Papa Posted March 2, 2022 Share #91 Posted March 2, 2022 On 12/3/2021 at 12:33 PM, Cathead said: Please tell me there's more than just that page! Those instructions look much like what i had with my “yellow box” Essex kit back in 1968. Sort of “we have given you some wood, some fittings, a few blocks. Now go make a ship. Good luck”. mbp521 and John Ruy 2 Quote Link to comment Share on other sites More sharing options...
John Ruy Posted March 3, 2022 Author Share #92 Posted March 3, 2022 Lighting on Main Deck… Main Deck lighting has been placed and I am now ready to attached the sub decking for the Boiler Deck. Boiler Deck sub decking fitted and ready for installation. Let the fun begin… 🍻 GrandpaPhil, toms10, AlleyCat and 6 others 9 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
John Ruy Posted March 3, 2022 Author Share #93 Posted March 3, 2022 Railings, Lots of railings… I began the process of building deck railings. No wonderful etched brass fittings in this “kit”. 😆 I drew out a template on paper and used rubber cement to attach the deck posts made of 1/16 x 1/16 basswood. Then using Gel CA glue I attached 1/32 x 1/32 basswood rails across the posts. Using 1/32 x 1/64 basswood I have attached stanchions with CA glue. The top rail will be Cherry Wood cut from 1/32 Cherry wood sheet at a 2 mm width. I hope I can speed this up a bit, this first section took me a hour to assemble and paint. Very tedious to say the least, quite maddening like the paddle wheels. As you can see here, LOTS OF RAILING! Onwards… 🍻 KurtH, mbp521, toms10 and 6 others 9 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
Cathead Posted March 4, 2022 Share #94 Posted March 4, 2022 I personally think railings are the worst part of steamboat modeling. mbp521 1 Quote Eric Current builds: scratchbuilt Missouri River steamboat Peerless (1893); 1:1 scale timber-framed outdoor kitchen Nautical builds (kits): USS Cairo; NRG capstan project; NRG half-hull; Viking longship; US revenue cutter; 18th century longboat; Bounty launch Missouri River craft (scratchbuilt): 1853 Missouri River steamboat Arabia; 1865 steamboat Bertrand; Lewis & Clark barge; keelboat; 1876 steamboat Far West Link to comment Share on other sites More sharing options...
John Ruy Posted March 4, 2022 Author Share #95 Posted March 4, 2022 48 minutes ago, Cathead said: I personally think railings are the worst part of steamboat modeling. I agree, and I thought paddle wheels were tedious. 😆 Particularly given the scale, but I have the solution. Still have to figure out all the Victorian Drape. 🤨 Cathead and mbp521 2 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
John Ruy Posted March 5, 2022 Author Share #96 Posted March 5, 2022 Boiler Deck… More creative clamping… Boiler Deck is now in place. Deck 2 of 4… Main Deck Lighting also in place. Here are few photos of the lighted views. Engine Room… Fore Cabin and wood pile. 😎 Grand Stairway now in place. Started planking the boiler deck. Cheers 🍻 AlleyCat, Cathead, gsdpic and 7 others 10 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
toms10 Posted March 9, 2022 Share #97 Posted March 9, 2022 (edited) On 3/4/2022 at 9:00 AM, Cathead said: I personally think railings are the worst part of steamboat modeling. Yes, kind of like tying thousands of clove hitches for ratlines. But they certainly do enhance the detail work and bring out the "wow" factor. This is the kind of stuff that separates many models from toys. John, your model is definitely not looking like a toy. Fantastic job, I love the little split wood pile. Tom Edited March 9, 2022 by toms10 John Ruy, Cathead and mbp521 3 Quote Attitude is the difference between ordeal and adventure. Finished: Charles W. Morgan, scratch 1:96 https://modelshipworld.com/topic/30666-charles-w-morgan-1841-scratch-196-pob-by-toms10 Finished: HMS Leopard, scratch 1:85 https://modelshipworld.com/gallery/album/2403-hms-leopard-scale-185 Finished: Constellation AL Kit, scale - 1:85 http://modelshipworld.com/index.php?/gallery/album/1383-constellation-al-185-by-tom-szabo/ Link to comment Share on other sites More sharing options...
John Ruy Posted March 10, 2022 Author Share #98 Posted March 10, 2022 Railings 2.0… Thought I could do a better version of railing. After all, it will be a very large portion of the detail. Better spaced stanchions… Water/ammonia soak and shaping. Kitchen Deck Railing placed. Just the beginning, but a good start. Boiler Deck Planking completed. Decking ready for staining and sealing. Onwards to more walls, windows, doors and railings. 🍻 GrandpaPhil, yvesvidal, KurtH and 3 others 6 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
John Ruy Posted March 16, 2022 Author Share #99 Posted March 16, 2022 (edited) Rear kitchen deck stairway. Back to the Boiler Deck… 🍻 Edited March 16, 2022 by John Ruy Cathead, yvesvidal, KurtH and 3 others 6 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
ccoyle Posted March 16, 2022 Share #100 Posted March 16, 2022 James Hatch is our resident tech guru. mbp521 and John Ruy 2 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, Bf 109E-7/trop Link to comment Share on other sites More sharing options...
gsdpic Posted March 16, 2022 Share #101 Posted March 16, 2022 John....nice work on the railings! Check the pinned posts in the "How to use the MSW forum" for hints on the picture rotation...there's one on how to upload photos and one on a free picture resizer program. I have not used the latter but it indicates it also fixes rotation problems. It is for windows, not sure what you are using for posting. mbp521 and John Ruy 2 Quote - Gary Current Build: Artesania Latina Sopwith Camel Completed Builds: Blue Jacket America 1/48th Annapolis Wherry Link to comment Share on other sites More sharing options...
John Ruy Posted March 16, 2022 Author Share #102 Posted March 16, 2022 4 hours ago, gsdpic said: It is for windows, not sure what you are using for posting. Thanks, I’m using an iPhone. However, I did discover that resizing the iPhone photo to a landscape aspect ratio did allow for the proper upload you see on this post. Thanks for your compliment on my railings. Got to get this right, there are so many Victorian influences in the design of these floating hotels. John mbp521, AlleyCat and gsdpic 3 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
John Ruy Posted March 16, 2022 Author Share #103 Posted March 16, 2022 Boiler Deck planking completed… Now for lots more windows and doors. 😆 🍻 KurtH, mbp521, yvesvidal and 2 others 5 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
John Ruy Posted March 20, 2022 Author Share #104 Posted March 20, 2022 Boiler Deck Furnishings… Began framing for the State Rooms and Saloon. Like the Main Deck, the framing will all have to be plumb along a slightly curved deck. 🤨 Installed transom over the Grand Stairway. Preparing framing for the railing at the head of the Grand Stairway. Of course these are curved railings. 🤨 Railings placed… Basswood .03 x .02 wood strips will be used for the railing stanchions. Cut rail cap from 1/32” Cherry sheet. I think 🤔 this is going to work. I’ll give it a final buffing tomorrow and try staining. About 3 hours for this little piece of work. 🤨 This is getting to be serious work now. 😆 Later… Cheers 🍻 GrandpaPhil, mbp521, Altduck and 8 others 11 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
Toolman Posted March 21, 2022 Share #105 Posted March 21, 2022 John, your craftsmanship is fantastic. I have a smaller vintage Robot E Lee kit made by Scientific. Rather crude but I will build it. Following along. John Ruy and mbp521 2 Quote Link to comment Share on other sites More sharing options...
John Ruy Posted March 21, 2022 Author Share #106 Posted March 21, 2022 Boiler Deck edging and guard… Also adding the vertical Timbers on the superstructure, engine room and Wheel House. Baby steps, in it for the long haul. Steady as she goes… 🍻 GrandpaPhil, oneslim, gsdpic and 4 others 7 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
mbp521 Posted March 21, 2022 Share #107 Posted March 21, 2022 Great job on the railing John. Hope the bandaid isn’t symbolic of a mishap on the railing construction. Those #11’s can be quite sharp 😄. -Brian John Ruy 1 Quote Current Builds: Completed Builds: Mississippi River Towboat Caroline N. HMB Endeavor: Artesania Latina USS Constitution - Cross Section: Mamoli Non-Ship Builds: HMS Victory - Cross Section: Corel New Shipyard King of the Mississippi - Steamboat: Artesania Latina Battle Station Section: Panart (Gallery) In Dry-dock Chaperon - 1884 Steamer: Model Shipways USS Constellation: Aretesania Latina USS Cairo - 1862 Ironclad: Scratch Build Flying Fish: Model Shipways Link to comment Share on other sites More sharing options...
John Ruy Posted March 21, 2022 Author Share #108 Posted March 21, 2022 9 hours ago, mbp521 said: Those #11’s can be quite sharp 😄. Yep, occupational hazard. Bandaids are a must have in the tool box. Don’t want blood stains on the decks. No worries, it’s just a scratch. 😆 mbp521, Cathead and AlleyCat 2 1 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
Toolman Posted March 21, 2022 Share #109 Posted March 21, 2022 Would you be able to provide a list of the n scale doors and windows and the Qty ? Your help would be greatly appreciated. John Ruy 1 Quote Link to comment Share on other sites More sharing options...
John Ruy Posted March 21, 2022 Author Share #110 Posted March 21, 2022 19 minutes ago, Toolman said: Would you be able to provide a list of the n scale doors and windows and the Qty ? Your help would be greatly appreciated. Sent you a PM… Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
John Ruy Posted March 22, 2022 Author Share #111 Posted March 22, 2022 Superstructure Framing… Onwards… 🍻 GrandpaPhil, ccoyle, yvesvidal and 4 others 7 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
John Ruy Posted March 24, 2022 Author Share #112 Posted March 24, 2022 Superstructure framing (port side) As for the port side, I want to leave the Engine Room and Paddle Wheel visible. Created see thru walls with clear plastic, retrieved from the recycle bin ♻️ 😎 port side superstructure framing completed. Visible Engine Room Paddle Wheel structure visible. We will leave a light on for you. 😆 Cathead, GrandpaPhil, mbp521 and 2 others 5 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
John Ruy Posted March 24, 2022 Author Share #113 Posted March 24, 2022 Boiler Cat Walk access… As I was contemplating 🤔 The companion ways and staircases, I realized there was no access to the Boiler Cat Walk or Forward Cabins on the Main Deck. Upon closer inspection of the drawing I found the “ladder” to the cat walk. Very strange this was not in the instructions. Oh wait, there were no instructions. Attention to detail does matter. 🤨 So I conjured up a couple of ladders 🪜 Turns out to be a great little detail next to the wood pile. 😎 Moving on to the Boiler Deck with its Saloon and State Rooms. Of course, we don’t want to forget those Railings… Cheers 🍻 GrandpaPhil, KurtH, mbp521 and 4 others 7 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
MrBlueJacket Posted March 24, 2022 Share #114 Posted March 24, 2022 I'm a huge fan of interior reveals! mbp521 and John Ruy 2 Quote Link to comment Share on other sites More sharing options...
John Ruy Posted March 25, 2022 Author Share #115 Posted March 25, 2022 Completed Railings at the top of the Grand Stairway. Cheers 🍻 mbp521, gsdpic, KurtH and 8 others 11 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
mbp521 Posted March 25, 2022 Share #116 Posted March 25, 2022 Very nicely done John. Big fan of the lighting. I find that it just adds just the right amount of realism to the build along with highlighting some of the otherwise hidden details. -Brian AlleyCat and John Ruy 1 1 Quote Current Builds: Completed Builds: Mississippi River Towboat Caroline N. HMB Endeavor: Artesania Latina USS Constitution - Cross Section: Mamoli Non-Ship Builds: HMS Victory - Cross Section: Corel New Shipyard King of the Mississippi - Steamboat: Artesania Latina Battle Station Section: Panart (Gallery) In Dry-dock Chaperon - 1884 Steamer: Model Shipways USS Constellation: Aretesania Latina USS Cairo - 1862 Ironclad: Scratch Build Flying Fish: Model Shipways Link to comment Share on other sites More sharing options...
John Ruy Posted March 29, 2022 Author Share #117 Posted March 29, 2022 Furnishing the Boiler Deck continues… Assuring wall framing is plumb on a curved deck. Hog Framing placed through the boiler deck. Cutting in the Stern Windows. Stern Windows in place. Windows and Doors for the State Rooms. Only nine more of these walls for this deck. I will paint these and place the glazing in the widows before gluing them in place. Construction is a bit tedious given the window alignment and board and batten siding. Servers hours required for each state room. But that’s what we live for, right. 🤪 Its all about the detail. Cheers 🍻 KurtH, Nunnehi (Don), DanB and 7 others 10 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
John Ruy Posted March 30, 2022 Author Share #118 Posted March 30, 2022 State Room walls… Framing progress… I have a plan now 😆 Boiler Deck Stern State Rooms completed. Cheers 🍻 yvesvidal, Cathead, KurtH and 3 others 6 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
John Ruy Posted April 1, 2022 Author Share #119 Posted April 1, 2022 State Rooms continue… Onwards… 🍻 GrandpaPhil, KurtH, DanB and 5 others 8 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
John Ruy Posted April 6, 2022 Author Share #120 Posted April 6, 2022 (edited) More Windows… … and more framing for more windows. 🤪 Repetition does make for improved carpentry skills. Vintage photo (courtesy Floyd County Library) of the Hey Day of Shipbuilding in New Albany, IN. On the Ohio River bank with 1000s of carpenters and many tons of lumber. Cheers 🍻 Edited April 6, 2022 by John Ruy KurtH, Ryland Craze, Cathead and 2 others 5 Quote Gallery Photos of My Charles W Morgan Currently working on New Bedford Whale Boat Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.