but their seemed to be some variances even back in the day.The first pic wasa Soviet blue but said not quite to much baby blue so looked at some more color chips and pics.The second pic is the same blue with about 25% intermediate blue needed a little grey introduced.The last pic is off the net and we do not if the color has been saturated or not. mtaylor, ccoyle, realworkingsailor and 11 others 14 Quote
Javlin Posted July 24, 2023 Author #88 Posted July 24, 2023 Fuel Tanks painted,Cleared and Stripes revealed. Canute, king derelict, Old Collingwood and 9 others 12 Quote
Javlin Posted July 27, 2023 Author #89 Posted July 27, 2023 All the decals have been applied and the final gloss coat taken care of.The hatch is one of the last pieces I need to apply along with a whip antenna no aerial wire on this one.I did lose one of the hinges for the hatch in the copit with just enough frigg'in glue to make it stick somewhere plane was inverted. Old Collingwood, hof00, Egilman and 6 others 9 Quote
Javlin Posted July 29, 2023 Author #90 Posted July 29, 2023 (edited) Time to hit the cabinet with this one fellas.I will never ATTM use a liquid mask (suggestions anyone) it was a bear to get off the ALL the glass were it was applied.I had to use alcohol to remove and then polish everything with Mequiars added another 2/3 hrs of work.I like her was an enjoyable kit over all much like the B-25.The next one to hit the desk is another off the SOD a 1/32 Trumpter P-47 D Montex Mask. Edited July 29, 2023 by Javlin ccoyle, Roger Pellett, Landlubber Mike and 10 others 12 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.